journal article·2008-04

Fatigue Life and Short Crack Behavior in Ti-6Al-4V Alloy; Interactions of Foreign Object Damage, Stress, and Temperature

Behzad Majidi

Publisher page

Abstract

High-cycle fatigue (HCF) failures associated with foreign object damage (FOD) in turbine engines of military aircrafts have been of major concern for the aeronautic industry in recent years. The present work is focused on characterizing the effects of FOD on crack initiation and small crack growth of a Ti-6Al-4V alloy at ambient and also elevated temperatures. Results show that the preferred crack initiation site depends on applied stress and temperature as maximum fractions of cracks emanating from the simulated damage site, and naturally initiated cracks are observed at 25 °C under the maximum stress of 700 MPa and at 300 °C under the maximum stress of 300 MPa. The fatigue crack growth rate is influenced by increasing temperature, and the FCG rate at 300 °C is higher than that at room temperature under the same ΔK, whereas this effect for FOD-site initiated cracks is not so remarkable. This observation seems to be due to the effect of stress relaxation at 300 °C. Results also indicate that fatigue crack initiation life (Ni) and fatigue life (Nf) are expressed by three-parameter Weibull distribution function.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. R.D. Briges: Advances in the Science and Technology of Titanium Alloy Processing, TMS, Anaheim, 1996, pp. 413–20
2. P.S. Shankar and K.S. Ravichandran: Presented at the Symposium on Fatigue of Titanium Alloys, TMS Fall Meeting, Chicago, IL, 1998, pp. 135–47
3. G.R. Yoder, L.A. Cooley, and R.R. Boyer: Proceedings of TMS AIME Annual Symposia, ASTM-AIME, Denver, CO (at Marriott Hotel), 1987, pp. 209–27
4. M. Niinomi, T. Akahori, and K.-I. Fukunaga: Presented at the Symposium on Fatigue of Titanium Alloys, TMS Fall Meeting, Chicago, IL, 1998, pp. 307–14
5. N. Singh, Gouthama, and V. Singh: Int. J. Fatigue, 2007, vol. 29, pp. 843–5110.1016/j.ijfatigue.2006.09.006 ↗
6. C. Sarrazin-Baudoux, S. Lesterlin, J. Petit: ASTM STP, 1997, vol. 1297, pp. 117–39
7. Y. Dai, N. Marchand, M. Hongoh, J.I. Dickson: Titanium ‘92, vol. 2, TMS, Warrendale, PA, 1993, pp. 1803–10
8. K. Shiozawa, S. Nishino, Y.J. Aikawa: Soc. Mater. Sci., Jpn., 1995, vol. 44, pp. 1372–7710.2472/jsms.44.1372 ↗
9. K. Tokaji: Scripta Mater., 2006, vol. 54, pp. 2143–4810.1016/j.scriptamat.2006.02.043 ↗
10. “Report of the AdHoc Committee on Air Force Aircraft Jet Engine Manufacturing and Production Processes,” United States Air Force Scientific Advisory Board, SAF/AQQS, the Pentagon, Washington, DC, 1992
11. B.A. Cowles: Int. J. Fract., 1996, vol. 80, pp. 147–6310.1007/BF00012667 ↗
12. Erosion, AGARD Conf. Proc. 558, North Atlantic Treaty Organization, Advisory Group for Aerospace Research and Development, Propulsion and Energetics Panel, Neuilly-sur-Seine, France, 1994
13. T. Nicholas, J.R. Barber, R.S. Bertke: Expt. Mech., 1980, vol. 20, pp. 357–6410.1007/BF02321123 ↗
14. S.J. Hudak, K.S. Chan, R.C. McClung, G.G. Chell, Y.-D. Lee, and D.L. Davidson: Final Technical Report UDRI Subcontract No. RI 40098X, SwRI Project No. 18-8653, SwRI, San Antonio, TX, 1999
15. X. Chen, J.W. Hutchinson: J. Mech. Phys. Solids, 2002, vol. 50, pp. 2669–9010.1016/S0022-5096(02)00022-4 ↗
16. P. Duó, J. Liu, D. Dini, M. Golshan, A.M. Korsunsky: Mech. Mater., 2007, vol. 39, pp. 199–21110.1016/j.mechmat.2006.05.003 ↗
17. J.O. Peters, R.O. Ritchie: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 597–60110.1016/S0921-5093(01)00982-0 ↗
18. R.O. Ritchie, D.L. Davidson, B.L. Boyce, J.P. Campbell, and O. Roder: Fatigue Fract. Eng. Mater. Struct., 1999, vol. 22, pp. 621–3110.1046/j.1460-2695.1999.00194.x ↗
19. S.Y. Oakley, D. Nowell: Int. J. Fatigue, 2007, vol. 29, pp. 69–8010.1016/j.ijfatigue.2006.02.042 ↗
20. J.C. Newman, I.S. Raju: Eng. Fract. Mech., 1981, vol. 15, pp. 185–9210.1016/0013-7944(81)90116-8 ↗
21. T. Yuri, Y. Ono, T. Ogata: Cryogenics, 2006, vol. 46, pp. 30–3610.1016/j.cryogenics.2005.10.011 ↗
22. S. Li, B. Xiong, S. Hui, W. Ye, and Y. Yu: Mater. Characterization, in press
23. S. Albinali: Master’s Thesis, Air Force Institute of Technology, Wright-Patterson AFB, OH, 2005
24. J. Ding, R. Hall, J. Byrne: Int. J. Fatigue, 2005, vol. 27, pp. 1551–5810.1016/j.ijfatigue.2005.06.007 ↗
25. T. Saskati, T. Tanaka: J. Soc. Mater. Jpn., 1980, vol. 29, pp. 17–2310.2472/jsms.29.17 ↗