journal article·2014-09

The Effect of Alkali Concentration on the Structural and Magnetic Properties of Mn-Ferrite Nanoparticles Prepared via the Coprecipitation Method

Somayeh Pourbafarani

Publisher page

Abstract

MnFe2O4 nanoparticles were synthesized using the coprecipitation method under two different NaOH concentration settings as reaction agents at 355 K (82 °C). Structural and morphological properties of the nanoparticles were examined using X-ray diffraction and a scanning electron microscope. The decrease of NaOH concentration led to the increase of particle size. This result contradicts two recently published reports. Also, the decrease of NaOH concentration led to more crystallinity and a narrower particle size distribution. The results were evaluated from a chemical point of view and were based on the supersaturation level, which was influenced by alkali concentration. It was concluded that the higher NaOH concentration led to a more rapid nucleation and more random cation distribution. The magnetic properties of the nanoparticles examined by permeameter and faraday-balance equipment were consistent with the structural and morphological properties of the particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Iron oxide chemistry and applications · Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A. Goldman: Modern Ferrite Technology, 2nd ed., Springer-Verlag, New York, NY, 2006, pp. 217–394.
2. I. Sharifi, H. Shokrollahi, and S. Amiri: J. Magn. Magn. Mater., 2012, vol. 324 (6), pp. 903–15.10.1016/j.jmmm.2011.10.017 ↗
3. M.A. Dar, V. Verma, S.P. Gariola, W.A. Siddiqui, R.K. Singh, and R.K. Kotnala: J. Appl. Surf. Sci., 2012, vol. 258 (14), pp. 5342–47.10.1016/j.apsusc.2012.01.158 ↗
4. C.P. Bergmann and M.J.D. Andrade: Nanostructured Materials for Engineering Applications, Springer, Berlin, 2011, pp. 23–40.10.1007/978-3-642-19131-2 ↗
5. Z. Lou, M. He, R. Wang, W. Qin, D. Zhao, and C. Chen: J. Inorg. Chem., 2014, vol. 53 (4), pp. 2053–57.10.1021/ic402558t ↗
6. M.A. Ahmed, N. Okasha, and S. El-Dek: Nanotechnology, 2008, vol. 19, art. id 065603 (6pp).10.1088/0957-4484/19/6/065603 ↗
7. S. Bastien and N. Braidy: J. Appl. Phys., 2013, vol. 114, p. 21430410.1063/1.4837577 ↗
8. W. Niu, L. Zhang, and G. Xu: J. Nanoscale, 2013, vol. 5, pp. 3172–81.10.1039/c3nr00219e ↗
9. Y. Yin and D. Talapin: J. Chem. Soc. Rev., 2013, vol. 42, pp. 2484–87.10.1039/c3cs90011h ↗
10. W. Niu and G. Xu: J. Nano Today, 2011, vol. 6 (3), pp. 265–85.10.1016/j.nantod.2011.04.006 ↗
11. P.K. Baviskar, P.R. Nikam, S.S. Gagote, A. Ennaoui, and B.R. Sankapat: J. Alloys Compd., 2013, vol. 551, pp. 233–42.10.1016/j.jallcom.2012.10.052 ↗
12. T. Takada and M. Kiyama: Proc. Int. Conf., July 1970, pp. 69–72.
13. S. Pratapa, L. Susanti, Y.A.S. Insany, Z. Alfiati, B. Hartono, Mashuri, A. Taufiq, A. Fuad, Triwikantoro, M.A. Baqiya, S. Purwaningsih, E. Yahya, and Darminto: AIP Conf. Proc., vol. 1284, 2010, pp. 125–28.
14. H. Wang, X. Xu, J. Zhang, and C. Li: J. Mater. Sci. Technol., 2010, vol. 26, pp. 1037–40.10.1016/S1005-0302(10)60171-5 ↗
15. A. Yang, C.N. Chinnasamy, J.M. Greneche, Y. Chen, S.D. Yoon, Z. Chen, K. Hsu, Z. Cai, K. Ziemer, C. Vittoria, and V.G. Harris: Nanotechnology, 2009, vol. 20, art. id 185704 (9pp).10.1088/0957-4484/20/18/185704 ↗
16. W. Ramadan, M. Kareem, B. Hannoyer, and S. Saha: Adv. Mater. Res., 2011, vol. 324, pp. 129–32.10.4028/www.scientific.net/AMR.324.129 ↗
17. J.P. Chen, C.M. Sorensen, K.J. Klabunde, G.C. Hadjipanayis, E. Devlin, and A. Kostikas: Phys. Rev. B, 1996, vol. 54, pp. 9288–96.10.1103/PhysRevB.54.9288 ↗
18. K. Buschow: Concise Encyclopedia of Magnetic and Superconducting Materials, Advances in Materials Sciences and Engineering, 2nd ed., Elsevier, Amsterdam, 2005, pp. 210–15.
19. R. Buckley and P. Benito: Solid State Chemistry Research Trends, Nova Science, New York, NY, 2007, p. 205-06.
20. Z.X. Tang, C.M. Sorensen, K.J. Klabunde, and G.C. Hadjipanayis: Phys. Rev. Lett., 1991, vol. 67, pp. 3602–05.10.1103/PhysRevLett.67.3602 ↗
21. G.U. Kulkarni, K.R. Kannan, T. Arunarkavalli, and C.N.R. Rao: Phys. Rev. B, 1994, vol. 49, pp. 724–27.10.1103/PhysRevB.49.724 ↗
22. Z.X. Tang, C.M. Sorensen, K.J. Klabunde, and G.C. Hadjipanayis: J. Coll. Interface Sci., 1991, vol. 146, pp. 38–52.10.1016/0021-9797(91)90004-R ↗
23. V.A.M. Brabers: Phys. Rev. Lett., 1992, vol. 68, p. 3113.10.1103/PhysRevLett.68.3113 ↗
24. Z.X. Tang, J.P. Chen, C.M. Sorensen, K.J. Klabunde, and G.C. Hadjipanayis: Phys. Rev. Lett., 1992, vol. 68, p. 3114.10.1103/PhysRevLett.68.3114 ↗
25. E.P. Wohlfarth: Ferromagnetic Materials; A Handbook on the Properties of Magnetically Ordered Substances, North-Holland Physics, Amsterdam, 1982, pp. 191–211.
26. P.J. Van der Zaag, A. Noordermeer, M.T. Johnson, and P.F. Bongers: Phys. Rev. Lett., 1992, vol. 68, p. 3112.10.1103/PhysRevLett.68.3112 ↗
27. M. Mouroi, R. Street, P.G. McCormick, and J. Amighian: Phys. Rev. B, 2001, vol. 63, art. id 184414 (7pp).
28. J. Wang, J. Sun, Q. Sun, and Q. Chen: Mater. Res. Bull., 2003, vol. 38, pp. 1113–18.10.1016/S0025-5408(03)00129-6 ↗
29. R.Y. Hong, T.T. Pan, and H.Z. Li: J. Magn. Magn. Mater., 2006, vol. 303, pp. 60–68.10.1016/j.jmmm.2005.10.230 ↗