Effect of Temperature on the Loss of Ductility of S-135 Grade Drill Pipe Steel and Characterization of Corrosion Products in CO2 Containing Environments
Source abstract
Abstract
Evaluation of loss of ductility of the API S-135 grade drill pipe steel was studied at different temperatures from 298 K to 448 K (25 °C to 175 °C) in CO2 containing solution using a constant extension rate test in connection with a high-temperature/high-pressure autoclave. The effect of temperature on the composition and morphology of corrosion product layers of this steel were also investigated using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Results indicated the change of loss of ductility with temperature and the maximum loss of ductility was observed at 448 K (175 °C). XRD studies of the specimens revealed the formation of iron carbonate on the surface. SEM study of the surface of the specimens showed a rhombohedric crystalline iron carbonate layer above 373 K (100 °C), while no FeCO3 was detected at temperatures below 373 K (100 °C). Also, the crack size and depth of the cracks increased with temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. M.B. Kermani and A. Morshed: Corrosion, 2003, vol. 59 (8), pp. 659–83.10.5006/1.3277596 ↗
2. J. Mougin, M.S. Cayard, R.D. Kane, B. Ghys, and C. Pichard: NACE, Houston, TX, 2005, paper no. 05085.
3. M. Nordsveen, S. Nes˘ic′, R. Nyborg, and A. Stangeland: Corrosion, 2003, vol. 59 (5), pp. 443–56.10.5006/1.3277576 ↗
4. M. Nordsveen, S. Nes˘ic′, R. Nyborg, and A. Stangeland: Corrosion, 2003, vol. 59 (6), pp. 489–97.10.5006/1.3277579 ↗
5. S. Nes˘ic′ and K.-L.J. Lee: Corrosion, 2003, vol. 59 (7), pp. 616–28.10.5006/1.3277592 ↗
6. S. Hernández, S. Nes˘ic′, G. Weckman, and V. Ghai: Corrosion, vol. 62 (6), pp. 467–83.10.5006/1.3279905 ↗
7. A. Dugstad: NACE, Houston, TX, 1998, paper no. 98031.
8. M. Singer, B. Brown, A. Camacho, and S. Nesic: NACE, Houston, TX, 2007, paper no. 07661.
9. B. Mishra, S. Al-Hassan, D.L. Olson, and M.M. Salama: Corrosion, 1997, vol. 53 (11), pp. 852–60.10.5006/1.3290270 ↗
10. B. Mishra, D.L. Olson, S. Al-Hassan, and M.M. Salama: Corrosion, 1998, vol. 54 (6), pp. 480–92.10.5006/1.3284876 ↗
11. C. De Dewaard and D.E. Milliams: Corrosion, 1975, vol. 31 (5), pp. 177–81.10.5006/0010-9312-31.5.177 ↗
12. M. Honarvar Nazari, S.R. Allahkaram, and M.B. Kermani: J. Mater. Design, 2010, vol. 31, pp. 3559–63.10.1016/j.matdes.2010.01.038 ↗
13. J. Han, D. Young, H. Colijn, A. Tripathi, and S. Nesic: Ind. Eng. Chem. Res., 2009, vol. 48, pp. 6296–6302.10.1021/ie801819y ↗
14. W. Sun and S. Nesic: Corrosion, 2008, vol. 64 (4), pp. 334–47.10.5006/1.3278477 ↗
15. S. Nešić: Corr. Sci., 2007, vol. 49 (12), pp. 4308–38.10.1016/j.corsci.2007.06.006 ↗
16. D.G. Li, Y.R. Feng, Z.Q. Bai, and M.S. Zheng: Appl. Surf. Sci., 2007, vol. 253, no. 20, pp. 8371–76.10.1016/j.apsusc.2007.04.011 ↗
17. E. Abelev, J. Sellberg, T.A. Ramanarayanan, and S.L. Bernasek: J. Mater. Sci., 2009, vol. 44, pp. 6167–81.10.1007/s10853-009-3854-4 ↗
18. G.A. Zhangand Y.F. Cheng: Corr. Sci., 2009, vol. 51 (8), pp. 1589–95.10.1016/j.corsci.2009.04.004 ↗
19. J.C. Charbonnier, H. Margot-Marette, A.M. Brass, and M. Aucouturier: Metall. Trans. A, 1985, vol. 16A, pp. 935–44.10.1007/BF02814846 ↗
20. R.B. Chandler, M.J. Jellison, J.W. Skogsberg, and T. Moore: NACE, Houston, TX, 2002, paper no. 02056.
21. R.D. Kane and M.S. Cayard: NACE, Houston, TX, 1998, paper no. 98274.
22. M. Elboujdaini and R.V. Revie: J. Solid State Electrochem., 2009, vol. 13, pp. 1091–99.10.1007/s10008-009-0799-0 ↗
23. A.R. Mack: NACE, Houston, TX, 2001, paper no. 01076.
24. B.-H. Choi and A. Chudnovsky: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 383–95.10.1007/s11661-010-0384-2 ↗
25. Y.-Z. Wang, R.W. Revie, and R.N. Parkins: NACE, Houston, TX, 1999, paper no. 99143.
26. R.N. Parkins: Corrosion, 1996, vol. 52 (5), pp. 363–75.10.5006/1.3292124 ↗
27. R.N. Parkins, W.K. Blanchard, Jr., and B.S. Delanty: Corrosion, 1994, vol. 50 (5), pp. 395–408.10.5006/1.3294348 ↗
28. R.N. Parkins: NACE, Houston, TX, 2000, paper no. 00363.
29. J.A. Colwell, B.N. Leis, and P.M. Singh: NACE, Houston, TX, 2005, paper no. 05161.
30. R.N. Parkins and S. Zhou: Corr. Sci., 1997, vol. 39 (1), pp. 159–73.10.1016/S0010-938X(96)00116-3 ↗
31. R.N. Parkins and S. Zhou: Corr. Sci., 1997, vol. 39 (1), pp. 175–91.10.1016/S0010-938X(97)89248-7 ↗
32. B. Gu, W.Z. Yu, J.L. Luo, X. Mao: Corrosion, 1999, vol. 55 (3), pp. 312–18.10.5006/1.3283993 ↗
33. B.Y. Fang, A. Atrens, J.Q. Wang, E.H. Han, Z. Zhu, and W. Ke: J. Mater. Sci., 2003, vol. 38, pp. 127–32.10.1023/A:1021126202539 ↗
34. A. Contreras, A. Albiter, M. Salazar, and R. Perez: Mater. Sci. Eng. A, 2005, vol. 407, pp. 45–52.10.1016/j.msea.2005.07.028 ↗
35. W. Yang, G. Li, H. Guo, J. Zhou, C. Huang, and J. Bai: Key Eng. Mater., 2005, vols. 297–300 pp. 939–44.10.4028/www.scientific.net/KEM.297-300.939 ↗
36. “Standard Test Method Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service,” NACE, Houston, TX, TM0198-2004.