journal article·2020-08

Low-Temperature Nitrocarburizing of Austenitic Stainless Steel for Combat Corrosion in H2S Environments

Longyi Li, Jun Wang, Zhenghua Tang, Jing Yan, Hongyuan Fan, Bo Zeng, Xiaoying Li, Hanshan Dong

Publisher page

Abstract

The time-dependent experiment was performed to investigate the corrosion behavior of low-temperature liquid nitrocarburized (LNC) 304 austenitic stainless steel in wet H2S environments. Characteristics of H2S corrosion products, as well as localized corrosion behavior, were investigated using X-ray diffraction (XRD), scanning electron microscopy, X-ray photoelectron spectroscopy (XPS), and optical profilometry. The results revealed that the untreated steels, of which the H2S corrosion product layer on the untreated surface thickened but displayed a layered defect structure as the corrosion proceeded, had a higher weight loss than the LNC. Energy-dispersive spectroscopy (EDS) served to reveal the relationship between corrosion behavior and the content of sulfur, chromium, and other elements, and the valences of these elements were illustrated by XPS. The surface morphology after removing corrosion products showed that the presence of nitrocarburized S phase could prevent general corrosion and inhibit pit propagation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Z. Wang, L. Zhang, X. Tang, Z. Zhang, and M. Lu: Appl. Surf. Sci., 2017, vol. 423, pp. 457–64.10.1016/j.apsusc.2017.06.214 ↗
2. J. Ding, L. Zhang, M. Lu, J. Wang, Z. Wen, and W. Hao: Appl. Surf. Sci., 2014, vol. 289, pp. 33–41.10.1016/j.apsusc.2013.10.080 ↗
3. P. Wang, J. Wang, S. Zheng, Y. Qi, M. Xiong, and Y. Zheng: Int. J. Hydr. Energy, 2015, vol. 40, pp. 11925–11930.10.1016/j.ijhydene.2015.04.114 ↗
4. L. Zeng, X.P. Guo, and G.A. Zhang: J. Alloy Compd., 2017, vol. 724, pp. 827–40.10.1016/j.jallcom.2017.07.083 ↗
5. E. Heitz: Electrochim. Acta, 1996, vol. 41, pp. 503–09.10.1016/0013-4686(95)00336-3 ↗
6. X. Hu and A. Neville: Wear, 2009, vol. 267, pp. 2027–32.10.1016/j.wear.2009.07.023 ↗
7. J. Aguirre, M. Walczak, and M. Rohwerder: Wear, 2019, vols. 438–439, 203053.10.1016/j.wear.2019.203053 ↗
8. X. Zhang, J. Wang, H. Fan, J. Yan, L. Duan, and T. Gu: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 1–12.
9. E. Araújo, R. Bandeira, M. Manfrinato, J. Moreto, R. Borges, S. Vales, P. Suzuki, and L. Rossino: J. Mater. Res. Technol., 2019, vol. 8, pp. 2180–91.10.1016/j.jmrt.2019.02.006 ↗
10. J. Wang, Z. Li, D. Wang, S. Qiu, and F. Ernst: Acta Mater., 2017, vol. 128, pp. 235–40.10.1016/j.actamat.2017.02.018 ↗
11. D. Wu, H. Kahn, J.C. Dalton, G.M. Michal, F. Ernst, and A.H. Heuer: Acta Mater., 2014, vol. 79, pp. 339–50.10.1016/j.actamat.2014.07.007 ↗
12. Y. Sun and T. Bell: Tribol. Lett., 2002, vol. 13, pp. 29–34.10.1023/A:1016555719845 ↗
13. Y. Peng, C. Chen, X. Li, J. Gong, Y. Jiang, and Z. Liu: Surf. Coat. Technol., 2017, vol. 328, pp. 420–27.10.1016/j.surfcoat.2017.08.058 ↗
14. X. Li, W. Dou, L. Tian, and H. Dong: Lubricants, 2018. doi:10.3390/lubricants604009310.3390/lubricants6040093 ↗
15. G. Pintaude, A. Rovani, J. Das, L. Lagoeiro, X. Li, and H. Dong: J. Mater. Eng. Perform., 2019, vol. 28, pp. 3673–82.10.1007/s11665-019-04114-y ↗
16. X. Zhang, J. Wang, H. Fan, and D. Pan: Appl. Surf. Sci., 2018, vol. 440, pp. 755–62.10.1016/j.apsusc.2018.01.225 ↗
17. P. Wang, Z. Lv, S. Zheng, Y. Qi, J. Wang, and Y. Zheng: Int. J. Hydr. Energy, 2015, vol. 40, pp. 11514–11521.10.1016/j.ijhydene.2015.02.051 ↗
18. W. Li, X. Zhu, C. Wang, and X. Jin: Mater. Today, 2015, vol. 2, pp. S691–S695.10.1016/j.matpr.2015.07.377 ↗
19. X. Xu, L. Wang, Z. Yu, J. Qiang, and Z. Hei: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1193–99.10.1007/s11661-000-0115-1 ↗
20. J. Wang, Y. Lin, and Q. Zhang: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4525–34.10.1007/s11661-014-2418-7 ↗
21. M. Zhao, Y. Shan, R. Fu, Y. Ke, and H. Yu: Mater. Lett., 2002, vol. 57, pp. 141–45.10.1016/S0167-577X(02)00720-6 ↗
22. J. Wang, Y. Lin, M. Li, H. Fan, D. Zeng, and J. Xiong: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 1010–16.10.1007/s11663-013-9841-9 ↗
23. R. Huang, J. Wang, S. Zhong, M. Li, J. Xiong, and H. Fan: Appl. Surf. Sci., 2013, vol. 271, pp. 93–97.10.1016/j.apsusc.2013.01.111 ↗
24. G. Chen, J. Wang, H. Fan, D. Wang, X. Li, and H. Dong: J. Alloy Compd., 2019, vol. 776, pp. 702–11.10.1016/j.jallcom.2018.10.298 ↗
25. L. Li, J. Wang, J. Yan, L. Duan, X. Li, and H. Dong: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 6521–32.10.1007/s11661-018-4920-9 ↗
26. J. Wang, Y. Lin, J. Yan, D. Zen, Q. Zhang, and R. Huang: Surf. Coat. Technol., 2012, vol. 206, pp. 3399–3404.10.1016/j.surfcoat.2012.01.063 ↗
27. K. Deng, Y. Lin, H. Ning, W. Liu, A. Singh, and G. Zhang: Appl. Geochem., 2018, vol. 99, pp. 22–30.10.1016/j.apgeochem.2018.10.013 ↗
28. A. Groysman: Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry, 1st ed., Springer International Publishing AG, Cham, Switzerland, 2017.10.1007/978-3-319-45256-2 ↗
29. Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens, ASTM, West Conshohocken, PA, 2003.
30. P. Tewari, M. Bailey, and A. Campbell: Corros. Sci., 1979, vol. 19, pp. 573–85.10.1016/S0010-938X(79)80060-8 ↗
31. M. Alizadeh and S. Bordbar: Corros. Sci., 2013, vol. 70, pp. 170–09.10.1016/j.corsci.2013.01.026 ↗
32. D. Rickard and G. Luther: ChemInform, 2007, vol. 38, pp. 514–62.10.1002/chin.200719200 ↗
33. J. Sardisco, W. Wright, and E. Greco: Corrosion, 1963, vol. 19, pp. 354–59.10.5006/0010-9312-19.10.354 ↗
34. P. Tewari and A. Campbell: Can. J. Chem., 1979, vol. 57, pp. 188–96.10.1139/v79-031 ↗
35. H. Dong: Int. Mater. Rev., 2010, vol. 55, pp. 65–98.10.1179/095066009X12572530170589 ↗
36. W. Hao, L. Zhang, and H. Li: Paper No. 11293, NACE International, Houston, TX, 2011.
37. L. Zhang, H. Li, and F. Shi: Int. J. Min. Met. Mater., 2017, vol. 24, pp. 401–09.10.1007/s12613-017-1420-7 ↗
38. P. Bai, S. Zheng, and C. Chen: Mater. Chem. Phys., 2015, vols. 149–150, pp. 295–301.10.1016/j.matchemphys.2014.10.020 ↗
39. Z. Wang, L. Zhang, Z. Zhang, and M. Lu: Appl. Surf. Sci., 2018, vol. 458, pp. 686–99.10.1016/j.apsusc.2018.07.122 ↗
40. D. Macdonald, S. Biaggio, and H. Song: J. Electrochem. Soc., 1992, vol. 139, pp. 170–76.10.1149/1.2069165 ↗
41. X. Liu, P. Okafor, and Y. Zheng: Corros. Sci., 2009, vol. 51, pp. 744–51.10.1016/j.corsci.2008.12.024 ↗
42. Z. Iofa and V. Batrakov: Electrochim. Acta, 1964, vol. 9, pp. 1645–53.10.1016/0013-4686(64)80091-8 ↗
43. R. King, J. Miller, and J. Smith: Br. Corros. J., 1973, vol. 8, pp. 137–41.10.1179/000705973798322251 ↗
44. W. Fredriksson, S. Malmgren, T. Gustafsson, M. Gorgoi, and K. Edstr: Appl. Surf. Sci., 2012, vol. 258, pp. 5790–97.10.1016/j.apsusc.2012.02.099 ↗
45. A. Laszczyńska, W. Tylus, J. Winiarski, and I. Szczygieł: Surf. Coat. Technol., 2017, vol. 317, pp. 26–37.10.1016/j.surfcoat.2017.03.043 ↗
46. G. Myburg, K. Varga, W.O. Barnard, P. Baradlai, L. Tomcsányi, J.H. Potgieter, C.W. Louw, and M.J. van Staden: Appl. Surf. Sci., 1998, vol. 136, pp. 29–35.10.1016/S0169-4332(98)00326-2 ↗
47. L. Zeng, X.P. Guo, G.A. Zhang, and H.X. Chen: Corros. Sci., 2018, vol. 144, pp. 258–65.10.1016/j.corsci.2018.08.045 ↗
48. J.E. Castle: J. Electrochem. Soc., 1990, vol. 137, p. 2031.10.1149/1.2086860 ↗
49. H.W. Nesbitt, D. Legrand, and G.M. Bancroft: Phys. Chem. Miner., 2000, vol. 27, pp. 357–66.10.1007/s002690050265 ↗
50. H. Feng, Z. Jiang, H. Li, P. Lu, S. Zhang, H. Zhu, B. Zhang, T. Zhang, D. Xu, and Z. Chen: Corros. Sci., 2018, vol. 144, pp. 288–300.10.1016/j.corsci.2018.09.002 ↗
51. S. Ningshen, U. KamachiMudali, V.K. Mittal, and H.S. Khatak: Corros. Sci., 2007, vol. 49, pp. 481–96.10.1016/j.corsci.2006.05.041 ↗
52. M. Monnot, R.P. Nogueira, V. Roche, G. Berthomé, E. Chauveau, R. Estevez, and M. Mantel: Appl. Surf. Sci., 2017, vol. 394, pp. 132–41.10.1016/j.apsusc.2016.10.072 ↗
53. M.B. Kermani and A. Morshed: Corrosion, 2003, vol. 59, pp. 659–83.10.5006/1.3277596 ↗
54. G. Schmidt: Advance in CO2 Corrosion, vol. 1, NACE, Houston, TX, 1984, pp. 1–2.
55. A. Jarrah, M. Bigerelle, G. Guillemot, D. Najjar, A. Iost, and J.-M. Nianga: Corros. Sci., 2011, vol. 53, pp. 2453–67.10.1016/j.corsci.2011.03.026 ↗
56. L. Organ, J.R. Scully, A.S. Mikhailov, and J.L. Hudson: Electrochim. Acta, 2005, vol. 51, pp. 225–41.10.1016/j.electacta.2005.04.018 ↗
57. P. Marcus, V. Maurice, and H. Strehblow: Corros. Sci., 2008, vol. 50, pp. 2698–2704.10.1016/j.corsci.2008.06.047 ↗
58. J. Soltis: Corros. Sci., 2015, vol. 90, pp. 5–22.10.1016/j.corsci.2014.10.006 ↗
59. P. Bai, H. Zhao, S. Zheng, and C. Chen: Corros. Sci., 2015, vol. 93, pp. 109–19.10.1016/j.corsci.2015.01.024 ↗
60. R. Wei, X. Chen, Z. Ai, and Y. Jin: Int. J. Hydrogen Energy, 2018, vol. 43, pp. 9059–67.10.1016/j.ijhydene.2018.03.119 ↗