journal article·2012-12

Effect of the Growth Velocity on Microstructure, Orientation, and Magnetostriction in Fe81Ga19 Alloy

Chuan Li, Jinghua Liu, Chengbao Jiang

Publisher page

Abstract

Polycrystalline Fe81Ga19 rods were directionally solidified by an induction heating zone melting method at different growth velocities. The microstructure, preferred orientation, and magnetostriction were investigated. As the growth velocity increased, the solidification morphology transited from columnar to equiaxed. Simultaneously, the solid/liquid interface morphology evolved from planar to cellular, accompanied by an increase in the interface concave height. The 〈001〉 preferred orientation was detected along the axial direction of the grown rod at 10 mm/h. With the increased growth velocity, the 〈001〉 preferred orientation deviated from the axial direction, and the 〈001〉 orientation degree was weakened. The saturation magnetostriction of the grown rod was 305 ppm at 10 mm/h, but it deteriorated at higher velocities. The decreased magnetostriction was attributed to the microstructure transition and the weakened 〈001〉 preferred orientation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Applications · Solidification and crystal growth phenomena · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. T. Ueno, E. Summers, M. Wun-Fogle, and T. Higuchi: Sens. Actuators A, 2008, vol. 14, pp. 8280–84.
2. B. Adolphi, J. McCord, M. Bertram, C.G. Oertel, U. Merkel, U. Marschner, R. Schäfer, C. Wenzel, and W.J. Fischer: Smart Mater. Struct., 2010, vol. 19, pp. 55013–19.10.1088/0964-1726/19/5/055013 ↗
3. T.A. Lograsso, A.R. Ross, D.L. Schlagel, A.E. Clark, and W. Wun-Fogle: J. Alloys Compd., 2003, vol. 350, pp. 95–101.10.1016/S0925-8388(02)00933-7 ↗
4. R.A. Kellogg, A.M. Russell, T.A. Lograsso, A.B. Flatau, A.E. Clark, and M. Wun-Fogle, Acta Mater., 2004, vol. 52, pp. 5043–50.10.1016/j.actamat.2004.07.007 ↗
5. S. Datta, J. Atulasimha, and A.B. Flatau: J. Magn. Magn. Mater., 2009, vol. 321, pp. 4017–31.10.1016/j.jmmm.2009.07.067 ↗
6. A.E. Clark, J.B. Restorff, M. Wun-Fogle, T.A. Lograsso, and D.L. Schlagel: IEEE Trans. Magn., 2000, vol. 36, pp. 3238–40.10.1109/20.908752 ↗
7. A.E. Clark, M. Wun-Fogle, J.B. Restorff, T.A. Lograsso, and J.R. Cullen: IEEE Trans. Magn., 2001, vol. 37, pp. 2678–80.10.1109/20.951272 ↗
8. R.A. Kellogg, A.B. Flatau, A.E. Clark, M. Wun-Fogle, and T.A. Lograsso: J. Appl. Phys., 2002, vol. 91, pp. 7821–23.10.1063/1.1452216 ↗
9. E.M. Summers, T.A. Lograsso, and M. Wun-Fogle: J. Mater. Sci., 2007, vol. 42, pp. 9582–94.10.1007/s10853-007-2096-6 ↗
10. C. Li, J. Liu, C. Jiang, and H. Xu: Acta Phys. Sin., 2011, vol. 60, pp. 630–34.
11. C. Ji, J. Li, W. Ma, and Y. Zhou: J. Alloys Compd., 2002, vol. 333, pp. 291–95.10.1016/S0925-8388(01)01734-0 ↗
12. C. Jiang, S. Zhou, and R. Wang: Chin. Phys. Lett., 1998, vol. 15, pp. 379–81.10.1088/0256-307X/15/5/025 ↗
13. C. Jiang, S. Zhou, H. Xu, and R. Wang: Mater. Sci. Eng. B, 1999, vol. 58, pp. 191–94.10.1016/S0921-5107(98)00319-5 ↗
14. J. Zhou and J. Li: Physica B, 2008, vol. 403, pp. 3932–36.10.1016/j.physb.2008.07.019 ↗
15. M. Gu, J. Zhou, and J. Li: J. Alloys Compd., 2007, vol. 441, pp. 81–84.10.1016/j.jallcom.2006.09.067 ↗
16. J. Zhou and J. Li: J. Alloys Compd., 2008, vol. 461, pp. 113–16.10.1016/j.jallcom.2007.06.101 ↗
17. Y. Zhao, C. Jiang, H. Zhang, and H. Xu: J. Alloys Compd., 2003, vol. 354, pp. 263–28.10.1016/S0925-8388(03)00019-7 ↗
18. T.D. Hatchard, A.E. George, S.P. Farrell, M.O. Steinitz, C.P. Adams, M. Cormier, and R.A. Dunlap: J. Alloys Compd., 2010, vol. 494, pp. 420–25.10.1016/j.jallcom.2010.01.066 ↗
19. A. Kumagai, A. Fujita, K. Fukamichi, K. Oikawa, R. Kainuma, and K. Ishida: J. Magn. Magn. Mater., 2004, vol. 272, pp. 2060–61.10.1016/j.jmmm.2003.12.827 ↗
20. E. Summers, T.A. Lograsso, and J.D. Snodgrass: Smart Mater. Struct., 2004, vol. 5387, pp. 448–59.
21. N. Srisukhumbowornchai and S. Guruswamy: J. Appl. Phys., 2001, vol. 90, pp. 5680–88.10.1063/1.1412840 ↗
22. S. Guruswamy, N. Srisukhumbowornchai, A.E. Clark, J.B. Restorff, and M. Wun-Fogle: Scripta Mater., 2000, vol. 43, pp. 239–44.10.1016/S1359-6462(00)00397-3 ↗
23. M. Lima and W. Kurz: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2337–45.10.1007/s11661-002-0357-1 ↗
24. H. Okamoto: Monograph Series on Alloy Phase Diagrams, No. 9, ASM International, OH, 1993, p. 472.
25. C. Dasarathy and W. Hume-Rothery: Proc. R. Soc. London, Ser. A, 1965, vol. 286, pp. 141–57.10.1098/rspa.1965.0135 ↗
26. O. Ikeda, R. Kainuma, I. Ohnuma, K. Fukamichi, and K. Ishida: J. Alloys Compd., 2002, vol. 347, pp. 198–205.10.1016/S0925-8388(02)00791-0 ↗
27. Q. Xing, Y. Du, R.J. McQueeney, and T.A. Lograsso: Acta Mater., 2008, vol. 56, pp. 4536–46.10.1016/j.actamat.2008.05.011 ↗