journal article·2021-01Open access

Evidence of Martensitic Transformation in Fe-Mn-Al Steel Similar to Maraging Steel

Gurumayum Robert Kenedy, Yi-Jyun Lin, Wei-Chun Cheng

Abstract

Abstract The Fe-Mn-Al steels claim a low density, and some fall into the category of transformation-induced plasticity (TRIP) steel. In Fe-Mn-Al TRIP steel development, phase transformations play an important role. Herein, the martensitic transformation of an Fe-16.7 Mn-3.4 Al ternary alloy (wt pct) was experimentally discovered, whose equilibrium phases are a single phase of austenite at 1373 K and dual phases of ferrite and austenite at low temperature. Ferritic lath martensite forms in the prior austenite grains after cooling from 1373 K under various cooling rates via quenching, air cooling, and furnace cooling. The formation mechanism of the ferritic lath martensite is different from that of traditional ferritic lath martensite in steel and quite similar to that in maraging steel. A slight strain energy coupled with a small temperature gradient can lead to the formation of ferritic lath martensite in the Fe-Mn-Al alloy after cooling from high temperature. It is also found that micro-twins exist in the ferritic lath martensite.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. H. Kim, D.W. Suh and N.J. Kim: Sci. Technol. Adv. Mater., 2013, vol. 14, pp. 014205-0142015.10.1088/1468-6996/14/1/014205 ↗
2. S. Chen, R. Rana, A. Haldar and R.K. Ray: Prog. Mater. Sci., 2017, vol. 89, pp. 345-391.10.1016/j.pmatsci.2017.05.002 ↗
3. J.-E. Jin and Y.-K. Lee: Acta Mater., 2012, vol. 60, pp. 1680-1688.10.1016/j.actamat.2011.12.004 ↗
4. J. Han, S.H. Kang, S.J. Lee, M. Kawasaki, H.J. Lee, D. Ponge, D. Raabe and Y.K. Lee: Nat. Commun., 2017, vol. 8, pp. 1-6.10.1038/s41467-016-0009-6 ↗
5. W.C. Cheng and H.Y. Lin: Mater. Sci. Eng. A, 2002, vol. 323, pp. 462-466.10.1016/S0921-5093(01)01498-8 ↗
6. W.C. Cheng, H.Y. Lin and C.F. Liu: Mater. Sci. Eng. A, 2002, vol. 335, pp. 82-88.10.1016/S0921-5093(01)01947-5 ↗
7. W.C. Cheng and C.K. Lai: Scr. Mater., 2006, vol. 55, pp. 783-786.10.1016/j.scriptamat.2006.07.023 ↗
8. W.B. Lee, F.R. Chen, S.K. Chen, G.B. Olson and C.M. Wan: Acta Metall. Mater., 1995, vol. 43, pp. 21-30.
9. H.Y. Chu, F.R Chen and T.B. Wu: Scr. Metall. Mater., 1995, vol. 33, pp. 1269-1275.10.1016/0956-716X(95)00363-Z ↗
10. W.C. Cheng, C.F. Liu and Y.F. Lai: Scr. Mater., 2003, vol. 48, pp. 295-300.10.1016/S1359-6462(02)00378-0 ↗
11. W.C. Cheng, Y.C. Lin and C.F. Liu: Mater. Sci. Eng. A, 2003, vol. 343, pp. 28-35.10.1016/S0921-5093(02)00369-6 ↗
12. W.C. Cheng, Y.S. Lin and K.F. Chen: Scr. Mater., 2014, vol. 81, pp. 36-39.10.1016/j.scriptamat.2014.02.021 ↗
13. P.M. Kelly: Trans. Metall. Soc. AIME, 1965, vol. 233, pp. 264.
14. C.M. Wayman and R. Bullough: Trans. Metall. Soc. AIME, 1966, vol. 236, pp.1711.
15. D.A. Porter, K.E. Easterling and M.Y. Sherif: Phase Transformations in Metals and Alloys, 4th ed., CRC Press: New York, 2009, pp. 391-396.
16. T. Maki, K. Tsuzaki, and I. Tamura: Trans. Iron Steel Inst. Jpn., 1979, vol. 65, pp. 515-24.10.2355/tetsutohagane1955.65.5_515 ↗
17. G. Krauss, and A.R. Marder: Metall. Trans., 1971, vol. 2, pp. 2343-2357.10.1007/BF02814873 ↗
18. A.M. Hall and C.J. Slunder: NASA Technology Utilization Publications, Washington DC, 1968, pp. 27–28
19. M.K. Banerjee: Comprehensive Materials Finishing, 2017, vol. 2, pp. 180-213.10.1016/B978-0-12-803581-8.09190-6 ↗
20. A. Magnee, J.M. Drapier, J. Dumont, D. Goutsouradis, and L. Habraken: Cobalt-Containing High-Strength Steels, Centre d’Information du Cobalt: Brussels, 1974, pp. 23–42.
21. L. Remy: Metall. Trans. A, 1977, vol. 8, pp. 253-258.10.1007/BF02661637 ↗
22. R.A. Ricks, S.A. Parsons and P.R. Howell: in Proc. Int. Conf.: H.I. Aaronson et al.-editor, TMS-AIME, 1982, p. 831.