Hydrogen-assisted deformation and fracture behaviors of Al 8090
Source abstract
Abstract
In the present study, the hydrogen embrittlement (HE) and the hydrogen-assisted fracture (HAF) behaviors of electrochemically hydrogen-charged Al 8090 with different specimen orientations and aging practices were examined using smooth bar and single-edge notch (SEN) specimens. It was found that the cathodic hydrogen charging substantially reduced the tensile ductility and the resistance to fracture of Al 8090. The susceptibility to HE and HAF of Al 8090 was strongly dependent on specimen orientations and aging practices. Hydrogen attack was the most significant along the grain boundaries, and, consequently, T-S oriented SEN and T-oriented smooth-bar specimens showed the highest susceptibility among the orientations studied. The susceptibility to HE and HAF decreased from underaging (UA) temper to overaging (OA) temper. It is speculated that the formation and development of a precipitate-free zone (PFZ) along the grain boundaries, rather than the change in slip planarity with prolonged aging is responsible for the reduced susceptibility to HE and HAF. Further studies are, however, required to confirm this notion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. W.K. Jang, S.S. Kim, and K.S. Shin: Scripta mater., 1999, vol. 40, pp. 503–08.10.1016/S1359-6462(98)00472-2 ↗
2. N.J.H. Holroyd and D. Hardie: Corr. Sci., 1981, vol. 21, pp. 129–44.10.1016/0010-938X(81)90097-4 ↗
3. M. Taheri, J. Albrecht, I.M. Bernstein, and A.W. Thompson: Scripta Metall., 1979, vol. 13, pp. 871–75.10.1016/0036-9748(79)90177-7 ↗
4. S.S. Kim, E.W. Lee, and K.S. Shin: Scripta Metall., 1988, vol. 22, pp. 1831–34.10.1016/S0036-9748(88)80221-7 ↗
5. R.P. Gangloff and S.S. Kim: NASA Contractor Report No. 191538, NAG-745, NASA, Washington, DC, 1993.
6. D. Hardie, N.J.H. Holroyd, and R.N. Parkins: Met. Sci., 1979, Nov., pp. 603–10.10.1179/msc.1979.13.11.603 ↗
7. R.C. Dorward and K.R. Hasse: Corrosion, 1987, vol. 43, pp. 408–13.10.5006/1.3583877 ↗
8. K.V. Jata and E.A. Starke, Jr.: Metall. Trans. A, 1986, vol. 17A, pp. 1019–21.
9. Y.B. Xu, L. Wang, Y. Zhang, Z.G. Wang, and W.Z. Hu: Metall. Trans. A, 1991, vol. 22A, pp. 723–29.
10. D.A. Hardwick, M. Taheri, A.W. Thompson, and I.M. Bernstein: Metall. Trans. A, 1982, vol. 13A, pp. 235–39.10.1007/BF02643313 ↗
11. S.W. Smith and J.R. Scully: in Hydrogen Effects in Materials, A.W. Thompson and N.R. Moody eds., TMS, Warrendale, PA, 1996, pp. 131–41.
12. T.H. Sanders, Jr. and E.A. Starke, Jr.: Metall. Trans. A, 1976, vol. 7A, pp. 1407–17.10.1007/BF02658827 ↗
13. K.T.V. Rao, J.C. McNulty, and R.O. Ritchie: Metall. Mater. Trans., 1993, vol. 24A, pp. 2233–45.10.1007/BF02648598 ↗
14. J.B. Lumsden and A.T. Allen: Corr. Sci., 1988, vol. 44, pp. 527–32.10.5006/1.3583971 ↗
15. C. Thakur and R. Balasubramaniam: Acta Mater., 1997, vol. 45, pp. 1323–32.10.1016/S1359-6454(96)00287-X ↗
16. L. Chen, W. Chen, Z. Liu, Y. Sho, and Z. Hu: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 1355–61.10.1007/BF02668203 ↗
17. W.K. Jang, S.S. Kim, M.W. Park, and K.S. Shin: J. Kor. Inst. Met., 1998, vol. 36, pp. 2067–73.
18. K.J. Park: Ph.D. Dissertation, Pohang University of Science and Technology, Pohang, Korea, 1994.
19. O. Jensrud and N. Ryum: Mater. Sci. Eng., 1984, vol. 64, pp. 927–39.10.1016/0025-5416(84)90106-X ↗
20. E.J. Lavernia, T.S. Srivatsan, and F.A. Mohamed: J. Mater. Sci., 1990, vol. 25, pp. 1137–58.10.1007/BF00585420 ↗
21. P.J. Gregson and H.M. Flower: Acta Metall., 1988, vol. 33, pp. 527–37.10.1016/0001-6160(85)90095-1 ↗
22. T.H. Sanders, Jr. and E.A. Starke, Jr.: Acta Metall., 1982, vol. 30, pp. 927–39.10.1016/0001-6160(82)90199-7 ↗
23. L.M. Young: M.S. Thesis, University of Virginia, Charlottesville, VA, 1993.
24. J.W. Watson, Y.Z. Shen, and M. Meshii: Metall. Trans., 1988, vol. 19A, pp. 2299–2304.10.1007/BF02645053 ↗
25. S. Abis, E. Evangelista, P. Mengucci, and G. Riontino: Aluminum-Lithium Alloys, T.H. Sanders Jr. and E.A. Starke, Jr., eds., MCEP, Birmingham, United Kingdom, 1989, pp. 681–90.
26. J.H. Kulwicki and T.H. Sanders, Jr.: Aluminum-Lithium II, T.H. Sanders Jr. and E.A. Starke, Jr., eds., AIME, Warrendale, PA, 1983, pp. 31–51.
27. G.M. Bond, I.M. Robertson, and H.K. Bimbaum: Acta Metall., 1987, vol. 35, pp. 2289–96.10.1016/0001-6160(87)90076-9 ↗