Sensitiveness of Magnetic Inductive Parameters for the Characterization of Recovery and Recrystallization in Cold-Rolled Low-Carbon Steel
Source abstract
Abstract
The efficacy of some magnetic inductive parameters and of the maximum differential permeability derived from magnetic hysteresis loop measurements is studied in terms of nondestructively monitoring recovery and the onset and the progress of recrystallization in a cold-rolled low carbon steel. The remnant induction, which is known to be affected by the dislocation density, proved useful to monitor recovery, whereas the induction values measured at higher magnetic fields are not sensitive enough. In order to differentiate between contributions from crystal orientation and from changes in microstructure, the effect of texture evolution during recrystallization is analyzed in terms of the average magnetocrystalline energy. All the magnetic inductive parameters considered have proven to be able to characterize the recrystallized fraction when the usual weakening in the intensity of α fiber components and the enhancement of γ fiber components took place during recrystallization.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, United Kingdom, 1996, pp. 1–3.
2. S.M. Thompson and B.K. Tanner: J. Magn. Magn. Mater., 1994, vol. 132, pp. 71–88.10.1016/0304-8853(94)90302-6 ↗
3. F.J.G. Landgraf and M. Emura: J. Magn. Magn. Mater., 2002, vols. 242–245, pp. 152–56.10.1016/S0304-8853(01)01184-2 ↗
4. V.E. Iordache, E. Hug, and N. Buiron: Mater. Sci. Eng., 2003, vol. A359, pp. 62–74.10.1016/S0921-5093(03)00358-7 ↗
5. K. Eloot, A. De Paepe, J. Dilewijns, and C. Standaert: J. Magn. Magn. Mater., 1996, vols. 157–158, pp. 459–60.10.1016/0304-8853(95)01061-0 ↗
6. M.A. da Cunha and S.C. Paolinelli: J. Magn. Magn. Mater., 2003, vols. 254–255, pp. 379–81.10.1016/S0304-8853(02)00912-5 ↗
7. A.R. Ali, Z.M. Farid, and F.Z. Ghobrial: Z. Phys. B, 1994, vol. 94, pp. 227–32.10.1007/BF01320673 ↗
8. B.D. Cullity: Introduction to Magnetic Materials, Addison-Wesley Publishing Company, Reading, MA, 1972, pp. 236–37.
9. B. de Boer and J. Wieting: Scripta Mater., 1997, vol. 37, pp. 753–60.10.1016/S1359-6462(97)00170-X ↗
10. T. Tomida and S. Uenoya: IEEE Trans. Magn., 2001, vol. 37, pp. 2318–20.10.1109/20.951159 ↗
11. Y.B. Cai and S.K. Chang: ISIJ Int., 2007, vol. 47, pp. 1680–86.10.2355/isijinternational.47.1680 ↗
12. F.J.G. Landgraf, M. Emura, J.C. Teixeira, M.F. de Campos, and C.S. Muranaka: J. Magn. Magn. Mater., 1999, vols. 196–197, pp. 380–81.10.1016/S0304-8853(98)00763-X ↗
13. F.J.G. Landgraf, M. Emura, J.C. Teixeira, and M.F. de Campos: J. Magn. Magn. Mater., 2000, vols. 215–216, pp. 97–99.10.1016/S0304-8853(00)00076-7 ↗
14. M. Emura, M.F. de Campos, F.J.G. Landgraf, and J.C. Teixeira: J. Magn. Magn. Mater., 2001, vols. 226–230, pp. 1524–26.10.1016/S0304-8853(00)00946-X ↗
15. R.C. Hudd: in Materials Science Technology, F.B. Pickering, ed., VCH, Weinheim, Germany, 1991, vol. 7, pp. 219–84.
16. W.B. Hutchinson: Int. Met. Rev., 1984, vol. 29, pp. 25–42.10.1179/imtr.1984.29.1.25 ↗
17. J.L. Bocos, E. Novillo, M.M. Petite, A. Iza-Mendia, and I. Gutierrez: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 827–39.10.1007/s11661-003-0117-x ↗
18. A. Martínez-de-Guerenu, F. Arizti, M. Díaz-Fuentes, and I. Gutiérrez: Acta Mater., 2004, vol. 52, pp. 3657–64.10.1016/j.actamat.2004.04.019 ↗
19. A. Martínez-de-Guerenu, F. Arizti, and I. Gutiérrez: Acta Mater., 2004, vol. 52, pp. 3665–70.10.1016/j.actamat.2004.04.020 ↗
20. A. Martínez-de-Guerenu, K. Gurruchaga, and F. Arizti: J. Magn. Magn. Mater., 2007, vol. 316, pp. e842–e845.10.1016/j.jmmm.2007.03.110 ↗
21. M. Oyarzabal, K. Gurruchaga, A. Martínez-de-Guerenu, and I. Gutierrez: ISIJ Int., 2007, vol. 47, pp. 1458–64.10.2355/isijinternational.47.1458 ↗
22. A. Martínez-de-Guerenu, M. Oyarzabal, F. Arizti, and I. Gutiérrez: Mater. Sci. Forum, 2005, vols. 500–501, pp. 647–54.10.4028/www.scientific.net/MSF.500-501.647 ↗
23. K. Gurruchaga, A. Martínez-de-Guerenu, M. Soto, and F. Arizti: IEEE Trans. Magn., 2008, vol. 44 (11), pp. 3839–42.10.1109/TMAG.2008.2001504 ↗
24. M. Soto, A. Martínez-de-Guerenu, K. Gurruchaga, and F. Arizti: IEEE Trans. Instrum. Meas., 2009, vol. 58 (5), pp. 1746–55.10.1109/TIM.2009.2014510 ↗
25. J.G. Byrne: Recovery, Recrystallization and Grain Growth, The Macmillan Company, New York, NY, 1965.
26. J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982, p. 62.
27. E.T. Stephenson and A.R. Marder: IEEE Trans. Magn., 1986, vol. 22, pp. 101–06.10.1109/TMAG.1986.1064281 ↗