journal article·2022-05

On the Optimization of the Microstructural and Mechanical Properties of Model Ni-Based Superalloys Through the Alloying Effects of Refractory Mo and W Elements

Rasim Eriş, M. Vedat Akdeniz, Amdulla O. Mekhrabov

Publisher page

Abstract

In the design and development of next-generation Ni-based superalloys, the addition of refractory impurity elements not only induces better degree of bonding strengthening, but also helps in maintaining structural stability of the constituent gamma and gamma ' phases. Therefore, in this study, the potential contributions of X = Mo or W atoms to the electronic properties of coherent gamma/gamma ' interfaces as well as their effects on size, volume fraction, and shape features of gamma ' intermetallics in model Ni80Al15X5 alloys are extensively examined. Accordingly, it is argued that bigger atomic size X = W impurities, which are more prone to occupy Al sites of gamma ' phase, would further increase the precipitate volume fraction. Correspondingly, a greater amount of directional (i.e., covalent-like) bondings formed via p-d and d-d type hybridizations would enhance the mechanical strength of ternary Ni-Al-W superalloys a bit more, although X = Mo atoms seem to cause relatively strong bonding interactions within both gamma and gamma ' phases. Furthermore, the better bonding stability effect of slow-diffusing X = W atoms in gamma matrix and at gamma/gamma ' interface would lead to a remarkable delay on precipitate coarsening. In gamma ' intermetallics, the ability of X = W atoms to create much stronger and stable bondings with Al atoms compared to Al-Al pairs would prevent the dissolution of this vital phase at longer aging durations by hindering Al diffusion toward gamma matrix. The shape of gamma ' precipitates, which itself is not considered as a primary parameter for the mechanical strength, appears to govern the degree of strength worsening upon gamma ' coarsening, i.e., while regular-shaped (e.g., cubic) gamma '-Ni3Al-Mo(W) precipitates can prohibit extreme strength degradations, alternative transition X impurity additions (i.e., X = Co, Ti, Nb, or Ta) causing irregular-shaped (e.g., elongated or agglomerated) gamma ' intermetallics would accelerate the strength losses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, 1st ed. Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. T.M. Pollock and S. Tin: J. Propul. Power., 2006, vol. 22, pp. 361–74.10.2514/1.18239 ↗
3. D. Ma: Front. Mech. Eng., 2018, vol. 13(1), pp. 3–16.10.1007/s11465-018-0475-0 ↗
4. F. Wang, D. Ma, J. Zhang, L. Liu, S. Bogner, and A. Bührig-Polaczek: J. Alloy Compd., 2014, vol. 616, pp. 102–09.10.1016/j.jallcom.2014.07.084 ↗
5. A.J. Elliott, S. Tin, W.T. King, S.C. Huang, M.F.X. Gigliotti, and T.M. Pollock: Metall. Mater. Trans. A., 2004, vol. 35A, pp. 3221–31.10.1007/s11661-004-0066-z ↗
6. H. Qi, M. Azer, and A. Ritter: Metall. Mater. Trans. A., 2009, vol. 40A, pp. 2410–22.10.1007/s11661-009-9949-3 ↗
7. N.J. Harrison, I. Todd, and K. Mumtaz: Acta Mater., 2015, vol. 94, pp. 59–68.10.1016/j.actamat.2015.04.035 ↗
8. G. Bi, C.N. Sun, H.C. Chen, F.L. Ng, and C.C.K. Ma: Mater. Des., 2014, vol. 60, pp. 401–08.10.1016/j.matdes.2014.04.020 ↗
9. D.S. Ng, D.W. Chung, J.P. Toinin, D.N. Seidman, D.C. Dunand, and E.A. Lass: Mater. Sci. Eng. A., 2020, vol. 778, p. 139108.10.1016/j.msea.2020.139108 ↗
10. Y. Tu, Z. Mao, and D.N. Seidman: Appl. Phys. Lett., 2012, vol. 101, p. 121910.10.1063/1.4753929 ↗
11. M. Fährmann, P. Fratzl, O. Paris, E. Fährmann, and W.C. Johnson: Acta Metall. Mater., 1995, vol. 43(3), pp. 1007–22.10.1016/0956-7151(94)00337-H ↗
12. S. Tian, Z. Zeng, L. Fushun, C. Zhang, and C. Liu: Mater. Sci. Eng. A., 2012, vol. 543, pp. 104–09.10.1016/j.msea.2012.02.054 ↗
13. S. Wöllmer, T. Mack, and U. Glatzel: Mater. Sci. Eng. A., 2001, vol. 319–321, pp. 792–95.10.1016/S0921-5093(01)01063-2 ↗
14. C.K. Sudbrack, D. Isheim, R.D. Noebe, N.S. Jacobson, and D.N. Seidman: Microsc. Microanal., 2004, vol. 10, pp. 355–65.10.1017/S1431927604040589 ↗
15. T. Wang, G. Sheng, Z.K. Liu, and L.Q. Chen: Acta Mater., 2008, vol. 56, pp. 5544–51.10.1016/j.actamat.2008.07.024 ↗
16. J.S. Van Sluytman and T.M. Pollock: Acta Mater., 2012, vol. 60, pp. 1771–83.10.1016/j.actamat.2011.12.008 ↗
17. R. Eriş, M.V. Akdeniz, and A.O. Mekhrabov: Intermetallics., 2019, vol. 109, pp. 37–47.10.1016/j.intermet.2019.02.017 ↗
18. H. Hisazawa, Y. Terada, and M. Takeyama: Mater. Trans., 2017, vol. 58(5), pp. 817–24.10.2320/matertrans.M2016376 ↗
19. P.J. Bocchini, C.K. Sudbrack, R.D. Noebe, and D.N. Seidman: Acta Mater., 2018, vol. 159, pp. 197–208.10.1016/j.actamat.2018.08.014 ↗
20. H. Long, S. Mao, Y. Liu, Z. Zhang, and X. Han: J. Alloys Compd., 2018, vol. 743, pp. 203–20.10.1016/j.jallcom.2018.01.224 ↗
21. J.S. Van Sluytman, C.J. Moceri, and T.M. Pollock: Mater. Sci. Eng. A., 2015, vol. 639, pp. 747–54.10.1016/j.msea.2015.05.023 ↗
22. R. Eriş, M.V. Akdeniz, and A.O. Mekhrabov: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 2298–2313.10.1007/s11661-021-06222-8 ↗
23. P.A.J. Bagot, O.B.W. Silk, J.O. Douglas, S. Pedrazzini, D.J. Crudden, T.L. Martin, M.C. Hardy, M.P. Moody, and R.C. Reed: Acta Mater., 2017, vol. 125, pp. 156–65.10.1016/j.actamat.2016.11.053 ↗
24. X. Zhang, H. Deng, S. Xiao, J. Tang, L. Deng, and W. Hu: Comput. Mater. Sci., 2014, vol. 89, pp. 75–79.10.1016/j.commatsci.2014.03.019 ↗
25. P.J. Warren, A. Cerezo, and G.D.W. Smith: Mater. Sci. Eng. A., 1998, vol. 250, pp. 88–92.10.1016/S0921-5093(98)00541-3 ↗
26. X.X. Yu, C.Y. Wang, X.N. Zhang, P. Yan, and Z. Zhang: J. Alloy Compd., 2014, vol. 582, pp. 299–304.10.1016/j.jallcom.2013.07.201 ↗
27. C. Jiang and B. Gleeson: Scr. Mater., 2006, vol. 55, pp. 433–36.10.1016/j.scriptamat.2006.05.016 ↗
28. Y. Amouyal, Z. Mao, C. Booth-Morrison, and D.N. Seidman: Appl. Phys. Lett., 2009, vol. 94, p. 041917.10.1063/1.3073885 ↗
29. Y. Zhou, Z. Mao, C. Booth-Morrison, and D.N. Seidman: Appl. Phys. Lett., 2008, vol. 93, p. 171905.10.1063/1.2998654 ↗
30. R. Eriş, A.O. Mekhrabov, and M.V. Akdeniz: Philos. Mag., 2017, vol. 97(29), pp. 2615–31.10.1080/14786435.2017.1344787 ↗
31. Y. Amouyal, Z. Mao, and D.N. Seidman: Acta Mater., 2010, vol. 58, pp. 5898–5911.10.1016/j.actamat.2010.07.004 ↗
32. S. Liu, M. Wen, Z. Li, W. Liu, P. Yan, and C. Wang: Mater. Des., 2017, vol. 130, pp. 157–65.10.1016/j.matdes.2017.05.032 ↗
33. J. Popovič, P. Brož, and J. Buršík: Intermetallics., 2008, vol. 16, pp. 884–88.10.1016/j.intermet.2008.04.003 ↗
34. X. Guo, S. Antonov, F. Lu, W. Zheng, X. Yuan, J. Cormier, and Q. Feng: Mater. Sci. Eng. A., 2020, vol. 770, p. 138530.10.1016/j.msea.2019.138530 ↗
35. H. Long, Y. Liu, S. Mao, H. Wei, J. Zhang, S. Ma, Q. Deng, Y. Chen, Z. Zhang, and X. Han: Scr. Mater., 2018, vol. 157, pp. 100–05.10.1016/j.scriptamat.2018.07.041 ↗
36. H. Jiang, C. Liu, J. Dong, and M. Zhang: J. Alloys Compd., 2020, vol. 821, p. 153217.10.1016/j.jallcom.2019.153217 ↗
37. S. Gao, Y. Zhou, C.F. Li, Z.Q. Liu, and T. Jin: J. Alloys Compd., 2016, vol. 671, pp. 458–64.10.1016/j.jallcom.2016.02.122 ↗
38. H. Long, S. Mao, Y. Liu, H. Yang, H. Wei, Q. Deng, Y. Chen, A. Li, Z. Zhang, and X. Han: Acta Mater., 2020, vol. 185, pp. 233–44.10.1016/j.actamat.2019.12.014 ↗
39. A.C. Yeh and S. Tin: Metall. Mater. Trans. A., 2006, vol. 37A, pp. 2621–31.10.1007/BF02586097 ↗
40. K. Matuszewski, R. Rettig, H. Matysiak, Z. Peng, I. Povstugar, P. Choi, J. Müller, D. Raabe, E. Spiecker, K.J. Kurzydłowski, and R.F. Singer: Acta Mater., 2015, vol. 95, pp. 274–83.10.1016/j.actamat.2015.05.033 ↗
41. C. Ai, Q. Li, J. Zhang, H. Su, W. Yang, L. Liu, Y. Ru, H. Zhang, Y. Song, Y. Chen, S. Li, and S. Gong: Intermetallics., 2021, vol. 134, p. 107198.10.1016/j.intermet.2021.107198 ↗
42. Y.C. Lin and C.Y. Wang: J. Alloy Compd., 2020, vol. 838, p. 155141.10.1016/j.jallcom.2020.155141 ↗
43. O.M. Horst, D. Adler, P. Git, H. Wang, J. Streitberger, M. Holtkamp, N. Jöns, R.F. Singer, C. Körner, and G. Eggeler: Mater. Des., 2020, vol. 195, p. 108976.10.1016/j.matdes.2020.108976 ↗
44. H. Yan, S. Tian, G. Zhao, and S. Zhang: Mater. High Temp., 2020, vol. 37(2), pp. 139–44.10.1080/09603409.2020.1718332 ↗
45. L. Zhang, Z. Huang, L. Jiang, J. Luan, Z. Jiao, and C.T. Liu: Mater. Sci. Eng. A., 2019, vol. 744, pp. 481–89.10.1016/j.msea.2018.12.043 ↗
46. P.M. Mignanelli, N.G. Jones, M.C. Hardy, and H.J. Stone: Mater. Sci. Eng. A., 2014, vol. 612, pp. 179–86.10.1016/j.msea.2014.06.021 ↗
47. C.K. Sudbrack, T.D. Ziebell, R.D. Noebe, and D.N. Seidman: Acta Mater., 2008, vol. 56(3), pp. 448–63.10.1016/j.actamat.2007.09.042 ↗
48. J.P. Perdew, K. Burke, and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, pp. 3865–68.10.1103/PhysRevLett.77.3865 ↗
49. A.A. Oni, S.R. Broderick, K. Rajan, and J.M. LeBeau: Intermetallics., 2016, vol. 73, pp. 72–78.10.1016/j.intermet.2016.03.006 ↗
50. J. Chen, Q. Huo, J. Chen, Y. Wu, Q. Li, C. Xiao, and X. Hui: Mater. Sci. Eng. A., 2021, vol. 799, p. 140163.10.1016/j.msea.2020.140163 ↗
51. T. Syukri, T. Ban, Y. Ohya, and Y. Takahashi: Mater. Chem. Phys., 2003, vol. 78, pp. 645–49.10.1016/S0254-0584(02)00185-2 ↗
52. J. Zhang, M.A. Pilette, F. Cuevas, T. Charpentier, F. Mauri, and M. Latroche: J. Phys. Chem. C., 2009, vol. 113, pp. 21242–52.10.1021/jp9044995 ↗
53. M. Beck, M. Ellner, and E.J. Mittemeijer: Acta Mater., 2001, vol. 49, pp. 985–93.10.1016/S1359-6454(00)00399-2 ↗
54. A. Gorbunoff, A.A. Levin, and D.C. Meyer: J. Alloys Compd., 2009, vol. 480, pp. 152–56.10.1016/j.jallcom.2008.10.039 ↗
55. X.D. Dai, Y. Kong, J.H. Li, and B.X. Liu: J. Phys. Condens. Matter., 2006, vol. 18, pp. 4527–42.10.1088/0953-8984/18/19/008 ↗
56. N.J. Calos, J.S. Forrester, and G.B. Schaffer: J. Solid State Chem., 2001, vol. 158, pp. 268–78.10.1006/jssc.2001.9107 ↗
57. M.E. Straumanis and S. Zyszczynski: J. Appl. Crystallogr., 1970, vol. 3, pp. 1–6.10.1107/S002188987000554X ↗
58. W.C. Wang, Y.X. Shen, J.H. Li, X.Y. Li, and B.X. Liu: J. Phys., 2006, vol. 18, pp. 9911–16.
59. T. Novoselova, S. Malinov, W. Sha, and A. Zhecheva: Mater. Sci. Eng. A., 2004, vol. 371, pp. 103–112.10.1016/j.msea.2003.12.015 ↗
60. S. Ochiai, Y. Oya, and T. Suzuki: Acta Metall., 1984, vol. 32, pp. 289–98.10.1016/0001-6160(84)90057-9 ↗
61. S.N. Sun, N. Kioussis, S.P. Lim, A. Gonis, and W.H. Gourdin: Phys. Rev. B., 1995, vol. 52(20), pp. 14421–30.10.1103/PhysRevB.52.14421 ↗
62. H.K. Zhang, J.S. Chen, L.X. Zhang, Z. Yu, P. Zhang, Y.Z. Zhang, C. Yu, and H. Lu: Phase Transit., 2020, vol. 93(1), pp. 158–74.10.1080/01411594.2019.1692015 ↗
63. Y. Huang, Z. Mao, R.D. Noebe, and D.N. Seidman: Acta Mater., 2016, vol. 121, pp. 288–98.10.1016/j.actamat.2016.09.005 ↗
64. Y. Huang, Z. Mao, R.D. Noebe, and D.N. Seidman: J. Alloys Compd., 2019, vol. 799, pp. 377–88.10.1016/j.jallcom.2019.05.292 ↗
65. J. Zhang, L. Liu, T. Huang, J. Chen, K. Cao, X. Liu, J. Zhang, and H. Fu: J. Mater. Sci. Technol., 2021, vol. 62, pp. 1–10.10.1016/j.jmst.2020.05.034 ↗
66. W. Yang, P. Qu, J. Sun, Q. Yue, H. Su, J. Zhang, and L. Liu: Vacuum., 2020, vol. 181, p. 109682.10.1016/j.vacuum.2020.109682 ↗
67. B.X. Cao, T. Yang, L. Fan, J.H. Luan, Z.B. Jiao, and C.T. Liu: Mater. Sci. Eng. A., 2020, vol. 797, p. 140020.10.1016/j.msea.2020.140020 ↗
68. A.J. Goodfellow, E.I. Galindo-Nava, C. Schwalbe, and H.J. Stone: Mater. Des., 2019, vol. 173, p. 107760.10.1016/j.matdes.2019.107760 ↗
69. C. Ai, L. Xi, B. Wang, Y. Sun, J. Zhang, H. Su, W. Yang, L. Liu, Z. Sun, and Y. Chen: Intermetallics., 2020, vol. 125, p. 106896.10.1016/j.intermet.2020.106896 ↗
70. Y. Chen, R. Hu, H. Kou, T. Zhang, and J. Li: Scr. Mater., 2014, vol. 76, pp. 49–52.10.1016/j.scriptamat.2013.12.013 ↗
71. B.C. Wilson, E.R. Cutler, and G.E. Fuchs: Mater. Sci. Eng. A., 2008, vol. 479, pp. 356–64.10.1016/j.msea.2007.07.030 ↗
72. M. Rafiei, H. Mirzadeh, M. Malekan, and M.J. Sohrabi: J. Alloy Compd., 2019, vol. 793, pp. 277–82.10.1016/j.jallcom.2019.04.147 ↗
73. M.S.A. Karunaratne, C.M.F. Rae, and R.C. Reed: Metall. Mater. Trans. A., 2001, vol. 32A, pp. 2409–21.10.1007/s11661-001-0032-y ↗
74. A. Borouni and A. Kermanpur: J. Mater. Eng. Perform., 2020, vol. 29, pp. 7567–86.10.1007/s11665-020-05189-8 ↗
75. C. Ai, L. Liu, J. Zhang, M. Guo, Z. Li, T. Huang, J. Zhou, S. Li, S. Gong, and G. Liu: J. Alloy Compd., 2018, vol. 754, pp. 85–92.10.1016/j.jallcom.2018.04.301 ↗
76. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solid., 1961, vol. 19, pp. 35–50.10.1016/0022-3697(61)90054-3 ↗
77. C. Wagner: Z. Elektrochem., 1961, vol. 65, pp. 581–91.
78. M.S. Atas and M. Yildirim: J. Mater. Eng. Perform., 2020, vol. 29, pp. 4421–34.10.1007/s11665-020-04926-3 ↗
79. Y. Pan, L. Zhang, Z. Huang, and L. Jiang: Mater. Lett., 2019, vol. 241, pp. 210–13.10.1016/j.matlet.2019.01.066 ↗
80. P. Qu, W. Yang, J. Qin, C. Liu, K. Cao, J. Zhang, and L. Liu: Intermetallics., 2020, vol. 119, p. 106725.10.1016/j.intermet.2020.106725 ↗
81. R.A. Mackay, M.V. Nathal, and D.D. Pearson: Metall. Mater. Trans. A., 1990, vol. 21A(2), pp. 381–88.10.1007/BF02782418 ↗
82. N.C. Ritter, R. Sowa, J.C. Schauer, D. Gruber, T. Goehler, R. Rettig, E. Povoden-Karadeniz, C. Koerner, and R.F. Singer: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 3206–16.10.1007/s11661-018-4730-0 ↗
83. Y. Wu, Y. Liu, C. Li, X. Xia, J. Wu, and H. Li: J. Alloy Compd., 2019, vol. 771, pp. 526–33.10.1016/j.jallcom.2018.08.265 ↗
84. L. Lu, R. Schwaiger, Z.W. Shan, M. Dao, K. Lu, and S. Suresh: Acta Mater., 2005, vol. 53, pp. 2169–79.10.1016/j.actamat.2005.01.031 ↗
85. Q. Wei, S. Cheng, K.T. Ramesh, and E. Ma: Mater. Sci. Eng. A., 2004, vol. 381, pp. 71–79.10.1016/j.msea.2004.03.064 ↗
86. X. He, C. Liu, Y. Yang, J. Ding, X. Chen, X. Xia, Y. Tang, and Y. Liu: J. Alloy Compd., 2021, vol. 872, p. 159674.10.1016/j.jallcom.2021.159674 ↗
87. H.J. Zhou, F. Xue, H. Chang, and Q. Feng: J. Mater. Sci. Technol., 2018, vol. 34, pp. 799–805.10.1016/j.jmst.2017.04.012 ↗
88. A.J. Ardell and V. Ozolins: Nat. Mater., 2005, vol. 4, pp. 309–16.10.1038/nmat1340 ↗
89. T. Zhou, H. Ding, X. Ma, W. Feng, H. Zhao, Y. Meng, H. Zhang, and Y. Lv: Mater. Sci. Eng. A., 2018, vol. 725, pp. 299–308.10.1016/j.msea.2018.04.037 ↗
90. E. Cavaletti, S. Naveos, S. Mercier, P. Josso, M.P. Bacos, and D. Monceau: Surf. Coat. Technol., 2009, vol. 204, pp. 761–65.10.1016/j.surfcoat.2009.09.072 ↗