journal article·2020-12

Effect of Isothermal Heat Treatment at 760 °C on the Oxidation Behavior of Ti-Al-Zr Alloy

Prafful Kumar Sinha, Vivekanand Kain

Publisher page

Abstract

This study reports the oxidation behavior of an alpha titanium alloy, Ti-Al-Zr. The alloy was isothermally heat-treated in the air at 760 °C for durations up to 700 hours. Heat treatment led to the formation of an oxide layer on the surface and an alpha case beneath the oxide layer. The oxide and the alpha case were characterized by optical microscopy, micro-hardness measurement, scanning electron microscopy (SEM), X-ray diffraction (XRD) and glow discharge optical emission spectroscopy (GDOES). The oxide was predominantly rutile; however, other metal oxides were also present. An oxide growth mechanism has been proposed. An alpha case of a maximum depth of 646 μm was measured for the specimen exposed for 700 hours. The diffusion coefficient of oxygen in the metal matrix was calculated to be 8.83 × 10−14 m2/s. The alpha case formation led to straining of the matrix because of oxygen dissolution. Micro-strain was calculated from XRD measurements using the “Modified Williamson–Hall (Modified W–H)” method. A maximum micro-strain of 0.37 pct was calculated for the prismatic plane (110) for a 72 hours exposed specimen. A decreasing trend in the micro-strain value with increasing exposure time has been reported and explained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. [1] Gerd Lütjering and James C.Williams: Titanium, 2nd ed., Springer, New York, 2017, pp. 50-51.
2. C. Leyens and M. Peters: Titanium and Titanium Alloys: Fundamentals and Applications, Wiley, Weinheim, 200, p. 198
3. [3] K.S. Chan, M. Koike, B.W. Johnson and T. Okabe: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 171–180.10.1007/s11661-007-9406-0 ↗
4. [4] S.Y. Sung and Y.J. Kim: Mater. Sci. Eng. A, 2005, vol. 405, pp. 173–177.10.1016/j.msea.2005.05.092 ↗
5. [5] X. Chamorro, N. Herrero-Dorca, P.P. Rodríguez, U. Andrés and Z. Azpilgain: J. Mater. Process. Technol., 2017, vol. 243, pp.75–81.10.1016/j.jmatprotec.2016.12.007 ↗
6. [6] D. Jordan: Heat Treating Prog., 2008, vol. 8, pp. 45–47.
7. [7] L. Bendersky and A. Rosen: Eng. Fract. Mech., 1980, vol.13, pp.111–118.10.1016/0013-7944(80)90046-6 ↗
8. [8] C. Leyens, M. Peters, D.Weinem and W.A. Kaysser: Metall. Mater. Trans. A, 1996, vol. 27, pp. 1709–1717.10.1007/BF02649829 ↗
9. [9] R.W. Evans, R.J. Hull and B. Wilshire: J. Mater. Process. Technol., 1996, vol. 56, pp. 492–501.10.1016/0924-0136(96)85109-0 ↗
10. [10] R. Gaddam, M.L. Antti and R. Pederson: Mater. Sci. Eng. A, 2014, vol. 599, pp. 51–56.10.1016/j.msea.2014.01.059 ↗
11. [11] W. Jia, W. Zeng, X. Zhang, Y. Zhou, J. Liu and Q. Wang: J. Mater. Sci., 2011, vol. 46, pp.1351–1358.10.1007/s10853-010-4926-1 ↗
12. [12]P. Kofstad, P. B. Anderson and O. J. Krudtaa: J. Le. Common Met., 1961,vol.3, pp.89-9710.1016/0022-5088(61)90001-7 ↗
13. [13] P. Kofstad: J. Le. Common Met.,1967, vol.12, pp. 449-464.10.1016/0022-5088(67)90017-3 ↗
14. [14] J. E. L. Gomes and A. M. Huntzt: Oxid. Met., 1980, vol. 14, pp. 249-261.10.1007/BF00604567 ↗
15. [15] J. E. L. Gomes and A. M. Huntzt: Oxid. Met., 1980, vol.14, pp. 471-497.10.1007/BF00603475 ↗
16. [16] Y. S. Chen and C. J. Rosa: Oxid. Met., 1980, vol. 14, pp. 147-65.10.1007/BF00603991 ↗
17. [17] Y. S. Chen and C. J. Rosa: Oxid. Met.,1980, vol.14, pp. 167-185.10.1007/BF00603992 ↗
18. [18] G. Bertrand, K. Jarraya and J. M. Chaix: Oxid. Met., 1983, vol. 21, pp. 1-19.10.1007/BF00659464 ↗
19. [19] J. Unnam, R. N. Shenoy and R. K. Clark: Oxid. Met., 1986, vol. 26, pp. 231-252.10.1007/BF00659186 ↗
20. [20] R. N. Shenoy, J. Unnam and R. K. Clark: Oxid. Met., 1986, vol. 26, pp. 105-124.10.1007/BF00664276 ↗
21. [21] H. L. Du, P. K. Datta, D. B. Lewis and J. S. B. Gray, Corros. Sci., 1994, vol. 36, pp. 631-642.10.1016/0010-938X(94)90069-8 ↗
22. [22] R. J. Hanrahan, Jr. and D. P. Butt: Oxid. Met., 1997, vol.47, pp. 317-353.10.1007/BF01668517 ↗
23. [23] I. Gurrappa: J. Alloys Compd., 2005, vol. 389, pp. 190–197.10.1016/j.jallcom.2004.05.079 ↗
24. [24] H. Guleryuz and H. Cimenoglu: J. Alloys Compd., 2009, vol. 472, pp. 241–246.10.1016/j.jallcom.2008.04.024 ↗
25. [25] K. S. McReynolds and S.T. Kandala: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1732-1736.10.1007/s11661-011-0710-3 ↗
26. [26] R. Gaddam, B. Sefer, R. Pederson and M.L. Antti: Mater. Charact., 2015, vol. 99, pp. 166–174.10.1016/j.matchar.2014.11.023 ↗
27. [27] F. Omidbakhsh, A. R. Ebrahimi and J. Sojka: Oxid. Met., 2015, vol. 84, pp. 33–44.10.1007/s11085-015-9539-2 ↗
28. [28] S. Tkachenko, O. Datskevich, K. Dvorak, Z. Spotz, L.Kulak and L. Celko: J. Alloys Compd., 2017, vol. 694, pp. 1098-1108.10.1016/j.jallcom.2016.10.044 ↗
29. [29] E. Dong, W.Yu, Q. Cai, L. Cheng and J. Shi: Oxid. Met., 2017, vol. 88, pp. 719–732.10.1007/s11085-017-9770-0 ↗
30. [30] Y. Shida and H. Anada: Oxid. Met., 1996, vol.45, pp. 197-219.10.1007/BF01046826 ↗
31. [31] J.L. Murray and H.A. Wriedt: Bull. Alloy Phase Diagrams, 1987, vol. 8, pp. 148-65.10.1007/BF02873201 ↗
32. [32] Z.Liu and G.Welsch: Metall. Trans. A, 1988, vol. 19A, pp. 1121–1125.10.1007/BF02628396 ↗
33. C. E. Shamblen,T. K. Redden, in The Science, Technology and Application of Titanium, R. I. Jaffee and N. E. Promisel, eds. (Pergamon Press, New York, 1968), pp. 199–208.
34. [34] S. Kumar, T.S.N.S.Narayanan, S.G.S. Raman and S.K. Seshadri: Mater. Chem. Phys., 2010, vol. 119, pp. 337–34610.1016/j.matchemphys.2009.09.007 ↗
35. [35]R Gaddam, B Sefer, R Pederson and M-L Antti: IOP conf. Ser. : Mater. Sci. Eng., 2013, vol. 48, 012002.
36. [36] Thomas Nelis, Richard Payling and Neil W. Barneet: Glow Discharge Optical Emission Spectroscopy: A Practical Guide,The Royal Society of chemistry, U.K., 2003.
37. [37] M. Wilke, G.Teichert, R. Gemma, A. Pundt, R. Kirchheim, H. Romanus and P. Schaaf: Thin Solid Films, 2011, vol. 520, pp. 1660–1667.10.1016/j.tsf.2011.07.058 ↗
38. E. Grigore, C. Ruset, M. Firdaouss, P. Petersson, I. Bogdanovic Radovic and Z. Siketic: Surf. Coat. Technol.,2019, vol. 376, pp. 21-24.10.1016/j.surfcoat.2018.11.057 ↗
39. [39] D. Pradhan, A. Mondal, A. Chakraborty, M. Manna and M. Dutta: Surf. Coat. Technol., 2019, vol. 375, pp. 427–441.10.1016/j.surfcoat.2019.07.047 ↗
40. J. Qi and G.E. Thompson: Appl. Surf. Sci., 2016, vol.377, pp. 109-120.10.1016/j.apsusc.2016.03.115 ↗
41. [41] M. Uemura, T. Yamamoto, K. Fushimi, Y. Aoki, K. Shimizu, and H. Habazaki: Corros. Sci., 2009, vol. 51, pp. 1554–1559.10.1016/j.corsci.2008.11.017 ↗
42. [42] M. Mouanga,P.Berçot and J.Y. Rauch: Corros. Sci., 2010, vol. 52, pp. 3984–3992.10.1016/j.corsci.2010.08.003 ↗
43. [43] V. Moutarlier, S. Lakard, T. Patois, and B. Lakarda: Thin Solid Films, 2014, vol. 550, pp. 27–35.10.1016/j.tsf.2013.10.037 ↗
44. [44] M. Laveissière, H. Cerda, J. Roche, L. Cassayre and L. Arurault: Surf. Coat. Technol.,2019, vol. 361, pp. 50–62.10.1016/j.surfcoat.2018.12.122 ↗
45. [45] K. Shimizu, G.M. Brown, H. Habazaki, K. Kobayashi,P. Skeldon, G.E. Thompson and G.C. Wood: Corros. Sci., 2001, vol. 43, pp. 199-205.10.1016/S0010-938X(00)00062-7 ↗
46. [46] I.D. Graeve, I. Schoukens, A.Lanzutti, F. Andreatta, A. Alvarez-Pampliega, J.D. Strycker, L. Fedrizzi and H Terryn: Corros. Sci., 2013, vol.76, pp. 325–336.10.1016/j.corsci.2013.07.005 ↗
47. [47] F. N. Afshar, R. Ambat, C. Kwakernaak, J.H.W. de Wita, J.M.C. Mol and H. Terryn: Electrochim. Acta., 2012, vol. 77, pp. 285– 293.10.1016/j.electacta.2012.06.023 ↗
48. [48] A. El Hajjami, M.P. Gigandet, M. De Petris-Wery, J.C. Catonne and J.J. Duprat: Appl. Surf. Sci., 2007, vol. 254, pp. 480–489.10.1016/j.apsusc.2007.06.016 ↗
49. [49] J. Flis, J. Mankowski and T. Zakroczymski: Corros. Sci., 2000, vol. 42, pp. 313-327.10.1016/S0010-938X(99)00087-6 ↗
50. J.A. García, R.J. Rodríguez, R. Martínez, C. Fernández, A. Fernández and R. Payling: Appl. Surf. Sci., 2004, vol. 235, pp. 97–102.10.1016/j.apsusc.2004.05.123 ↗
51. M. Pancielejkoand, W. Precht: J. Mater. Process. Technol. 2004, vol. 157–158, pp. 394–398.10.1016/j.jmatprotec.2004.09.061 ↗
52. E. DeLasHeras, G. Ybarra, D. Lamas, A. Cabo, E. L. Dalibon and S. P. Brühl: Surf. Coat. Technol., 2017, vol. 313, pp. 47-54.10.1016/j.surfcoat.2017.01.037 ↗
53. A. Ollivier-Leduc, M.-L. Giorgi, D. Balloy and J.-B. Guillot: Corros. Sci., 2011, vol. 53, pp. 1375–1382.10.1016/j.corsci.2011.01.012 ↗
54. [54] Q.Bignon, F.Martin, Q. Auzoux, F.Miserque, M.Tabarant, L. Latu-Romain and Y.Wouters: Corros. Sci., 2019, vol. 150, pp.32–41.10.1016/j.corsci.2019.01.020 ↗
55. [55] J.Michler, M.Aeberhard, D.Velten, S.Winter, R.Payling and J.Breme: Thin Solid Films, 2004, vol. 447 –448, pp. 278–283.10.1016/S0040-6090(03)01105-2 ↗
56. [56] L. Pranevicius, S. Tuckute, K. Gedvilas and D.Milcius: Thin Solid Films, 2012, vol. 524, pp. 133–136.10.1016/j.tsf.2012.10.012 ↗
57. [57] S. Pour-Ali, M. Weiser, N. T. Nguyen, A.R. K.Rashid, A. Babakhani and S.Virtanen: Corros. Sci., 2020, vol. 163, 10828210.1016/j.corsci.2019.108282 ↗
58. [58] P. Bindu and S.Thomas: J. Theor. Appl. Phys, 2014, vol. 8, pp. 123-134.10.1007/s40094-014-0141-9 ↗
59. D. Tromans: Int. J. Res. Rev. Appl. Sci.,2011, vol.6, pp. 462-483.
60. K.L. Luthra: Oxid. Met., 1991, vol. 36, pp. 475–490.10.1007/BF01151593 ↗
61. [61]W. R. Tyson: Scr. Mater.,1969, vol. 3, pp. 917-922.
62. A. M. Chaze and C. Coddet, J. Le: Common Met., 1986, vol. 124, pp. 73 – 84.10.1016/0022-5088(86)90478-9 ↗
63. C. Schuman, T. E. Lenarduzzi, S. Weber, M.J. Philippe, D. Petelot and P. Bounie: Surf. Coat. Technol., 2006, vol. 200, pp. 4572 – 4578.10.1016/j.surfcoat.2005.03.035 ↗
64. T. Tsuji: J. Nucl. Mater.,1997, vol. 247, pp. 63-71.10.1016/S0022-3115(97)00064-0 ↗
65. L.Scotti, and A. Mottura: J. Chem. Phys., 20161, vol.44, pp. 084701(1)-084701(9).
66. [66] F. Omidbakhsh, and A. R. Ebrahimi: Rare Met.,2016, vol.35, pp. 149-153.10.1007/s12598-015-0452-2 ↗
67. [67]S. Andersson, B.Collen, U. Kuylenstierna and A. Magneli: Acta Chem Scand., 1957, vol. 11, pp. 1641-1652.10.3891/acta.chem.scand.11-1641 ↗
68. [68] S. Yamaguchi, K.Hiraga and M.Hirabayashi: J. Phys. Soc. Japan, 1970, vol. 28, pp. 1014-1023.10.1143/JPSJ.28.1014 ↗
69. [69] M.S. Blanter, E.B. Granovskiy and L.B. Magalas: Mater. Sci. Eng. A, 2004, vol. 370, pp. 88–92.10.1016/j.msea.2003.08.078 ↗