journal article·2010-11

Infrared Brazing Fe3Al Using Ag-Based Filler Metals

Ren-kae Shiue, Yao Li, Shyi-Kaan Wu, Ling-Mei Wu

Publisher page

Abstract

The microstructural evolution and bonding shear strength of infrared brazed Fe3Al using Ag and BAg-8 (72Ag-28Cu in wt pct) braze alloys have been studied. The Ag-rich phase alloyed with Al dominates the entire Ag brazed joints, and the shear strength is independent of the brazing time. The BAg-8 brazed joint contains Ag-Cu eutectic for all brazing conditions, and its shear strength increases slightly with increasing brazing time. The highest shear strength of 181 MPa is acquired from the joint infrared brazed at 1073 K (800 °C) for 600 seconds. A thin layer of Fe3Al is identified at the interface between the brazed zone and the substrate for both braze alloys. An Al depletion zone in the Fe3Al substrate next to the interfacial Fe3Al is identified as the α-Fe phase. The dissolution of Al from the Fe3Al substrate into the molten braze causes the formation of α-Fe in the Fe3Al substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. C.T. Liu, E.P. George, P.J. Maziasz, and J.H. Schneibel: Mater. Sci. Eng. A, 1998, vol. A258, pp. 84-98.10.1016/S0921-5093(98)00921-6 ↗
2. S.C. Deevi, V.K. Sikka, and C.T. Liu: Prog. Mater. Sci., 1997, vol. 42, pp. 177-92.10.1016/S0079-6425(97)00014-5 ↗
3. B.V. Reddy and S.C. Deevi: Intermetallics, 2000, vol. 8, pp. 1369-76.10.1016/S0966-9795(00)00084-4 ↗
4. C.G. McKamey and P.J. Maziasz: Intermetallics, 1998, vol. 6, pp. 303-14.10.1016/S0966-9795(97)00104-0 ↗
5. J. Kopecek, P. Kratochvíl, D. Rafaja, and D. Plischke: Intermetallics, 1999, vol. 7, pp. 1367-72.10.1016/S0966-9795(99)00057-6 ↗
6. C.G. McKamey, J.H. DeVan, P.F. Tortorelli, and V.K. Sikka: J. Mater. Res., 1991, vol. 6, pp. 1779-1805.10.1557/JMR.1991.1779 ↗
7. A.A. Fasching, G.R. Edwards, and S.A. David: Sci. Technol. Weld. Join., 1997, vol. 2, pp. 167-73.10.1179/stw.1997.2.4.167 ↗
8. A.A. Fasching, D.I. Ash, G.R. Edwards, and S.A. David: Scripta Metall., 1995, vol. 32, pp. 389-94.10.1016/S0956-716X(99)80070-3 ↗
9. Y.L. Lee, R.K. Shiue, and S.K. Wu: Intermetallics, 2003, vol. 11, pp. 187-95.10.1016/S0966-9795(02)00252-2 ↗
10. M. Schwartz: Brazing: for the Engineering Technologist, Chapman & Hall, New York, NY, 1995, pp. 1-7.
11. G. Humpston and D.M. Jacobson: Principles of Soldering and Brazing, ASM INTERNATIONAL, Materials Park, OH, 1993, pp. 3-4.
12. R.K. Shiue, S.K. Wu, and S.Y. Chen: Acta Mater., 2003, vol. 51, pp. 1991-2004.10.1016/S1359-6454(02)00606-7 ↗
13. R.K. Shiue, S.K. Wu, and C.H. Chan: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3177-86.10.1007/s11661-004-0062-3 ↗
14. R.K. Shiue, S.K. Wu, and Y.L. Lee: Intermetallics, 2005, vol. 13, pp. 818-26.10.1016/j.intermet.2005.01.005 ↗
15. M.L. Santella and A.B. Patterson: Mater. Sci. Eng. A, 1998, vol. A258, pp. 270-75.10.1016/S0921-5093(98)00944-7 ↗
16. M. Brochu, M. Pugh, and R.A.L. Drew: Intermetallics, 2004, vol. 12, pp. 289-94.10.1016/j.intermet.2003.10.007 ↗
17. T.B. Massalski: Binary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 8-9.
18. W.F. Smith: Structure and Properties of Engineering Alloys, 2nd ed., McGraw-Hill Inc., New York, NY, 1993, pp. 263-71.