journal article·2010-04

Magnetic Nondestructive Evaluation of Creep Behavior in Water-Quenched Modified 9Cr-1Mo Steel

J.N. Mohapatra, J. Swaminathan, M.K. Ghosh, A. Mitra

Publisher page

Abstract

Water-quenched modified 9Cr-1Mo steel was creep tested in the laboratory at a temperature of 600 °C and 125 MPa stress. Magnetic Barkhausen emissions (MBE) measurements were carried out by interrupting the test at different lengths of time. Creep damage in such steel was observed by an increase in root mean square (RMS) voltage of the MBE. The magnetic softening was corroborated with the decrease in pinning density in the material for the coarsening of carbides (M23C6) and formation of massive phases (Fe2Mo), which comes at the expense of a large number of finer carbides. Before failure, the rate of increase in RMS voltage of the MBE decreased due to the demagnetizing field offered by the massive phases. The microstructural analysis was carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. V.K. Sikka, G.T. Ward, and K.C Thomas: Am. Soc. Met., 1982, pp. 65–84.
2. E. Cerri, E. Evangelista, S. Spigarelli, and P. Bianchi: Mater. Sci. Eng., 1998, vol. A245, pp. 285–92.10.1016/S0921-5093(97)00717-X ↗
3. M.E. Abd El-Azim, A.M. Nasreldin, G. Zies, and A. Klenk: Mater. Sci. Technol., 2005, vol. 21, pp. 779–90.10.1179/174328405X43216 ↗
4. K. Laha, K.S. Chandravathi, K.B.S. Rao, and S.L. Mannan: J. Press. Vessel Piping, 1995, vol. 62, pp. 303–11.10.1016/0308-0161(94)00023-C ↗
5. D. Park, C.G. Kim, and J.-H. Hong: J. Magn. Magn. Mater., 2000, vols. 215–216, pp. 765–68.10.1016/S0304-8853(00)00282-1 ↗
6. V. Moorthy, S. Vaidyanathan, K. Laha, T. Jaykumar, K. Bhanu Sankara Rao, and B. Raj: Mater. Sci. Eng., 1997, vol. A231, pp. 98–104.10.1016/S0921-5093(97)00040-3 ↗
7. A. Mitra, Z.J. Chen, and D.C. Jiles: NDT E Int., 1995, vol. 28, pp. 29–33.10.1016/0963-8695(94)00002-2 ↗
8. A. Mitra, J.N. Mohapatra, J. Swaminathan, M. Ghosh, A.K. Panda, and R.N. Ghosh: Scripta Mater., 2007, vol. 57, pp. 813–16.10.1016/j.scriptamat.2007.07.004 ↗
9. J.N. Mohapatra, A.K. Panda, M.K. Gunjan, N.R. Bandyopadhysy, A. Mitra, and R.N. Ghosh: NDT E Int., 2007, vol. 40, pp. 173–78.10.1016/j.ndteint.2006.08.001 ↗
10. J.N. Mohapatra, A.K. Panda, M.K. Gunjan, and A. Mitra: J. Metall. Mater. Sci., 2006, vol. 48, pp. 169–73.
11. J.N. Mohapatra, A.K. Panda, and A. Mitra: J. Phys. D: Appl. Phys., 2009, vol. 42, pp. 95006–96011.10.1088/0022-3727/42/9/095006 ↗
12. J.N. Mohapatra, A.K. Ray, J. Swaminathan, and A. Mitra: J. Magn. Magn. Mater., 2008, vol. 320, pp. 2284–90.10.1016/j.jmmm.2008.04.152 ↗
13. M. Blaow, J.T. Evans, and B.A. Shaw: J. Magn. Magn. Mater., 2006, vol. 303, pp. 153–59.10.1016/j.jmmm.2005.07.034 ↗
14. F. Abe: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 305–11.10.1016/j.cossms.2004.12.001 ↗
15. A. Mitra and D.C. Jiles: J. Magn. Magn. Mater., 1997, vol. 168, pp. 169–76.10.1016/S0304-8853(96)00699-3 ↗
16. A. Mitra, Z.J. Chen, F. Laabs, and D.C. Jiles: Phil. Mag., 1997, vol. A75, pp. 847–59.10.1080/01418619708207206 ↗
17. D.C. Jiles and D.L. Atherton: J. Magn. Magn. Mater., 1986, vol. 61, pp. 48–60.10.1016/0304-8853(86)90066-1 ↗