journal article·2011-12Open access

In-Situ Fracture Observation and Fracture Toughness Analysis of Ni-Mn-Ga-Fe Ferromagnetic Shape Memory Alloys

Kwangjun Euh, Jung-Moo Lee, Duk-Hyun Nam, Sunghak Lee

Abstract

The fracture property improvement of Ni-Mn-Ga-Fe ferromagnetic shape memory alloys containing ductile γ particles was explained by direct observation of microfracture processes using an in-situ loading stage installed inside a scanning electron microscope (SEM) chamber. The Ni-Mn-Ga-Fe alloys contained a considerable amount of γ particles in β grains after the homogenization treatment at 1073 K to 1373 K (800 °C to 1100 °C). With increasing homogenization temperature, γ particles were coarsened and distributed homogeneously along β grain boundaries as well as inside β grains. According to the in-situ microfracture observation, γ particles effectively acted as blocking sites of crack propagation and provided the stable crack growth, which could be confirmed by the R-curve analysis. The increase in fracture resistance with increasing crack length improved overall fracture properties of the Ni-Mn-Ga-Fe alloys. This improvement could be explained by mechanisms of blocking of crack propagation and crack blunting and bridging.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. K. Ullakko, J.K. Huang, C. Kantner, R.C. O’Handley, and V.V. Kokorin: Appl. Phys. Lett., 1996, vol. 69, pp. 1966–68.10.1063/1.117637 ↗
2. R.C. O’Handley: J. Appl. Phys., 1998, vol. 83, pp. 3263–70.10.1063/1.367094 ↗
3. S.J. Murray, M. Marioni, S.M. Allen, R.C. O’Handley, and T.A. Lograsso: Appl. Phys. Lett., 2000, vol. 77, pp. 886–88.10.1063/1.1306635 ↗
4. T. Kakeshita, T. Takeuchi, T. Fukuda, T. Saburi, R. Oshima, S. Muto, and K. Kishio: Mater. Trans. JIM, 2000, vol. 41, pp. 882–87.10.2320/matertrans1989.41.882 ↗
5. A. Sozinov, A.A. Likhachev, N. Lanska, and K. Ullakko: Appl. Phys. Lett., 2002, vol. 80, pp. 1746–48.10.1063/1.1458075 ↗
6. K. Oikawa, L. Wulff, T. Iijima, F. Gejima, T. Ohmori, A. Fujita, and K. Fukamichi: Appl. Phys. Lett., 2001, vol. 79, pp. 3290–92.10.1063/1.1418259 ↗
7. L. Manosa, A. Planes, M. Acet, E. Duman, and E.F. Wassermann: J. Appl. Phys., 2003, vol. 93, pp. 8498–8500.10.1063/1.1555977 ↗
8. Y. Sutou, Y. Imano, N. Koeda, T. Omori, K. Ishida, and K. Oikawa: Appl. Phys. Lett., 2004, vol. 85, pp. 4358–60.10.1063/1.1808879 ↗
9. S.N. Kaul, B.A. D’Santhoshini, A.C. Abhyankar, and P. Henry: Appl. Phys. Lett., 2006, vol. 89, pp. 093119-1–093119-3.10.1063/1.2337271 ↗
10. S. Chatrerjee, M. Thakur, S. Giri, S. Majumdar, A.K. Deb, and S.K. De: J. Alloys Compd., 2008, vol. 456, pp. 96–100.10.1016/j.jallcom.2007.02.008 ↗
11. Y. Liang, Y. Sutou, T. Wada, C.C. Lee, M. Taya, and T. Mori: Scripta Mater., 2003, vol. 48, pp. 1415–19.10.1016/S1359-6462(03)00110-6 ↗
12. K. Oikawa, T. Ota, T. Omori, H. Morito, A. Fujita, R. Kainuma, K. Fukamichi, and K. Ishida: Appl. Phys. Lett., 2002, vol. 81, pp. 5201–03.10.1063/1.1532105 ↗
13. J. Font, J. Muntasell, R. Santamarta, F. Masdeu, and J. Pons: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 919–22.10.1016/j.msea.2006.02.106 ↗
14. R. Santamarta, J. Font, J. Muntasell, and F. Masdeu: Scripta Mater., 2006, vol. 54, pp. 1105–09.10.1016/j.scriptamat.2005.11.062 ↗
15. J.-M. Lee, Y.-M. Oh, K. Euh, and S.B. Kang: Met. Mater. Int., 2009, vol. 15, pp. 459–63.10.1007/s12540-009-0459-z ↗
16. H.B. Wang, F. Chen, Z.Y. Gao, W. Cai, and L.C. Zhao: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 990–93.10.1016/j.msea.2006.01.101 ↗
17. H.J. Yu, X.T. Zu, H. Fu, X.Y. Zhang, and Z.G. Wang: J. Alloys Compd. , 2009, vol. 470, pp. 237–40.10.1016/j.jallcom.2008.03.063 ↗
18. N.-R. Park, M.-K. Choe, J.-S. Park, W. Kim, and I.-J. Shon: Met. Mater. Int., 2009, vol. 15, pp. 765–69.10.1007/s12540-009-0765-x ↗
19. R. Kainuma, K. Ishida, and T. Nishizawa: Metall. Trans. A, 1992, vol. 23A, pp. 1147–53.10.1007/BF02665046 ↗
20. N. Ono, A. Tsukahara, R. Kainuma, and K. Ishida: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 420–24.10.1016/S0921-5093(99)00310-X ↗
21. A.A. Cherechukin, I.E. Dikshtein, D.I. Ermakov, A.V. Glebov, V.V. Koledov, D.A. Kosolapov, V.G. Shavrov, A.A. Tulaikova, E.P. Krasnoperov, and T. Takagi: Phys. Lett. A, 2001, vol. 291, pp. 175–83.10.1016/S0375-9601(01)00688-0 ↗
22. S.-M. Chae, J.-S. Park, W. Kim, S.-T. Oh, J.-K. Yoon, and I.-J. Shon: Met. Mater. Int., 2009, vol. 15, pp. 931–36.10.1007/s12540-009-0931-9 ↗
23. Y.Q. Ma, L.H. Xu, Y. Li, C.B. Jiang, H.B. Xu, and Y.K. Lee: Z. Metallkd., 2005, vol. 96, pp. 843–47.10.3139/146.101110 ↗
24. Y. Tanaka, K. Oikawa, Y. Sutou, T. Omori, R. Kainuma, and K. Ishida: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 1054–60.10.1016/j.msea.2006.05.021 ↗
25. R.K. Singh, M. Manivel Raja, R.P. Mathur, and M. Shamsuddin: J. Alloys Compd., 2010, vol. 506, pp. 73–76.10.1016/j.jallcom.2010.06.163 ↗
26. K. Ishida, R. Kainuma, N. Ueno, and T. Nishizawa: Metall. Trans. A, 1991, vol. 22A, pp. 441–46.10.1007/BF02656811 ↗
27. Y. Li, Y. Xin, C.B. Jiang, and H.B. Xu: Scripta Mater., 2004, vol. 51, pp. 849–52.10.1016/j.scriptamat.2004.07.010 ↗
28. K. Euh, J.-M. Lee, D.-H. Nam, and S. Lee: J. Kor. Inst. Met. Mater., 2009, vol. 47, pp. 787–96.
29. A.M. Gokhale and E.E. Underwood: Metall. Trans. A , 1990, vol. 21A, pp. 1193–99.10.1007/BF02656538 ↗
30. N. Ma, T. Park, D. Kim, C. Kim, and K. Chung: Met. Mater. Int., 2010, vol. 16, pp. 427–39.10.1007/s12540-010-0613-7 ↗
31. J.G. Lee, D.-G. Lee, S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3753–61.10.1007/s11661-004-0281-7 ↗
32. S.R. Nutt and L.M. Duva: Scripta Metall., 1986, vol. 20, pp. 1055–58.10.1016/0036-9748(86)90435-7 ↗
33. D.K. Shetty, I.G. Wright, P.N. Mincer, and A.H. Clauer: J. Mater. Sci., 1985, vol. 20, pp. 1873–82.10.1007/BF00555296 ↗
34. A.G. Evans and T.R. Wilshaw: Acta Metall., 1976, vol. 24, pp. 939–56.10.1016/0001-6160(76)90042-0 ↗
35. S. Lee, K.-S. Sohn, C.G. Lee, and B.I. Jung: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 123–34.10.1007/s11661-997-0088-4 ↗
36. R.O. Ritchie and R.M. Horn: Metall. Trans. A, 1978, vol. 9A, pp. 331–41.10.1007/BF02646382 ↗
37. Y.-H. Kim, D. Kwon, and S. Lee: Acta Metall., 1994, vol. 42, pp. 1887–91.10.1016/0956-7151(94)90013-2 ↗
38. ASTM Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, ASTM E399-83, ASTM. Philadelphia, PA, 1983, pp. 2213–23.
39. K.T. Faber and A.G. Evans: Acta Metall., 1983, vol. 31, pp. 577–84.10.1016/0001-6160(83)90047-0 ↗
40. T.H. Tuan: J. Euro. Ceram. Soc., 2000, vol. 20, pp. 895–99.10.1016/S0955-2219(99)00213-7 ↗