journal article·2003-05

Strength of SCS-6 fibers in a Tiβ21s/SCS-6 composite before and after fatigue

Jun Liu, Paul Bowen

Publisher page

Abstract

The strength distributions of SCS-6 fibers extracted from both as-received (AR) and fatigued Tiβ21s/SCS-6 composite specimens have been characterized by single-fiber-tension tests and have then been analyzed statistically. With the assistance of fractography, the whole population of SCS-6 fibers in the composite can be cataloged into three subpopulations with fracture strengths, σF, of <2000, 2000 ≤ σF <3700, and ≥ 3700 MPa, respectively. Each subpopulation has distinctive statistical parameters, which do not appear to change markedly after fatigue. However, cyclic loading can reduce the average strength of the whole population by decreasing the percentage of high-strength fibers present. In addition, cyclic loading can also break some of the low-strength fibers. By using a trimodal Weibull function, the degradation of the strength of the fibers after fatigue, as well as the influence of such degradation of fiber strength on the fiber-bundle strength and then on the predicted fatigue crack growth resistance of the composite, have been analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · Occupational and environmental lung diseases

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. P. Bowen, D.C. Cardona, and A.R. Ibbotson: Mater. Sci. Eng., 1992, vol. A153 (1–2), pp. 628–34.10.1016/0921-5093(92)90262-Y ↗
2. D.B. Marshall, M.C. Shaw, and W.L. Morris: Acta Metall. Mater., 1992, vol. 40 (3), pp. 443–54.10.1016/0956-7151(92)90392-R ↗
3. D.L. Davidson: Metall. Trans. A, 1992, vol. 23A, pp. 865–79.10.1007/BF02675564 ↗
4. P.J. Cotterill and P. Bowen: Composites, 1993, vol. 24 (3), pp. 214–21.10.1016/0010-4361(93)90166-6 ↗
5. J.G. Bakuckas, Jr. and W.S. Johnson: J. Compos. Technol. Res., 1993 vol. 15 (3), pp. 242–55.10.1520/CTR10376J ↗
6. D.P. Walls, G. Bao, and F.W. Zok: Acta Metall. Mater., 1993, vol. 41 (7), pp. 2061–71.10.1016/0956-7151(93)90375-3 ↗
7. K.M. Fox, M. Strangwood, and P. Bowen: Composites, 1994, vol. 25 (7), pp. 684–91.10.1016/0010-4361(94)90202-X ↗
8. J.R. Jira and J.M. Larsen: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1413–24.10.1007/BF02665474 ↗
9. F.E. Wawner, Jr.: in Composite Materials Series, 2: Fibre Reinforcements for Composite Materials, A.R. Bunsell, eds., Elsevier Science Publishers B.V., Amsterdam, 1988, pp. 371–425.
10. J. Henshaw: Proc. 77th Meeting of the AGARD Structures and Materials Panel, Bordeaux, France, Sept. 27–28, 1994, Specialised Printing Services Limited, Loughton, Essex, United Kingdom, 1994, p. 3–1.
11. M.L. Gambone: Scripta Mater., 1996, vol. 34 (3), pp. 507–12.10.1016/0956-716X(95)00546-8 ↗
12. M.L. Gambone and F.E. Wawner: J. Compos. Mater., 1997, vol. 31 (11), pp. 1062–79.10.1177/002199839703101101 ↗
13. H. Assler and P.W.M. Peters: Key Eng. Mater., 1997, vols. 127–131, pp. 1241–49.10.4028/www.scientific.net/KEM.127-131.1241 ↗
14. M.L. Gambone and D.B. Gundel: Key Eng. Mater., 1997, vols. 127–131, pp. 1251–57.
15. S.J. Connell and F.W. Zok: Acta Mater., 1997, vol. 45 (12), pp. 5203–11.10.1016/S1359-6454(97)00146-8 ↗
16. P. Bowen, P.J. Cotterill, and A.R. Ibbotson: Proc. Conf. on Test Techniques for Metal Matrix Composites, N.D.G. Goddard, eds., Institute of Physics, London, 1991, p. 82.
17. J. Liu and P. Bowen: “Fatigue Crack Growth in a Tiβ21s/SCS-6 Composite,” Acta Mater., in press.
18. ASTM Standards and Literature References for Composite Materials, 2nd ed., ASTM, Philadelphia, PA, 1990.
19. B. Dodson: Weibull Analysis, ASQC Quality Press, Milwaukee, WI, 1994, pp. 15.
20. T.W. Anderson and D.A. Darling: Ann. Math. Stat., 1952, vol. 23, pp. 193–212.10.1214/aoms/1177729437 ↗
21. T.W. Anderson and D.A. Darling: J. Am. Stat. Assoc., 1964, vol. 49, pp. 765–69.10.2307/2281537 ↗
22. R.B. D’Agostino and M.A. Stephens: Goodness-of-fit Techniques, Marcel Dekker, Inc., New York, NY, 1986, p. 104.
23. J.H. Bompas-Smith: Mechanical Survival, The Use of Reliability Data, R.H.W. Brook, eds., McGraw-Hill Book Company (UK) Limited, London, 1973, p. 61.
24. A. Kelly and N.H. MacMillan: Strong Solids, 3rd ed., Clarendon Press, Oxford, United Kingdom, 1986, p. 273.
25. J.M. Larsen, J.R. Jira, R. John, and N.E. Ashbaugh: in Life Prediction Methodology for Titanium Matrix Composites, ASTM STP 1253, W.S. Johnson, J.M. Larsen, and B.N. Cox, eds., ASTM, Philadelphia, PA, 1996, pp. 114–36.10.1520/STP18221S ↗
26. J. Liu and P. Bowen: Metall. Mater Trans. A, 2003, vol. 34A, pp. 1193–120210.1007/s11661-003-0139-4 ↗
27. J. Liu and P. Bowen: Proc. 11th Eur. Conf. on Fracture, J. Petit, J. de Fouquet, G. Henaff, P. Villechaise, and A. Dragon, eds., EMAS Ltd., Warley, United Kingdom, 1996, pp. 1143–48.
28. C.A. Johnson: Fracture Mechanics of Ceramics 5, R.C. Bradt, A.G. Evans, D.P.H. Hasselman, and F.F. Lange, eds., Plenum Press, New York, NY, 1985, p. 81.
29. E.G. Stoner, D.D. Edie, and S.D. Durham: J. Mater. Sci., 1994, vol. 29 (24), pp. 6561–74.10.1007/BF00354022 ↗
30. J. Liu and P. Bowen: Fatigue ’99, Proc. 7th Int. Fatigue Conf., X.R. Wu and Z.G. Wang, eds., Higher Education Press and EMAS, Beijing, 1999, pp. 1393–98.