journal article·2004-03

The cut-groove technique to infer interfacial effects during hot rolling

S. Das, E. J. Palmiere, I. C. Howard

Publisher page

Abstract

This article presents a novel experimental technique to infer the coupled effects of friction and heat transfer during the hot rolling of steels. The technique, termed the “cut-groove” method, relates the behavior of the deforming grooves cut on the strip surface to the local effects of friction and heat transfer. Validation of the experimentally observed groove shapes involved developing two-dimensional (2-D) and three-dimensional (3-D) finite-element (FE) models that employed a probabilistic distribution diagram (PDD). The PDD framework modeled the roll-strip interface and accounted for the variations in the oxide scale as distinct states that affect both friction and heat transfer. The numerically predicted groove openings are in good agreement with the experimentally observed groove shapes, particularly for the 2-D case. For the 3-D model, deviations are observed at regions close to the strip edges that are affected by nonplanar strain arising from spread during laboratory rolling.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Y.H. Li: Ph.D Dissertation, The University of Sheffield, Sheffield, United Kingdom, 1996.
2. M. Krzyzanowski and J.H. Beynon: Steel Res., 1999, vol. 70, pp. 22–27.10.1002/srin.199905596 ↗
3. Y.H. Li and C.M. Sellars: Report No. 0023, IMMPETUS, The University of Sheffield, Sheffield, United Kingdom, 2000.
4. S. Das, E.J. Palmiere, and I.C. Howard: Proc. Int. Conf. on Computational Modelling of Materials, Minerals and Metals Processing, M. Cross, J.W. Evans, and C. Bailey, eds., TMS, San Diego, CA, 2001a, pp. 613–22.
5. S. Das, I.C. Howard, and E.J. Palmiere: J. Mech. Phys. Solids, accepted for publication, 2004.
6. S. Das, E.J. Palmiere, and I.C. Howard: Mater. Sci. Technol., 2001b, vol. 17, pp. 864–73.10.1179/026708301101510654 ↗
7. G.T. van Rooyen and W.A. Backofen: J. Iron Steel Inst., 1957, vol. 186, pp. 235–44.
8. L.S. Lim and J.G. Lenard: J. Eng. Mater. Technol., 1984, vol. 106, pp. 139–46.10.1115/1.3225688 ↗
9. P.S. Theocaris, C.A. Stassinakis, and A.G. Mamalis: Int. J. Mech. Sci., 1983, vol. 25, pp. 833–44.10.1016/0020-7403(83)90065-6 ↗
10. Y.H. Li, J.H. Beynon, and C.M. Sellars: Proc. 6th ICTP, Advanced Technology of Plasticity—III, Nuremberg, Germany, 1999, pp. 2023–28.
11. Y. Yu and J.G. Lenard: J. Mater. Proc. Technol., 2002, vol. 121, pp. 60–68.10.1016/S0924-0136(01)01176-1 ↗
12. N.J. Silk and Y.H. Li: Proc. 3rd Int. Conf. on Modelling of Metal Rolling Processes, J.H. Beynon, M.T. Clark, P. Ingham, P. Kern, and K. Waterson, eds., Institute of Materials, London, 1999, pp. 400–09.
13. R. Colás: Proc. 3rd Int. Conf. on Modelling of Metal Rolling Processes, J.H. Beynon, M.T. Clark, P. Ingham, P. Kern, and K. Waterson, eds., Institute of Materials, London, 1999, pp. 380–89.
14. D.C. Martin, P. Mantyla, and P.D. Hodgson: Proc. 3rd Int. Conf. on Modelling of Metal Rolling Processes, J.H. Beynon, M.T. Clark, P. Ingham, P. Kern, and K. Waterson, eds., Institute of Materials, London, 1999, pp. 150–59.
15. T. Sakai, Y. Saito, K. Hirano, and K. Kato: Trans. ISIJ, 1988, vol. 28, pp. 1028–35.10.2355/isijinternational1966.28.1028 ↗
16. K. Datta: Ph.D. Dissertation, The University of Sheffield, Sheffield, United Kingdom, 1996.
17. F. Hollander: Proc. Conf. on Mathematical Models in Metallurgical Process Development Iron and Steel Institute, 1970, pp. 46–74.
18. R.A. Harding: Ph.D. Dissertation, The University of Sheffield, Sheffield, United Kingdom, 1976.
19. C. Devadas and I.V. Samarasekera: Ironmaking and Steelmaking, 1986, vol. 13, pp. 311–21.
20. M. Pietrzyk and J.G. Lenard: J. Mater. Shap. Technol., 1989, vol. 7, pp. 117–26.10.1007/BF02833778 ↗
21. W.C. Chen, I.V. Samarasekera, A. Kumar, and E.B. Hawbolt: Ironmaking and Steelmaking, 1993, vol. 20, pp. 113–25.
22. A. Salvador: The University of Sheffield, Sheffield, United Kingdom, unpublished research, 2002.
23. S. Das: Ph.D. Dissertation, The University of Sheffield, Sheffield, United Kingdom, 2002.