Optimization of Laser Keyhole Welding Strategies of Dissimilar Metals by FEM Simulation
Source abstract
Abstract
Laser keyhole welding of dissimilar metals has been simulated to study the effect of welding strategies (laser beam displacements and tilts) and combination of metals to be welded on final quality of the joints. Molten pool geometry and welding penetration have been studied but special attention has been paid to final joint material properties, such as microstructure/phases and hardness, and especially to the residual stress state because it greatly conditions the service life of laser-welded components. For a fixed strategy (laser beam perpendicular to the joint) austenitic to carbon steel laser welding leads to residual stresses at the joint area very similar to those obtained in austenitic to martensitic steel welding, but welding of steel to Inconel 718 results in steeper residual stress gradients and higher area at the joint with detrimental tensile stresses. Therefore, when the difference in thermo-mechanical properties of the metals to be welded is higher, the stress state generated is more detrimental for the service life of the component, and consequently more relevant is the optimization of welding strategy. In laser keyhole welding of austenitic to martensitic stainless steel and austenitic to carbon steel, the optimum welding strategy is displacing the laser beam 1 mm toward the austenitic steel. In the case of austenitic steel to Inconel welding, the optimum welding strategy consists in setting the heat source tilted 45 deg and moved 2 mm toward the austenitic steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. A.P. Mackwood and R.C. Crafer: Opt Laser Technol, 2005, vol. 37, pp. 99-115.10.1016/j.optlastec.2004.02.017 ↗
2. S. H. Baghjari and S.A.A. Akbari Mousavi: Mater Design, 2014, vol. 57, pp. 128–34.10.1016/j.matdes.2013.12.050 ↗
3. G. Sierra, P. Peyre, F. Deschaux-Beaume, D. Stuart and G. Fras: Mater Sci Eng A, 2007, vol. 447, pp. 197–208.10.1016/j.msea.2006.10.106 ↗
4. H.-Y. Han and Z. Sun: Int J Pres Ves Pip, 1994, vol. 60 [1], pp. 59-64.10.1016/0308-0161(94)90113-9 ↗
5. B. Panton, A. Pequegnat and Y.N. Zhou : Metall Mater Trans A, 2014, vol. 45A, pp. 3533-44.10.1007/s11661-014-2280-7 ↗
6. M.M.A. Khan, L. Romoli, M. Fiaschi, G. Dini and F. Sarri: J Mater Process Tech, 2012, vol. 212, pp. 856– 67.10.1016/j.jmatprotec.2011.11.011 ↗
7. M.M.A. Khan, L. Romoli and G. Dini: Opt Laser Technol, 2013, vol. 49, pp. 125 –36.10.1016/j.optlastec.2012.12.025 ↗
8. M.J. Torkamany, F. Malek Ghaini and R. Poursalehi: Mater Design, 2014, vol. 53, pp. 915–20.10.1016/j.matdes.2013.07.094 ↗
9. T.A. Mai and A.C. Spowage: Mater Sci Eng A, 2004, vol. 374, pp. 224–33.10.1016/j.msea.2004.02.025 ↗
10. L. Liu and H. Wang: Metall Mater Trans A, 2011, vol. 42 issue 4, pp.1044-50.10.1007/s11661-010-0521-y ↗
11. A. Ruggiero, L. Tricarico, A.G. Olabi and K.Y. Benyounis: Opt Laser Technol, 2011, vol. 43, pp. 82–90.10.1016/j.optlastec.2010.05.008 ↗
12. A. Kouadri-David, PSM Team: Mater Design, 2014, vol. 54, pp. 184–95.10.1016/j.matdes.2013.07.093 ↗
13. G. Phanikumar, S. Manjini, P. Dutta, J. Mazumder, and K. Chattopadhyay: Metal Mater Trans A, 2005, vol. 36, pp. 2137-47.10.1007/s11661-005-0334-6 ↗
14. D.C. Saha, D. Westerbaan, S.S. Nayak, E. Biro, A.P. Gerlich and Y. Zhou: Mater Sci Eng A, 2014, vol. 607, pp. 445–53.10.1016/j.msea.2014.04.034 ↗
15. Y. Quan, Z. Chen, X. Gong, Z. Yu: Mater Sci Eng A, 2008, vol. 496, pp. 45–51.10.1016/j.msea.2008.04.065 ↗
16. S. Chen, J. Huang, J. Xia, H. Zhang and X. Zhao: Metall Mater Trans A, 2013, vol. 44 [8], pp. 3690-6.10.1007/s11661-013-1693-z ↗
17. C.C. Chang, C.P. Chou, S.N. Hsu, G.Y. Hsiung and J.R. Chen: J Mater Sci Technol, 2010, vol. 26 [3], pp. 276-82.10.1016/S1005-0302(10)60046-1 ↗
18. S.A.A. Akbari Mousavi and A.R. Sufizadeh: Mater Design, 2009, vol. 30 [8], pp. 3150-57.10.1016/j.matdes.2008.11.026 ↗
19. P.S. Liu, W.A. Baeslack III, and J. Hurley: Weld J., 1994, Welding Research Supplement July, pp. 175–81.
20. Z. Li and G. Fontana: J Mater Process Tech, 1998, vol. 74 [1-3], pp. 174-82.10.1016/S0924-0136(97)00265-3 ↗
21. M. Cantello, L. Bonello, G. Fontana and Z. Li: CIRP Ann—Manuf Techn, 1997, vol. 46 [1], pp. 123-6.10.1016/S0007-8506(07)60789-6 ↗
22. L. Mujica, S. Weber, H. Pinto, C. Thomy and F. Vollertsen: Mater Sci Eng A, 2010, vol. 527, pp. 2071–78.10.1016/j.msea.2009.11.050 ↗
23. J.R. Berretta, W. de Rossi, M.D. Martins das Neves, I. Alves de Almeida and N. Dias Vieira Junior: Opt. Laser Eng., 2007, vol. 45, pp. 960–66.10.1016/j.optlaseng.2007.02.001 ↗
24. L. Li, C. Tan, Y. Chen, W. Guo and C. Mei: J Mater Process Tech, 2013, vol. 213, pp. 361–75.10.1016/j.jmatprotec.2012.10.009 ↗
25. J. Rahman Chukkan, M. Vasudevan, S. Muthukumaran, R. Ravi Kumar, N. Chandrasekhar: J Mater Process Tech, 2015, vol. 219, pp. 48–59.10.1016/j.jmatprotec.2014.12.008 ↗
26. K. Abderrazak, W. Kriaa, W.Ben Salem, H. Mhiri, G. Lepalec and M. Autric: Opt Laser Technol, 2009, vol. 41, pp. 470–80.10.1016/j.optlastec.2008.07.012 ↗
27. Y. Hu, X. He, G. Yu, Z. Ge, C. Zheng and W. Ning: Appl Surf Sci, 2012, vol. 258, pp. 5914–22.10.1016/j.apsusc.2012.02.143 ↗
28. B. Binda, E. Capello and B. Previtali: J Mater Process Tech, 2004, vol. 155–156, pp.1235–41.10.1016/j.jmatprotec.2004.04.145 ↗
29. W-I. Cho, S-J. Na, C. Thomy and F. Vollertsen: J Mater Process Tech, 2012, vol. 212, pp. 262–75.10.1016/j.jmatprotec.2011.09.011 ↗
30. L. Han and F.W. Liou: Int J Heat Mass Tran, 2004, vol. 47, pp. 4385–402.10.1016/j.ijheatmasstransfer.2004.04.036 ↗
31. X. Z. Jin and L. J. Li: Opt Laser Technol, 2003, vol. 35, pp. 5–12.10.1016/S0030-3992(02)00116-0 ↗
32. J.-H. Kuang, T.-P. Hung and C.-K. Chen:. Opt Laser Technol, 2012, vol. 44, pp. 1521-28.10.1016/j.optlastec.2011.12.006 ↗
33. N. Siva Shanmugam, G. Buvanashekaran, K. Sankaranarayanasamy and S. Ramesh Kumar: Mater Design, 2010, vol. 31, pp. 4528–42.10.1016/j.matdes.2010.03.057 ↗
34. N. Siva Shanmugam, G. Buvanashekaran and K. Sankaranarayanasamy: Mater Design, 2012, vol. 34, pp. 412–26.10.1016/j.matdes.2011.08.005 ↗
35. S. Pang, W. Chen and W. Wang: Metall Mater Trans A, 2014, vol. 45A, pp. 2808-18.10.1007/s11661-014-2231-3 ↗
36. M. Turňa, B. Taraba, P. Ambrož and M. Sahul: Phys Proc, 2011, vol. 12, pp. 638–45.10.1016/j.phpro.2011.03.080 ↗
37. R. Wang, Y. Lei and Y. Shi: Opt Laser Technol, 2011, vol. 43, pp. 870–3.10.1016/j.optlastec.2010.10.007 ↗
38. A. De, T. DebRoy: Sci Technol Weld Joining, 2011, vol. 16, no. 3, pp. 204-8.10.1179/136217111X12978476537783 ↗
39. S. Missori and C. Koerber: Weld. J., 1997, Welding Research Supplement March, pp. 125–34.
40. W.-C. Chung, J.-Y. Huang, L.-W. Tsay, C. Chen: Mater Trans, 2011, vol. 52, no. 1, pp. 12-9.10.2320/matertrans.M2010294 ↗
41. N. Arivazhagan, S. Singh, S. Prakash, G.M. Reddy: Mater Design, 2011, vol. 32, pp. 3036–50.10.1016/j.matdes.2011.01.037 ↗
42. Z. Sun, and J.C. Ion: J. Mater. Sci., 1995, vol 30, pp. 4205–14.10.1007/BF00361499 ↗
43. I. Hajiannia, M. Shamanian, M. Kasiri: Mater Design, 2013, vol. 50, pp. 566-73.10.1016/j.matdes.2013.03.029 ↗
44. E. M. Anawa, A. G. Olabi: Opt Laser Eng, 2008, vol. 46, pp. 571-7.10.1016/j.optlaseng.2008.04.014 ↗
45. X.-B. Liu, M. Pang, Z.-G. Zhang, W.-J. Ning, C.-Y. Zheng, G. Yu: Opt Laser Eng, 2007, vol. 45, pp. 929-34.10.1016/j.optlaseng.2007.03.004 ↗
46. J. Dowden: The Theory of Laser Materials Processing, Springer Series in Materials Science, Springer, Berlin, 2008.
47. K.D. Lee, K.I. Ho, K.Y. Park: Weld J, 2014, vol. 93, pp. 351-61.
48. T.W. Nelson, J.C. Lippold, and M.J. Mills: Weld. J., 1999, Welding Research Supplement October, pp. 329–37.
49. G. Çam, S. Erim, Ç. Yeni, and M. Koçak: Weld. J., 1999, Welding Research Supplement June, pp. 193–201.
50. H.K.D.H. Bhadeshia: in Handbook of Residual Stress and Deformation of Steel, G. Totten, M. Howes and T. Inoue, eds., ASM International, Materials Park, Ohio, 2002, pp 3–10.