The Effect of Microstructure Morphology on Indentation Response of Ta/Ti Nanocomposite Thin Films
Source abstract
Abstract
We investigated the indentation response of Ta/Ti nanocomposite thin films with widely differing morphologies of the constituent phases, ranging from particulate to bicontinuously interpenetrating, but comparable characteristic dimensions of microstructure features. We find no influence of microstructure morphology on stiffness or hardness. However, we see a systematic dependence of indentation pileup height on microstructure morphology, with the largest pileups observed in composites with connected, Ta-rich networks and lowest for highly connected, Ti-rich networks. We attribute this dependence to an influence of microstructure morphology on strain hardening rates and propose mechanisms to explain it.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. 1 E. Ma: Scr. Mater., 2003, vol. 49, pp. 663–8.10.1016/S1359-6462(03)00396-8 ↗
2. 2 E. Ma: JOM, 2006, vol. 58, pp. 49–53.10.1007/s11837-006-0215-5 ↗
3. 3 E. Ma and T. Zhu: Mater. Today, 2017, vol. 20, pp. 323–31.10.1016/j.mattod.2017.02.003 ↗
4. 4 C.C. Koch, D.G. Morris, K. Lu, and A. Inoue: MRS Bull., 1999, vol. 24, pp. 54–8.10.1557/S0883769400051551 ↗
5. 5 C. Koch: Scr. Mater., 2003, vol. 49, pp. 657–62.10.1016/S1359-6462(03)00394-4 ↗
6. 6 Z.C. Cordero, B.E. Knight, and C.A. Schuh: Int. Mater. Rev., 2016, vol. 61, pp. 495–512.10.1080/09506608.2016.1191808 ↗
7. 7 I.J. Beyerlein, M.J. Demkowicz, A. Misra, and B.P. Uberuaga: Prog. Mater. Sci., 2015, vol. 74, pp. 125–210.10.1016/j.pmatsci.2015.02.001 ↗
8. 8 Y.-C. Wang, A. Misra, and R.G. Hoagland: Scr. Mater., 2006, vol. 54, pp. 1593–8.10.1016/j.scriptamat.2006.01.027 ↗
9. 9 T.J. Rupert and C.A. Schuh: Acta Mater., 2010, vol. 58, pp. 4137–48.10.1016/j.actamat.2010.04.005 ↗
10. 10 A. Misra and T. Ludovic: MRS Bull., 2010, vol. 35, pp. 965–77.
11. 11 E.M. Bringa, J.D. Monk, A. Caro, A. Misra, L. Zepeda-Ruiz, M. Duchaineau, F. Abraham, M. Nastasi, S.T. Picraux, Y.Q. Wang, and D. Farkas: Nano Lett., 2012, vol. 12, pp. 3351–5.10.1021/nl201383u ↗
12. 12 A. Misra, M.J. Demkowicz, X. Zhang, and R.G. Hoagland: JOM, 2007, vol. 59, pp. 62–5.10.1007/s11837-007-0120-6 ↗
13. 13 H.-J. Jin, J. Weissmüller, and D. Farkas: MRS Bull., 2018, vol. 43, pp. 35–42.10.1557/mrs.2017.302 ↗
14. 14 H.-J. Jin and J. Weissmüller: Adv. Eng. Mater., 2010, vol. 12, pp. 714–23.10.1002/adem.200900329 ↗
15. 15 M.J. Demkowicz: MRS Bull., 2019, vol. 44, pp. 25–30.10.1557/mrs.2018.322 ↗
16. 16 I. McCue and M.J. Demkowicz: JOM, 2017, vol. 69, pp. 2199–205.10.1007/s11837-017-2571-8 ↗
17. 17 J. Stuckner, K. Frei, I. McCue, M.J. Demkowicz, and M. Murayama: Comput. Mater. Sci., 2017, vol. 139, pp. 320–9.10.1016/j.commatsci.2017.08.012 ↗
18. 18 L.A. Giannuzzi, J.L. Drown, S.R. Brown, R.B. Irwin, and F.A. Stevie: Microsc. Res. Tech., 1998, vol. 41, pp. 285–90.10.1002/(SICI)1097-0029(19980515)41:4<285::AID-JEMT1>3.0.CO;2-Q ↗
19. 19 J.L. Bucaille, S. Stauss, E. Felder, and J. Michler: Acta Mater., 2003, vol. 51, pp. 1663–78.10.1016/S1359-6454(02)00568-2 ↗
20. 20 A. Bellou, C.T. Overman, H.M. Zbib, D.F. Bahr, and A. Misra: Scr. Mater., 2011, vol. 64, pp. 641–4.10.1016/j.scriptamat.2010.12.009 ↗
21. 21 D.S. Dugdale: J. Mech. Phys. Solids, 1954, vol. 2, pp. 265–77.10.1016/0022-5096(54)90017-4 ↗
22. Gnu Image and L. gimp. or. Manipulation Program
23. 23 A. V. Dobromyslov, G. V. Dolgikh, Y. Dutkevich, and T.L. Trenogina: Phys. Met. Metallogr., 2009, vol. 107, pp. 502–10.10.1134/S0031918X09050111 ↗
24. 24 K.A. Bywater and J.W. Christian: Philos. Mag., 1972, vol. 25, pp. 1249–73.10.1080/14786437208223852 ↗
25. 25 S.G. Corcoran, D. Wiesler, J. Barker, and K. Sieradzki: MRS Proc., 1994, vol. 376, p. 377.10.1557/PROC-376-377 ↗
26. 26 Y. Kwon, K. Thornton, and P.W. Voorhees: Phys. Rev. E, 2007, vol. 75, p. 021120.10.1103/PhysRevE.75.021120 ↗
27. 27 Q. Chen and K. Sieradzki: Nat. Mater., 2013, vol. 12, pp. 1102–6.10.1038/nmat3741 ↗
28. 28 J. Erlebacher: Phys. Rev. Lett., 2011, vol. 106, p. 225504.10.1103/PhysRevLett.106.225504 ↗
29. 29 I. McCue, J. Stuckner, M. Murayama, and M.J. Demkowicz: Sci. Rep., 2018, vol. 8, p. 6761.10.1038/s41598-018-25122-3 ↗
30. 30 H. Gao, C.-H. Chiu, and J. Lee: Int. J. Solids Struct., 1992, vol. 29, pp. 2471–92.10.1016/0020-7683(92)90004-D ↗
31. 31 J. Hay and B. Crawford: J. Mater. Res., 2011, vol. 26, pp. 727–38.10.1557/jmr.2011.8 ↗
32. 32 H. Li and J.J. Vlassak: J. Mater. Res., 2009, vol. 24, pp. 1114–26.10.1557/jmr.2009.0144 ↗
33. 33 Z. Hashin and S. Shtrikman: J. Mech. Phys. Solids, 1963, vol. 11, pp. 127–40.10.1016/0022-5096(63)90060-7 ↗
34. 34 I. McCue, B. Gaskey, B. Crawford, and J. Erlebacher: Appl. Phys. Lett., 2016, vol. 109, p. 231901.10.1063/1.4971776 ↗
35. 35 A. Misra, J.P. Hirth, and R.G. Hoagland: Acta Mater., 2005, vol. 53, pp. 4817–24.10.1016/j.actamat.2005.06.025 ↗
36. 36 J.A. El-Awady: Nat. Commun., 2015, vol. 6, p. 5926.10.1038/ncomms6926 ↗
37. M.F. Ashby: Philos. Mag. A, 1970, vol. 21, pp. 399–424.
38. 38 A. Bolshakov and G.M. Pharr: J. Mater. Res., 1998, vol. 13, pp. 1049–58.10.1557/JMR.1998.0146 ↗
39. 39 L. Lin, L. Delaey, O. Van Der Biest, and P. Wollants: Scr. Mater., 1996, vol. 34, pp. 1411–6.10.1016/1359-6462(96)00006-1 ↗
40. 40 S. Torquato: Random Heterogeneous Materials, vol. 16, Springer New York, New York, NY, 2002.10.1007/978-1-4757-6355-3 ↗
41. 41 A. Fartash, E.E. Fullerton, I.K. Schuller, S.E. Bobbin, J.W. Wagner, R.C. Cammarata, S. Kumar, and M. Grimsditch: Phys. Rev. B, 1991, vol. 44, pp. 13760–3.10.1103/PhysRevB.44.13760 ↗
42. 42 J.A. Bell, W.R. Bennett, R. Zanoni, G.I. Stegeman, C.M. Falco, and C.T. Seaton: Solid State Commun., 1987, vol. 64, pp. 1339–42.10.1016/0038-1098(87)90388-7 ↗
43. 43 A. Kueny, M. Grimsditch, K. Miyano, I. Banerjee, C.M. Falco, and I.K. Schuller: Phys. Rev. Lett., 1982, vol. 48, pp. 166–70.10.1103/PhysRevLett.48.166 ↗
44. 44 S.A. Skirlo and M.J. Demkowicz: Appl. Phys. Lett., 2013, vol. 103, p. 171908.10.1063/1.4827103 ↗
45. 45 K.J. Hemker and W.D. Nix: Nat. Mater., 2008, vol. 7, pp. 97–8.10.1038/nmat2103 ↗
46. 46 W.D. Nix, J.R. Greer, G. Feng, and E.T. Lilleodden: Thin Solid Films, 2007, vol. 515, pp. 3152–7.10.1016/j.tsf.2006.01.030 ↗
47. A.F. Bower, N.A. Fleck, A. Needleman, and N. Ogbonna: Proc. R. Soc. A, 1993, vol. 441, pp. 97–124.
48. D. Tabor: Proc. R. Soc. A, 1948, vol. 192, pp. 247–74.
49. 49 D. Tabor: Rev. Phys. Technol., 1970, vol. 1, pp. 145–79.10.1088/0034-6683/1/3/I01 ↗
50. 50 Y. Cui, B. Derby, N. Li, N.A. Mara, and A. Misra: Mater. Res. Lett., 2018, vol. 6, pp. 184–90.10.1080/21663831.2018.1431315 ↗
51. F.F. Csikor, C. Motz, D. Weygand, M. Zaiser, and S. Zapperi: Science, 2007, vol. 318, pp. 251–4.10.1126/science.1143719 ↗
52. A. Argon: Strengthening Mechanisms in Crystal Plasticity, Oxford University Press, Oxford, 2007.10.1093/acprof:oso/9780198516002.001.0001 ↗
53. 53 S.H. Oh, M. Legros, D. Kiener, and G. Dehm: Nat. Mater., 2009, vol. 8, pp. 95–100.10.1038/nmat2370 ↗
54. 54 F. Sansoz, K. Lu, T. Zhu, and A. Misra: MRS Bull., 2016, vol. 41, pp. 292–7.10.1557/mrs.2016.60 ↗
55. I.A. Ovidko, R.Z. Valiev, and Y.T. Zhu: Prog. Mater. Sci., 2018, vol. 94, pp. 462–540.10.1016/j.pmatsci.2018.02.002 ↗
56. 56 A.D. Rollett and U.F. Kocks: Solid State Phenom., 1993, vol. 35–36, pp. 1–18.10.4028/www.scientific.net/SSP.35-36.1 ↗
57. 57 N.A. Mara, D. Bhattacharyya, J.P. Hirth, P. Dickerson, and A. Misra: Appl. Phys. Lett., 2010, vol. 97, p. 021909.10.1063/1.3458000 ↗
58. 58 Y.Y. Lu, R. Kotoka, J.P. Ligda, B.B. Cao, S.N. Yarmolenko, B.E. Schuster, and Q. Wei: Acta Mater., 2014, vol. 63, pp. 216–31.10.1016/j.actamat.2013.10.032 ↗
59. 59 A. Junkaew, B. Ham, X. Zhang, and R. Arróyave: Comput. Mater. Sci., 2015, vol. 108, pp. 212–25.10.1016/j.commatsci.2015.07.003 ↗
60. 60 E. Frutos, M. Callisti, M. Karlik, and T. Polcar: Mater. Sci. Eng. A, 2015, vol. 632, pp. 137–46.10.1016/j.msea.2015.02.071 ↗
61. 61 B. Derby, Y. Cui, J.K. Baldwin, and A. Misra: Thin Solid Films, 2018, vol. 647, pp. 50–6.10.1016/j.tsf.2017.12.013 ↗
62. 62 F.T.N. Vüllers and R. Spolenak: Acta Mater., 2015, vol. 99, pp. 213–27.10.1016/j.actamat.2015.07.050 ↗
63. 63 I. McCue, S. Ryan, K. Hemker, X. Xu, N. Li, M. Chen, and J. Erlebacher: Adv. Eng. Mater., 2016, vol. 18, pp. 46–50.10.1002/adem.201500219 ↗
64. 64 M. Ortiz, Y. Leroy, and A. Needleman: Comput. Methods Appl. Mech. Eng., 1987, vol. 61, pp. 189–214.10.1016/0045-7825(87)90004-1 ↗
65. 65 A. Needleman: J. Appl. Mech., 1987, vol. 54, p. 525.10.1115/1.3173064 ↗
66. 66 J. Pan, M. Saje, and A. Needleman: Int. J. Fract., 1983, vol. 21, pp. 261–78.10.1007/BF00942345 ↗
67. 67 V. Tvergaard and A. Needleman: Acta Metall., 1984, vol. 32, pp. 157–69.10.1016/0001-6160(84)90213-X ↗
68. K. SitaramaRaju, V. SubramanyaSarma, A. Kauffmann, Z. Hegedűs, J. Gubicza, M. Peterlechner, J. Freudenberger, and G. Wilde: Acta Mater., 2013, vol. 61, pp. 228–38.10.1016/j.actamat.2012.09.053 ↗
69. 69 Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–5.10.1038/nature01133 ↗
70. 70 X. Wu, M. Yang, F. Yuan, G. Wu, Y. Wei, X. Huang, and Y. Zhu: Proc. Natl. Acad. Sci., 2015, vol. 112, pp. 14501–5.10.1073/pnas.1517193112 ↗
71. 71 X. Wu and Y. Zhu: Mater. Res. Lett., 2017, vol. 5, pp. 527–32.10.1080/21663831.2017.1343208 ↗
72. 72 Y. Zhu, R.Z. Valiev, T.G. Langdon, N. Tsuji, and K. Lu: MRS Bull., 2010, vol. 35, pp. 977–81.10.1557/mrs2010.702 ↗
73. 73 C. Fan, R.T. Ott, and T.C. Hufnagel: Appl. Phys. Lett., 2002, vol. 81, pp. 1020–2.10.1063/1.1498864 ↗
74. 74 D.C. Hofmann, J.-Y. Suh, A. Wiest, G. Duan, M.-L. Lind, M.D. Demetriou, and W.L. Johnson: Nature, 2008, vol. 451, pp. 1085–9.10.1038/nature06598 ↗