The Microstructure of Cast Steel Subjected to Austempering and B-Q&P Heat Treatment
Source abstract
Abstract
The aim of this work was to characterize the microstructure and properties of cast steel after austempering heat treatment, which would make it possible to produce a carbide-free nanobainite. In order to design heat treatment parameters, dilatometric measurements of phase transformation kinetics were performed on cast steel samples. This study made it possible to construct a time-temperature-transformation diagram and to design the heat treatment parameters. Following this, the most suitable heat treatment parameters were chosen. The heat treatment consisted of austenitizing, followed by quenching with an isothermal stop at the temperature at which bainitic transformation occurred, and final quenching to room temperature. Four different durations of austempering were used at the same temperature of 250 °C to obtain a 55, 75, 85 and 100 pct degree of advancement of bainitic transformation. After 55 and 75 pct bainitic transformation, a martensitic transformation occurred in the remaining austenite during quenching to room temperature. In these cases, a partitioning process consisting of additional annealing at 250 °C, was then applied This kind of heat treatment has not been used in cast steel earlier All heat-treated samples were subjected to microscopic studies at various scales of observation with the use of light microscopy (LM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The observations revealed that the heat treatment produced a strongly refined multiphase microstructure and revealed its dependence on the austempering duration. The obtained microstructures provided high tensile strength, however toughness strongly depended on applied heat treatment parameters.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. D. Poweleit, R. Monroe: Casting Source Directory, 2006, pp. 24-29.
2. A. Dulęba: Stal Met. Nowe Technol, 2016, Vol. 1–2, pp. 116
3. D. Myszka, K. Wasiluk, E. Skołek, and W. Świątnicki: Mater. Sci. Technol., 2015, vol. 31(7), pp. 829–34. https://doi.org/10.1179/1743284714Y.0000000733.10.1179/1743284714Y.0000000733 ↗
4. S.K. Putatunda: Development of nanostructure austempered ductile iron with dual phase microstructure, patent no WO2014145421A2, 2014
5. S.K. Putatunda, S. Panneerselvam, M. Alshwigi: Proceedings of the 28th ASM Heat Treating Society Conference, October 20–22 2015, 2015, pp. 71-7510.31399/asm.cp.ht2015p0071 ↗
6. C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43(8), pp. 1238–43. https://doi.org/10.2355/isijinternational.43.1238.10.2355/isijinternational.43.1238 ↗
7. H. Beladi, Y. Adachi, I. Timokhina, and P.D. Hodgson: Scripta Mater., 2009, vol. 60(6), pp. 455–8. https://doi.org/10.1016/j.scriptamat.2008.11.030.10.1016/j.scriptamat.2008.11.030 ↗
8. H.K.D.H. Bhadeshia, Proc. R. Soc. A 2009, vol. 466 (2113), pp. 3–18 Doi: https://doi.org/10.1098/rspa.2009.040710.1098/rspa.2009.0407 ↗
9. A. Grajcar, A. Skowronek, and K. Radwański: Mater. Sci. Eng., A., 2022, vol. 830, p. 142300. https://doi.org/10.1016/j.msea.2021.142300.10.1016/j.msea.2021.142300 ↗
10. A. Kozłowska, A. Grajcar, A. Janik, K. Radwański, U. Krupp, K. Matus, and M. Morawiec: Archiv. Civ Mech. Eng., 2021, vol. 21, p. 133. https://doi.org/10.1007/s43452-021-00284-6.10.1007/s43452-021-00284-6 ↗
11. K. Sugimoto, T. Hojo, J. Kobayashi, Materials Science and Technology, 2005-2009 33:17, 2005–2009. Doi: https://doi.org/10.1080/02670836.2017.135601410.1080/02670836.2017.1356014 ↗
12. Q. Luo, M. Kitchen, S. Abubakri, Metals, 2017, vol. 7(7), pp. 258 DOI:https://doi.org/10.3390/met707025810.3390/met7070258 ↗
13. W. Zhou, T. Hou, C. Zhang, L. Zhong, K. Wu, Metals, 2018, vol. 8 (11), pp. 907 DOI:https://doi.org/10.3390/met811090710.3390/met8110907 ↗
14. F. Peng, Y. Xu, J. Li, X. Gu, and X. Wang: Mater. Des., 2019, vol. 181, p. 107921. https://doi.org/10.1016/j.matdes.2019.107921.10.1016/j.matdes.2019.107921 ↗
15. Y. Huang, Q. Li, X. Huang, and W. Huang: Mater. Sci. Eng., A., 2016, vol. 678, pp. 339–46. https://doi.org/10.1016/j.msea.2016.10.011.10.1016/j.msea.2016.10.011 ↗
16. H. Guo, G. Gao, X. Gui, R.D.K. Misra, and B. Bai: Mater. Sci. Eng., A., 2016, vol. 667, pp. 224–31. https://doi.org/10.1016/j.msea.2016.05.004.10.1016/j.msea.2016.05.004 ↗
17. B. Bai, G. Gao, X. Gui, Z. Tan, and Y. Weng: Heat Treat. Surf. Eng. A., 2019, vol. 1(1–2), pp. 63–71. https://doi.org/10.1080/25787616.2018.1560133.10.1080/25787616.2018.1560133 ↗
18. X. Gui, G. Gao, H. Guo, F. Zhao, Z. Tan, and B. Bai: Mater. Sci. Eng. A., 2017, vol. 684, pp. 598–605. https://doi.org/10.1016/j.msea.2016.12.097.10.1016/j.msea.2016.12.097 ↗
19. D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A., 2006, vol. 438–440(2006), pp. 25–34. https://doi.org/10.1016/j.msea.2006.02.133.10.1016/j.msea.2006.02.133 ↗
20. J. G. Speer, D. V. Edmonds, F. C. Rizzo, D. K. Matlock, Current Opinion in Solid State and Materials Science, 2004, 8(3-4), 2004, pp. 219-237 Doi: https://doi.org/10.1016/j.cossms.2004.09.00310.1016/j.cossms.2004.09.003 ↗
21. A.J. Clarke, J.G. Speer, M.K. Miller, R.E. Hackenberg, D.V. Edmonds, D.K. Matlock, F.C. Rizzo, K.D. Clarke, and E. De Moor: Acta Mater., 2008, vol. 56, pp. 16–22. https://doi.org/10.1016/j.actamat.2007.08.051.10.1016/j.actamat.2007.08.051 ↗
22. J.W. Jin, C. Park, and N. Kang: J. Weld. Joining., 2017, vol. 35(1), pp. 89–94. https://doi.org/10.5781/JWJ.2017.35.1.89.10.5781/JWJ.2017.35.1.89 ↗
23. K. Wasiak, E. Skołek, and W.A. Światnicki: Arch. Metall. Mater., 2016, vol. 61(3), pp. 1683–8. https://doi.org/10.1515/amm-2016-0274.10.1515/amm-2016-0274 ↗
24. K. Wasiak, Stal, Met. Nowe Technol, 2015, vol. 7–8, pp. 62–65.
25. B. Kim, J. Sietsma, and M.J. Santofimia: Mater. Des., 2017, vol. 127, pp. 336–45. https://doi.org/10.1016/j.matdes.2017.04.080.10.1016/j.matdes.2017.04.080 ↗
26. W.A. Świątnicki, P. Radowski, K. Dudzińska, K. Wasiak The method of heat treatment of steel, patent no PAT.234490, 2019
27. E. Skołek, K. Dudzińska, J. Kamiński, and W.A. Świątnicki: Arch. Metall. Mater., 2015, vol. 60(1), pp. 503–9. https://doi.org/10.1515/amm-2015-0081.10.1515/amm-2015-0081 ↗
28. K. Wasiluk, E. Skołek, and W. Świątnicki: Proc. Mod. Steels Iron Alloys., 2018, vol. 2018, p. 84.
29. F.G. Caballero, C. Garcia-Mateo, M.J. Santofimia, M.K. Miller, and C. Garcia de Andres: Acta Mater., 2009, vol. 57(1), pp. 8–17. https://doi.org/10.1016/j.actamat.2008.08.041L.10.1016/j.actamat.2008.08.041L ↗
30. C. Chang and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1995, vol. 11(9), pp. 874–82. https://doi.org/10.1179/mst.1995.11.9.874.10.1179/mst.1995.11.9.874 ↗
31. R.B. Gundlach and J.F. Janowak: Met. Prog., 1985, vol. 128(2), pp. 19–26.
32. J.F. Janowak, P.A. Norton, A.F.S Transaction, 1985, vol. 88, pp. 123–135
33. J.F. Janowak, R.B. Gundlach, G.T. Eldis, K. Rohrting, A.F.S International Cast Met. J., 1982, vol. 6, pp. 28–32
34. D. Liu, B. Bai, H. Fang, W. Zhang, J. Gu, and K. Chang: Mater. Sci. Eng. A., 2004, vol. 371(1–2), pp. 40–4. https://doi.org/10.1016/S0921-5093(03)00270-3.10.1016/S0921-5093(03)00270-3 ↗
35. T. Sourmail and M. Millot-Méheux: Mater. Sci. Technol., 2016, vol. 32(11), pp. 1126–32. https://doi.org/10.1080/02670836.2015.1112460.10.1080/02670836.2015.1112460 ↗
36. S.K. Putatunda: Mater. Manuf. Processes., 2001, vol. 16(6), pp. 743–62. https://doi.org/10.1081/AMP-100108696.10.1081/AMP-100108696 ↗
37. S.K. Putatunda: Mater. Sci. Eng., A., 2001, vol. 297(1–2), pp. 31–43. https://doi.org/10.1016/s0921-5093(00)01272-7.10.1016/s0921-5093(00)01272-7 ↗
38. J. Zhang, H. Ding, and R.D.K. Mater: Mater. Sci. Eng. A., 2015, vol. 636, pp. 53–9. https://doi.org/10.1016/j.msea.2015.03.095.10.1016/j.msea.2015.03.095 ↗
39. G. Gao, H. Zhang, X. Gui, P. Luo, Z. Tan, and B. Bai: Acta Mater., 2014, vol. 76, pp. 425–33. https://doi.org/10.1016/j.actamat.2014.05.055.10.1016/j.actamat.2014.05.055 ↗
40. X.C. Xiong. B. Chen, M.X. Huang, J.F. Wang, L. Wang, Scr. Mater. 2013, vol. 68(5), 321–32410.1016/j.scriptamat.2012.11.003 ↗
41. L. Morales-Rivas, C. Garcia-Mateo, T. Sourmail, M. Kuntz, R. Rementeria, F. Caballero: Metals, 2016, vol. 6(12), 302. https://doi.org/10.3390/met6120302.10.3390/met6120302 ↗
42. Ansys Granta EduPack software (2021), https://www.ansys.com/products/materials/granta-edupack