journal article·2006-12

Strain and the quantitative characterization of anisotropic microstructures

Craig S. Hartley

Publisher page

Abstract

Microstructures exhibit both crystallographic and morphological anisotropy. The orientation distribution function (ODF) for P L(t), the number of intersections per unit length of boundaries with test lines parallel to a unit vector. t. describes morphological anisotropy, the spatial distribution of internal interfaces that separate grains or phases. Weak anisotropy refers to a microstructure such that P L(t) vs t is an ellipsoid. Coefficients of the direction cosines in the equation of the ellipsoid form a Cartesian tensor called the microstructural anisotropy tensor (MAT). This work develops a measure of internal total strain, the Eulerian finite grain strain tensor (EFGST), based on the MAT. The reference state for the EFGST is an isotropic network having the same surface area per unit volume, S V, as the deformed specimen. Analysis of the deformation of the network of ferrite-ferrite boundaries in a specimen of 1020 steel deformed in uniaxial tension illustrates that the EFGST measured at the centroid of the gage section changes congruently with a similar measure of bulk deformation, both having principal axes aligned with those of the bulk deformation. However, the values of strain are not identical due to nonuniform deformation in the gage section after necking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Metal Forming Simulation Techniques · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. D.P. Field and B.L. Adams: Acta Metall. Mater., 1992, vol. 46, pp. 1145–57.10.1016/0956-7151(92)90413-9 ↗
2. W.A. Rachinger: J. Inst. Met., 1952–53, vol.81, pp. 33–41.
3. G.H. Hensler and R.C. Gifkins: J. Inst. Met., 1963–64, vol. 92, p. 340.
4. J.E. Flinn and E.M. Philofsky: Trans. ASM, 1968, vol. 61, pp. 37–41.
5. E.M. Philofsky and J.E. Hilliard: Q. Appl. Math., 1969, vol. 27, pp. 79–86.10.1090/qam/99835 ↗
6. E. Űnal and C.S. Hartley: Acta Metall., 1983, vol. 31, pp. 525–28.10.1016/0001-6160(83)90041-X ↗
7. E. Űnal and C.S. Hartley: in Novel Techniques in Metal Deformation Testing, R. Wagoner, ed., AIME Conference Series, AIME, Warrendale, PA, 1983, pp. 265–74.
8. C.S. Hartley and M. Dehghani: Proc. 7th ICSMA, H. McQueen, J.J. Jonas, H.K. Akben, and J.P. Bailon, eds., Pergamon Press, New York, NY, 1987, vol. 2, pp. 959–64.
9. C.S. Hartley: Coll. Phys., 1990, Coll. CI. Suppl. AUN 1, Tome 51, pp. 173–77.
10. R. Diwan and C.S. Hartley: Proc 6th Int. Congr. on Stereology, Acta Stereol., 1987, vol. 2 (1), pp. 197–200.
11. K. Kanatani: Int. J. Eng. Sci., 1984, vol. 22, pp. 149–64.10.1016/0020-7225(84)90055-7 ↗
12. S.A. Saltykov: Stereometric Metallography, Metallurgizdat, Moscow, 1958.
13. R.T. DeHoff and F.N. Rhines: Quantitative Microscopy, McGraw-Hill, New York, NY, 1968.
14. E.E. Underwood: Quantitative Stereology, 1970, Addison-Wesley, Reading, MA.
15. J.E. Hilliard: Trans. Am. Inst. Min. Eng., 1962, vol. 224, pp. 1201–12.
16. T.P. Harrigan and R.W. Mann: J. Mater. Sci., 1984, vol. 19, pp. 761–67.10.1007/BF00540446 ↗
17. W.J. Whitehouse: J. Microsc., 1974, vol. 101, pp. 153–68.10.1111/j.1365-2818.1974.tb03878.x ↗
18. S.C. Cowin and M. Satake, eds.: Continuum Mechanical and Statistical Approaches to the Mechanics of Granular Materials, Gakujutsu Bunken Fukyu-Kai, Tokyo, 1978, p. 162.
19. C.H. Turner and S.C. Cowin: J. Mater. Sci., 1987, vol. 22, pp. 3178–84.10.1007/BF01161180 ↗
20. S.C. Cowin and A.J. Laborde: Mech. Mater., 1985, vol. 4, pp. 137–47.10.1016/0167-6636(85)90012-2 ↗
21. S.C. Cowin: J. Mater. Sci., 1991, vol. 26, pp. 5155–57.10.1007/BF01143206 ↗
22. A.T. Huber and L. Gibson: J. Mater. Sci., 1988, vol. 23, pp. 3031–40.10.1007/BF00547486 ↗
23. L.E. Malvern: Introduction to the Mechanics of a Continuous Medium, 1st ed, Prentice-Hall, Englewood Cliffs, NJ, 1969.
24. R.T. DeHoff, Trans. TMS-AIME, 1965, vol. 233, pp. 25–29.
25. S.-T. Horng: Master’s Thesis, University of Alabama at Birmingham, Birmingham, AL, 1989.
26. O. Fisher: in Survey of Applicable Mathematics, K. Rektorys, eds., MIT Press, Cambridge, MA, 1969, pp. 1285–381.
27. J.E. Hilliard: Stereology, Proc. 2nd Int. Congr. for Stereology, Springer-Verlag, Berlin, p. 219.
28. J.E. Spowart, H.M. Mullens, and B.T. Puchala: JOM, 2003, vol. 55, pp. 35–37.10.1007/s11837-003-0173-0 ↗