journal article·2003-11

Fabrication and creep properties of superalloy-zirconia composites

R. K. Oruganti, A. K. Ghosh

Publisher page

Abstract

Graded composite interfaces have been proposed as a means to reduce thermally induced stresses between dissimilar materials. This is expected to be useful in applications such as ceramic thermalbarrier coatings (TBCs) on superalloy substrates. The interfaces, in such cases, are metal-matrix composites containing the ceramic phase within the superalloy matrix, whose creep properties during elevated-temperature service become critically important. This study was carried out to assess the creep properties of a typical superalloy-ceramic combination, namely, a Rene 95 alloy containing partially stabilized zirconia. Composites of these materials were prepared via powder metallurgy. Microscopy and X-ray work revealed that the zirconia reacted with γ′ (Ni3Al) to form Al2O3, which resulted in the depletion of γ′ from the matrix. The creep behavior of the composites was markedly different from that of the unreinforced matrix. In addition to showing different stress exponents, the composites were stronger than the unreinforced material at low strain rates and weaker at the higher strain rates. A composite load-transfer model is used to isolate the effect of particles on strengthening. It is found that strengthening by the ceramic particles is smaller than strengthening arising from the change in chemistry of the matrix due to the addition of ZrO2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. A. Mortensen and S. Suresh: Int. Mater. Rev., 1995, vol. 40, pp. 239–65.10.1179/imr.1995.40.6.239 ↗
2. H.E. Evans, A. Strawbridge, R.A. Carolan, and C.B. Ponton: Mater. Sci. Eng., 1997, vol. 225, pp. 1–8.10.1016/S0921-5093(96)10881-9 ↗
3. A.E. Giannakopoulos, S. Suresh, M. Finot, and M. Olson: Acta Metall. Mater., 1995, vol. 43 (4), pp. 1335–54.10.1016/0956-7151(94)00360-T ↗
4. G.W. Goward: Surface Coatings Technol., 1998, vols. 108–109, pp. 73–79.10.1016/S0257-8972(98)00667-7 ↗
5. Jon C. Schaffer, W.H. Murphy, W.B. Connor, B.A. Nagaraj, and H.B. Vakil: U.S. Patent No. 5,538,796, 1996.
6. H.P. Dillon: U.S. Patent No. 3,091,548, 1963.
7. T. Christman, A. Needleman, and S. Suresh: Acta Metall., 1989, vol. 37 (11), pp. 3029–50.10.1016/0001-6160(89)90339-8 ↗
8. S.K. Kang and R.C. Benn: Metall. Trans A., 1985, vol. 16A, pp. 1285–94.10.1007/BF02670333 ↗
9. W. Sha and H.K.D.H. Bhadeshia: Metall. Mater. Trans A., 1994, vol. 25A, pp. 705–14.10.1007/BF02665447 ↗
10. J.A. Domingue, W.J. Boesch, and J.F. Radavich: Superalloys, 1980, pp. 335–44.10.7449/1980/Superalloys_1980_335_344 ↗
11. C.E. Shamblen, R.E. Allen, and F.E. Walker: Metall. Trans., 1975, vol. 6, pp. 2073–82.10.1007/BF03161833 ↗
12. D. Lee and E.W. Hart: Metall. Trans., 1971, vol. 2, pp. 1245–48.10.1007/BF02664258 ↗
13. E.W. Hart, C.-Y. Li, H. Yamada, and G.L. Wire: Constitutive Equations in Plasticity, A.S. Argon, ed., MIT Press, Cambridge, MA, 1976, pp. 149–97.
14. David. V. Ragone: Thermodynamics of Materials, John Wiley, New York, NY, 1994.
15. E. Arzt, M.F. Ashby, and R.A. Verrall: Acta Metall., 1983, vol. 31 (12), pp. 1977–89.10.1016/0001-6160(83)90015-9 ↗
16. J.P. Dennison, P.D. Holmes, and B. Wilshire: Mater. Sci. Eng., 1978, vol. 33, pp. 35–47.10.1016/0025-5416(78)90151-9 ↗
17. J.C. Gibeling and W.D. Nix: Mater. Sci. Eng., 1980, vol. 45, pp. 123–35.10.1016/0025-5416(80)90218-9 ↗
18. Kyung-Tae Park, Enrique J. Lavernia, and Farghalli A. Mohamed: Acta Metall. Mater., 1990, vol. 38 (11), pp. 2149–59.10.1016/0956-7151(90)90082-R ↗
19. J-P.A. Immarigeon and P.H. Floyd: Metall. Trans., 1981, vol. 12A, pp. 1177–86.10.1007/BF02642331 ↗
20. T.E. Howson, W.H. Couts, and J.E. Coyne: Proc. 5th Int. Symp. on Superalloys, Champion, PA, Oct. 7–11, 1984, Maurice Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich, eds., pp. 275–84.10.7449/1984/Superalloys_1984_275_284 ↗
21. D. Mukherji, F. Jiao, W. Chen, and R.P. Wahi: Acta Metall. Mater., 1991, vol. 39 (7), pp. 1515–24.10.1016/0956-7151(91)90237-U ↗
22. R.A. Stevens and P.E.J. Flewitt: Acta Metall., 1981, vol. 29, pp. 867–82.10.1016/0001-6160(81)90129-2 ↗
23. U.F. Kocks: Phil. Mag., 1966, vol. 13, p. 541.10.1080/14786436608212647 ↗
24. E. Arzt and M.F. Ashby: Scripta Metall., 1982, vol. 1, pp. 1285–90.10.1016/0036-9748(82)90484-7 ↗
25. P.J. Henderson and M. McLean: Acta Metall., 1983, vol. 31 (8), pp. 1203–19.10.1016/0001-6160(83)90182-7 ↗
26. T.M. Pollock and A.S. Argon: Acta Metall., 1992, vol. 40 (1), pp. 1–30.10.1016/0956-7151(92)90195-K ↗
27. J. Weertman: J. Appl. Phys., 1955, vol. 26 (10), pp. 1213–17.10.1063/1.1721875 ↗
28. T.L. Dragone and W.D. Nix: Acta Metall. Mater., 1990, vol. 38 (10), pp. 1941–53.10.1016/0956-7151(90)90306-2 ↗
29. T.G. Nieh: Metall. Trans. A, 1984, vol. 15A, pp. 139–46.10.1007/BF02644396 ↗
30. Murray W. Mahoney and A.K. Ghosh: Metall. Trans. A, 1987, vol. 18A, pp. 653–61.10.1007/BF02649481 ↗
31. T.G. Nieh, K. Xia and T.G. Langdon: J. Eng. Mater. Technol., 1998, vol. 110, pp. 77–82.10.1115/1.3226033 ↗
32. Farghalli A. Mohamed: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2780–82.10.1007/s11661-997-0038-1 ↗
33. Y. Song and T.N. Baker: Mater. Sci. Technol., 1994, vol. 10, pp. 406–13.10.1179/mst.1994.10.5.406 ↗
34. Amit K. Ghosh and Ajoy Basu: in Critical Issues in the Development of High Temperature Structural Materials, N.S. Stoloff, D.J. Duquette, and A.F. Giamei, eds., TMS, Warrendale, Pa., 1993, pp. 291–302.
35. K. Sadananda and C.R. Feng: Mater. Sci. Eng., 1993, vol. 170, pp. 199–214.10.1016/0921-5093(93)90381-N ↗
36. A. Kelly and K.N. Street: Proc. R. Soc. London, Ser. A, Mathematical Physical Sci., 1972, vol. 328 (1573), pp. 283–93.
37. J. Rosler, G. Bao, and A.G. Evans: Acta Metall., 1991, vol. 39 (11), pp. 2733–38.10.1016/0956-7151(91)90090-N ↗
38. J.M. Duva: J. Eng. Mater. Technol., 1984, vol. 106, pp. 317–21.10.1115/1.3225723 ↗
39. D.-G.C. Syu and A.K. Ghosh: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2049–61.