journal article·2014-12

Modification of Grange–Kiefer Approach for Determination of Hardenability in Eutectoid Steel

Neethi Sushanthi, Joydeep Maity

Publisher page

Abstract

In this research work, an independent mathematical modeling approach has been adopted for determination of the hardenability of steels. In this model, at first, cooling curves were generated by solving transient heat transfer equation through discretization with pure explicit finite difference scheme coupled with MATLAB-based programming considering variable thermo-physical properties of 1080 steel. Thereafter, a new fundamental approach is proposed for obtaining CCT noses as a function of volume fraction transformed through modification of Grange–Kiefer approach. The cooling curves were solved against 50 pct transformation nose of CCT diagram in order to predict hardening behavior of 1080 steel in terms of hardenability parameters (Grossmann critical diameter, D C; and ideal critical diameter, D I) and the variation of the unhardened core diameter (D u) to diameter of steel bar (D) ratio with diameter of the steel bar (D). The experiments were also performed to ascertain actual D C value of 1080 steel for still water quenching. The D C value obtained by the developed model was found to match the experimental D C value with only 3 pct deviation. Therefore, the model developed in the present work can be used for direct determination of D I, D C and D u without resorting to any rigorous experimentation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2004, vol. 378, pp. 34-39.10.1016/j.msea.2003.10.328 ↗
2. M.A. Grossmann, Elements of Hardenability, ASM, Cleveland, OH, 1952, pp. 140-141.
3. M.A. Grossmann, M. Asimow, and S.F. Urban, Hardenability of Alloy Steels, ASM, Cleveland, OH, 1939, p. 12.
4. W.E. Jominy, Hardenability of Alloy Steels, ASM, Cleveland, OH, 1939, p. 66.
5. W.E. Jominy: Met. Prog., 1941, vol. 40, pp. 911-914.
6. Anon: Calculation of the Standard End-quench Hardenability Curve from Chemical Composition and Grain Size, AISI, 1946, pp. 1–25.
7. S. Kanazawa: Tetsu-to-Hagane, 1981, vol. 67, pp. 295-302.10.2355/tetsutohagane1955.67.2_295 ↗
8. M. A. Grossmann and E. C. Bain: Principles of Heat Treatment, 5th ed., ASM, Metals Park, OH,, 1964, pp. 75–127.
9. D.V. Doane: J. Heat Treating, 1979, vol. 1, pp. 5-30.10.1007/BF02833206 ↗
10. C.A. Siebert, D.V. Doane and D.H. Breen, The Hardenability of Steels, ASM, Metals Park, Ohio, 1977, pp. 20-29.
11. M. Umemoto, N. Nishioka and I. Tamura: J. Heat Treating, 1981, vol. 2, pp. 130-138.10.1007/BF02833229 ↗
12. M. V. Li, D. V. Niebuhr, L.L. Meekisho and D.G. Atteridge: Metall. Mat. Trans. B, 1998, vol. 29B, pp. 661-672.10.1007/s11663-998-0101-3 ↗
13. M. Umemoto, N. Komatsubara and I. Tamura: J. Heat Treating, 1980, vol. 1, pp. 57-64.10.1007/BF02833039 ↗
14. M.V. Li, D. Niebuhr, D.G. Atteridge, and L. Meekisho: Phase Transformations during the Thermal/Mechanical Processing of Steel, E.B. Hawbolt and S. Yue, CIM, Montreal, 1995, p 485–501.
15. M. Li: Ph.D. Thesis, Oregon Graduate Institute of Science and Technology, Portland, OR, 1996.
16. J.S. Kirkaldy and D. Venugopalan: in Phase Transformations in Ferrous Alloys, D.A.R. Marder and J.I. Goldstein eds. AIME, New York, NY, 1983, pp. 128–48.
17. J.L. Lee and H.K.D.H. Bhadeshia: China Steel Technical Report No. 7, China Steel Corporation, Hsiao Kang, Kaohsiung, Taiwan, 1993, pp. 16–25.
18. H.Cheng, X. Huang, J. Fan and H. Wang: Met. Mater., 1999, vol. 5, pp. 445-450.10.1007/BF03026157 ↗
19. S. Dong-li, G.U. Jian-feng, Z.Wei-min, L. Yang and P. Jian-sheng: Trans. Mater. Heat Treat., 2004, vol. 25, pp. 740-745.
20. S. Serajzadeh: J. Mater. Process. Technol., 2004, vol. 146, pp. 311-317.10.1016/j.jmatprotec.2003.11.010 ↗
21. C. Simsir, C. Hakan Gur (2008) Turkish J. Eng. Env. Sci.32:85-100.
22. M. Jung, M. Kang and Y.K. Lee: Acta Mater., 2012, vol. 60, pp. 525-536.10.1016/j.actamat.2011.10.007 ↗
23. J. Maity, A. Mandal, A.K. Behera, A.K. Ghosh (2004) IE(I) J. sMM 85:27-32.
24. R A Grange and J M Kiefer: Trans. ASM, 1941, vol. 29, pp. 85-115.
25. Anon: Atlas of Isothermal and Cooling Transformation Diagram, ASM, 1977, pp. 5–37.
26. E I Eazantsev, Industrial Furnaces, MIR Publishers, Moscow, 1977, pp. 62-109.
27. C E Bates: J. Heat Treating, 1988, vol. 6, pp. 27-45.10.1007/BF02833162 ↗
28. J.W. Cahn: Acta Met., 1956, vol. 4, pp. 449-459.10.1016/0001-6160(56)90041-4 ↗
29. E. Scheil: Arch. Eisenhuttenwes., 1935, vol. 12, pp. 565-567.
30. W.A. Johnson and R. F. Mehl: Trans. AIME, 1939, vol. 135, pp. 416-458.
31. M. Ohring, Engineering Materials Science, First Edition, Academic Press, New York, 1995, p. 441.
32. J.A. Jones, A.B. Perlman, and O. Orringer: Iron & Steel Society Technical Paper, 39th Mechanical Working and Steel Processing Conference Proceedings, Warrendale, PA, 1998, XXXV, pp. 1029–36.
33. V.K. Sinha, R.S. Prasad, A. Mandal and J. Maity: J. Mater. Eng. Perform., 2007, vol. 16, pp. 461–469.10.1007/s11665-007-9041-3 ↗
34. X. Xie, G.E. Totten and M.A.H. Howes (Eds.), Steel Heat Treatment Hand Book, Marcel Dekker, New York, 1997, p. 995.
35. P. A. Beck, J. C. Kremer, L. J. Demer and M. L. Holzworth: Trans. AIME, 1948, vol. 175, pp. 372-394.
36. J. Maity and D.K. Mondal: J. Iron. Steel. Res. Int., 2010, vol. 17, pp. 38-43.10.1016/S1006-706X(10)60154-9 ↗
37. T.V. Rajan, C.P. Sharma, and A. Sharma: Heat Treatment: Principles and Techniques, 2nd ed., PHI Learning Private Limited, New Delhi, 2011, p 110.
38. A.S. Wadhwa and H.S. Dhaliwal, A Text Book of Engineering Materials and Metallurgy, 1st ed., University Science Press, New Delhi, 2008, p 419.