journal article·2022-12Open access

Effect of Compressive Creep and Hydrostatic Pressure on Diffusion in NiCr and NiSi Systems

Camille Salsi, Daniel Monceau, Clara Desgranges, Thomas Gheno

Abstract

Interdiffusion coefficients were measured in NiSi and NiCr systems from diffusion couples under hydrostatic pressures between 50 and 326 MPa, at 1200 °C. Uniaxial compression creep tests were also carried out on Ni–Cr diffusion couples at 885 °C, 940 °C and 1000 °C with stress values between 0 and 25 MPa, to observe the effect of applied stress on diffusion. A numerical inverse method was elaborated to determine interdiffusion coefficients that takes into account the plastic strain. The comparison of all the diffusion coefficients shows no significant effect of stress for the creep tests and a slight decrease of the interdiffusion coefficients for the hot isostatic pressing (HIP) tests in both systems when the compressive stress increases. This variation is less than twofold, thus the effect is negligible compared to the scatter observed for one diffusion coefficient from different sources of the literature.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. D.Y. Li and L.Q. Chen: Scripta Mater., 1997, vol. 37, pp. 1271–77.10.1016/S1359-6462(97)00276-5 ↗
2. L.A. Girifalco and H.H. Grimes: The Theory of Diffusion in Strained Systems, NASA, Washington, DC, 1959.
3. D.L. Beke: Defect Diffus. Forum DDF, 1996, vol. 129–130, pp. 9–30.10.4028/www.scientific.net/DDF.129-130.9 ↗
4. H. Mehrer: Defect Diffus. Forum, 2011, vol. 309–310, pp. 91–112.10.4028/www.scientific.net/DDF.309-310.91 ↗
5. R. Nakamura, K. Fujita, Y. Iijima, and M. Okada: Acta Mater., 2003, vol. 51, pp. 3861–70.10.1016/S1359-6454(03)00210-6 ↗
6. J.-W. Jang, J. Kwon, and B.-J. Lee: Scripta Mater., 2010, vol. 63, pp. 39–42.10.1016/j.scriptamat.2010.02.045 ↗
7. D. Connétable and P. Maugis: Acta Mater., 2020, vol. 200, pp. 869–82.10.1016/j.actamat.2020.09.053 ↗
8. J. Nguejio Nguimatsia: Thesis, Paris Sciences et Lettres, 2016.
9. T. Gheno, F. Jomard, C. Desgranges, and L. Martinelli: Materialia, 2018, vol. 3, pp. 145–52.10.1016/j.mtla.2018.08.004 ↗
10. S.K. Kailasam, J.C. Lacombe, and M.E. Glicksman: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2605–10.10.1007/s11661-999-0300-9 ↗
11. R. Bouchet and R. Mevrel: Acta Mater., 2002, vol. 50, pp. 4887–4900.10.1016/S1359-6454(02)00358-0 ↗
12. J. Philibert: Diffusion et transport de matière dans les solides, les éditions de physique, Les Ulis, 1985.
13. SciPy v1.8.0 Manual. https://docs.scipy.org/doc/scipy/reference/odr.html. Accessed 15 February 2022.
14. NumPy v1.22 Manual. https://numpy.org/doc/stable/reference/. Accessed 17 February 2022.
15. J.C. Schuster and Y. Du: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1795–1803.10.1007/s11661-006-0248-y ↗
16. Y. Du and J.C. Schuster: Z. Fuer Met. Res. Adv. Tech., 2001, vol. 92, pp. 28–31.
17. M.A. Dayananda: Metall. Mater. Trans. A, 1983, vol. 14A, pp. 1851–58.10.1007/BF02645555 ↗
18. B. Jönsson: Scand. J. Metall., 1995, vol. 24, pp. 21–27.
19. B.-J. Lee: CALPHAD, 1992, vol. 16, pp. 121–49.10.1016/0364-5916(92)90002-F ↗
20. A.J. Ardell and S.V. Prikhodko: Acta Mater., 2003, vol. 51, pp. 5013–19.10.1016/S1359-6454(03)00327-6 ↗
21. M.J. Aziz, Y. Zhao, H.-J. Gossmann, S. Mitha, S.P. Smith, and D. Schiferl: Phys. Rev. B, 2006, vol. 73, p. 054101.10.1103/PhysRevB.73.054101 ↗
22. F.S. Buffington and M. Cohen: JOM, 1952, vol. 4, pp. 859–60.10.1007/BF03398152 ↗
23. C.E. Campbell and A.L. Rukhin: Acta Mater., 2011, vol. 59, pp. 5194–5201.10.1016/j.actamat.2011.04.055 ↗