journal article·2020-04

Role of the V-Notch Location in the Impact Toughness of 9 Pct Cr-CrMoV Dissimilar Welded Joints

Kai Ding, Bingge Zhao, Xin Huo, Manjie Fan, Xiaohong Li, Yuanheng Zhang, Tao Wei, Guanzhi Wu, Yulai Gao

Publisher page

Abstract

The location of the V-notch in a weld metal (WM) can have a significant influence on the impact toughness of a 9 weight percent (9 pct) Cr-CrMoV dissimilar welded joint. The specimens with the V-notch at position I, which was parallel to the filling direction, presented small fluctuations in the impact toughness, while relatively larger fluctuations occurred in the specimens with the V-notches parallel to the welding direction (position II). Several equiaxed grain zones favorable to hindering the crack propagation could ensure less fluctuation in the impact toughness. In contrast, the columnar and equiaxed grain zones could be clearly distinguished in the specimens with the V-notches at position II. The differences in the crack propagation paths and tip locations of the V-notches are regarded as the main factors causing the fluctuations in the impact toughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. M.L. Zhu and F.Z. Xuan, Mater. Des., 2010, vol. 31 pp. 3346-52.10.1016/j.matdes.2010.01.055 ↗
2. H.T. Wang, G.Z. Wang, F.Z. Xuan and S.T. Tu, Eng. Fail. Anal., 2013, vol. 28 pp. 134-48.10.1016/j.engfailanal.2012.10.005 ↗
3. X. Yu, Y.C. Lim, R. Smith, S.S. Badu, D.F. Farson, J.C. Lippold and S. Mccracken, Mater. Sci. Tech., 2014, vol. 30 pp. 930-37.10.1179/1743284713Y.0000000358 ↗
4. A.H. Saedi, E. Hajjari and S.M. Sadrossadat, Metall. Mater. Trans. A, 2018, vol. 49 pp. 5497-508.10.1007/s11661-018-4890-y ↗
5. K. Ding, S.F. Qiao, S.P. Liu, B.G. Zhao, X. Huo, X.H. Li and Y.L. Gao, Metall. Mater. Trans. A, 2019, vol. 50 pp. 4652-64.10.1007/s11661-019-05372-0 ↗
6. A. Joseph, S.K. Rai, T. Jayakumar and N. Murugan, Int. J. Pres. Ves. Pip., 2005, vol. 82 pp. 700-05.10.1016/j.ijpvp.2005.03.006 ↗
7. X.L. Deng, F.G. Lu, H.C. Cui, X.H. Tang and Z.G. Li, Mater. Sci. Eng. A, 2016, vol. 651 pp. 1018-30.10.1016/j.msea.2015.11.081 ↗
8. D.H. Meng, F.G. Lu, H.C. Cui, Y.M. Ding, X.H. Tang and X. Huo, J. Mater. Res., 2015, vol. 30 pp. 197-205.10.1557/jmr.2014.366 ↗
9. B.T. Alexandrov, J.C. Lippold, J.W. Sowards, A.T. Hope and D.R. Saltzmann, Weld. World, 2013, vol. 57 pp. 39-53.10.1007/s40194-012-0007-1 ↗
10. G. Cam, S. Erim, C. Yeni and M. Kocak, Weld. J., 1999, vol. 78 pp. 193 s-201 s.
11. G. Cam, C. Yeni, S. Erim, V. Ventzke and M. Kocak, Sci. Technol. Weld. Joing, 1998, vol. 3 pp. 177-89.10.1179/stw.1998.3.4.177 ↗
12. G. Cam, M. Kocak and J.F.D. Santos, Weld. World, 1999, vol. 43 pp. 13-26.
13. J.F.D. Santos, G. Cam, F. Torster, A. Insfran, S. Riekehr, V. Ventzke and M. Kocak, Weld. World, 2000, vol. 44 pp. 42-64.
14. K. Ding, P. Wang, X. Liu, X.H. Li, B.G. Zhao and Y.L. Gao, J. Mater. Eng. Perform., 2018, vol. 27 pp. 6027-39.10.1007/s11665-018-3668-0 ↗
15. H. Shahhosseini and M. Alishahi, Mater. Lett., 2012, vol. 67 pp. 259-62.10.1016/j.matlet.2011.09.066 ↗
16. J. Hou, Q.J. Peng, Y. Takeda, J. Kuniya, T. Shoji, J.Q. Wang, E.H. Han and W. Ke, J. Mater. Sci., 2010, vol. 45 pp. 5332-38.10.1007/s10853-010-4581-6 ↗
17. P. Liu, F.G. Lu, X. Liu, H.J. Ji and Y.L. Gao, J. Alloys Compd., 2014, vol. 584 pp. 430-37.10.1016/j.jallcom.2013.09.048 ↗
18. R. Santosh, G. Das, S. Kumar, P.K. Singh and M. Ghosh, Metall. Mater. Trans. A, 2018, vol. 49 pp. 2099-112.10.1007/s11661-018-4554-y ↗
19. X.F. Wang, C.D. Shao, X. Liu and F.G. Lu, J. Mater. Sci. Technol., 2018, vol. 34 pp. 720-31.10.1016/j.jmst.2017.06.015 ↗
20. C.D. Shao, F.G. Lu, H.C. Cui and Z.G. Li, International Journal of Fatigue, 2018, vol. 113 pp. 1-10.10.1016/j.ijfatigue.2018.03.029 ↗
21. Q.L. Cui, D. Parkes, D. Westerbaan, S.S. Nayak, Y. Zhou, D.C. Saha, D. Liu, F. Goodwin, S. Bhole and D.L. Chen, J. Mater. Eng. Perform., 2017, vol. 26 pp. 783-91.10.1007/s11665-016-2454-0 ↗
22. K. Ding, T. Wei, M.J. Fan, Y.H. Zhang, G.Z. Wu, Y.B. Zhang, Y. He, B.G. Zhao and Y.L. Gao, Mater. Lett., 2019, https://doi.org/10.1016/j.matlet.2019.126978.10.1016/j.matlet.2019.126978 ↗
23. J. Cermak and L. Kral, Mater. Lett., 2014, vol. 116 pp. 402-04.10.1016/j.matlet.2013.11.085 ↗
24. A. Kulkarni, D.K. Dwivedi and M. Vasudevan, Mater. Sci. Eng. A, 2018, vol. 731 pp. 309-23.10.1016/j.msea.2018.06.054 ↗
25. Y.Y. You, R.K. Shiue, R.H. Shiue and C. Chen, J. Mater. Sci. Lett., 2001, vol. 20 pp. 1429-32.10.1023/A:1011616232396 ↗
26. K. Laha, S. Latha, K.B.S. Rao, S.L. Mannan and D.H. Sastry, Mater. Sci. Tech., 2001, vol. 17 pp. 1265-72.10.1179/026708301101509188 ↗
27. Q.J. Wu, F.G. Lu, H.C. Cui, X. Liu, P. Wang and Y.L. Gao, Mater. Lett., 2015, vol. 141 pp. 242-44.10.1016/j.matlet.2014.08.158 ↗
28. Q. Guo, F.G. Lu, X. Liu, R.J. Yang, H.C. Cui and Y.L. Gao, Mater. Sci. Eng. A, 2015, vol. 638 pp. 240-50.10.1016/j.msea.2015.04.011 ↗
29. W. Liu, X. Liu, F.G. Lu, X.H. Tang, H.C. Cui and Y.L. Gao, Mater. Sci. Eng. A, 2015, vol. 644 pp. 337-46.10.1016/j.msea.2015.07.068 ↗
30. R. Mittal and B.S. Sidhu, J. Mater. Process. Tech., 2015, vol. 220 pp. 76-86.10.1016/j.jmatprotec.2015.01.008 ↗
31. J. Akram, P.R. Kalvala, M. Misra and I. Charit, Mater. Sci. Eng. A, 2017, vol. 688 pp. 396-406.10.1016/j.msea.2017.02.026 ↗
32. V.D. Vijayanand, S.D. Yadav, P. Parameswaran, K. Laha, P.K. Parida and G.V.P. Reddy, Metall. Mater. Trans. A, 2018, vol. 49 pp. 4409-12.10.1007/s11661-018-4805-y ↗
33. K. Ding, H.J. Ji, Q.L. Zhang, X. Liu, P. Wang, X.H. Li, L. Zhang and Y.L. Gao, J. Iron Steel Res. Int., 2018, vol. 25 pp. 839-46.10.1007/s42243-018-0121-4 ↗
34. K. Ding, H.J. Ji, X. Liu, P. Wang, Q.L. Zhang, X.H. Li and Y.L. Gao, J. Iron Steel Res. Int., 2018, vol. 25 pp. 847-53.10.1007/s42243-018-0124-1 ↗
35. W. Liu, F.G. Lu, Y.H. Wei, Y.M. Ding, P. Wang and X.H. Tang, Mater. Des., 2016, vol. 108 pp. 195-206.10.1016/j.matdes.2016.06.102 ↗
36. H.H. Wang, H.Q. Zhang and J.F. Li, J. Mater. Process. Tech., 2009, vol. 209 pp. 2803-11.10.1016/j.jmatprotec.2008.06.035 ↗
37. R.Q. Lin, H.C. Cui, F.G. Lu, X. Huo and P. Wang, J. Mater. Res., 2016, vol. 31 pp. 3597-609.10.1557/jmr.2016.381 ↗
38. X. Liu, Z.P. Cai, X.L. Deng and F.G. Lu, J. Mater. Res., 2017, vol. 32 pp. 3117-27.10.1557/jmr.2017.222 ↗
39. H.G. Armaki, R. Chen, K. Maruyama and M. Igarashi, Metall. Mater. Trans. A, 2011, vol. 42 pp. 3084-94.10.1007/s11661-011-0726-8 ↗
40. M. Taneike, K. Sawada and F. Abe, Metall. Mater. Trans. A, 2004, vol. 35 pp. 1255-62.10.1007/s11661-004-0299-x ↗
41. Z. Qu and C.J. Mcmahon, Metall. Mater. Trans. A, 1983, vol. 14 pp. 1101-08.10.1007/BF02670448 ↗
42. F.F. Chen, W. Wang, K. Wang, P.F. Ho, H. Li, X. Huang and W.J. Chen, Mater. Sci. Tech., 2018, vol. 34 pp. 1441-46.10.1080/02670836.2018.1459353 ↗
43. M. Divya, C.R. Das, S. Mahadevan, S.K. Albert, R. Pandian, S.K. Kar, A.K. Bhaduri and T. Jayakumar, Metall. Mater. Trans. A, 2015, vol. 46 pp. 2554-67.10.1007/s11661-015-2847-y ↗
44. Q.J. Wu, F.G. Lu, H.C. Cui, Y.M. Ding, X. Liu and Y.L. Gao, Mater. Sci. Eng. A, 2014, vol. 615 pp. 98-106.10.1016/j.msea.2014.07.067 ↗
45. R. Chandel, R.F. Orr, J.A. Gianetto, J.T. Mcgrath and R.F. Knight, J. Mater. Energy Sys., 1985, vol. 7 pp. 137-46.10.1007/BF02833559 ↗
46. B. Garbarz and B.N. Harańczyk, Mater. Sci. Tech., 2015, vol. 31 pp. 773-80.10.1179/1743284714Y.0000000675 ↗
47. E. Maina, D.N. Crowther, J.R. Banerjee and B. Mintz, Mater. Sci. Tech., 2012, vol. 28 pp. 390-96.10.1179/1743284711Y.0000000061 ↗
48. R.K. Shiue, K.C. Lan and C. Chen, Mater. Sci. Eng. A, 2000, vol. 287 pp. 10-16.10.1016/S0921-5093(00)00831-5 ↗
49. F.G. Lu, P. Liu, H.J. Ji, Y.M. Ding, X.J. Xu and Y.L. Gao, Mater. Charact., 2014, vol. 92 pp. 149-58.10.1016/j.matchar.2014.03.014 ↗
50. P.Y. Wang, Z.G. Lv, S.Q. Zheng, Y.M. Qi, J. Wang and Y.J. Zheng, Int. J. Hydrogen Energ., 2015, vol. 40 pp. 11514-21.10.1016/j.ijhydene.2015.02.051 ↗
51. W. Wang, T.G. Liu, X.Y. Cao, Y.H. Lu and T. Shoji, Mater. Sci. Eng. A, 2018, vol. 729 pp. 331-39.10.1016/j.msea.2018.05.077 ↗
52. C.A. Huang, T.H. Wang, Y.Z. Cahang, W.C. Han and C.H. Lee, Sci. Technol. Weld. Joi., 2008, vol. 13 pp. 646-55.10.1179/174329307X236823 ↗