journal article·2020-01

Lifetime and Damage Characterization of Compacted Graphite Iron During Thermo-mechanical Fatigue Under Varying Constraint Conditions

Edwin A. Lopez-Covaleda, Sepideh Ghodrat, Leo A. I. Kestens

Publisher page

Abstract

The cylinder head of heavy-duty fuel engines, made of compacted graphite iron, is sensitive to cracking as a result of a phenomenon called Thermo-Mechanical Fatigue (TMF) induced by subsequent start-up and shut-down cycles of the engine. Under laboratory conditions, various test setups were applied to reproduce the TMF behavior of the valve bridge areas, which are specifically prone to TMF. In these laboratory tests, various mechanical boundary conditions were applied including single and double constraints at low and high temperatures. The TMF lifetime is satisfactorily modeled based on the Paris Crack Growth Law. The reason why the law can accurately simulate the lifetime is due to the fact that this law allows for a description whereby plastically induced damage is gradually built up cycle by cycle, which eventually is reflected in the Cp parameter of the Paris equation. It was proven that the description is valid under partial constraint, full constraint, and over-constraint boundary conditions and even with varying constraint conditions at high and low temperature. Post-processing of the Paris Law model allowed defining an equivalent constraint value γ′, which is a single constraint that yields an identical lifetime as the experiment with double constraint at low and high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Mechanical Failure Analysis and Simulation · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. ASM: in Metals HandBook—Fatigue and Fracture, ASM, eds., 1996 ed., 2005, p. 2592.
2. R.G. Budynas, J.K. Nisbett, and J.E. Shigley: Mechanical Engineering Design, McGraw-Gill Interamericana, 2008.
3. D. F. M. GmbH, J. Eng. Gas Turbines Power, 2008, vol. 130, p. 10.
4. S. Dawson: China Foundry, 2009, vol. 241, p. 6.
5. S. Dawson: Compacted Graphite Iron: Mechanical and Physical Properties for Engine Design, Materials in Powertrain VDI, Dresden, 1999, vol. 1.
6. M. B. Grieb, H.-J. Christ, and B. Plege, Proc. Eng., 2010, vol. 2, pp. 1767–76.10.1016/j.proeng.2010.03.190 ↗
7. N. Collin: Master of Science, Industrial Engineering and Management, 2014, KTH, Stockholm.
8. V. Norman, P. Skoglund, D. Leidermark, and J. Moverare, Int. J. Fatigue, 2016, vol. 88, pp. 121-131.10.1016/j.ijfatigue.2016.03.020 ↗
9. M. Riedler, H. Leitner, B. Prillhofer, G. Winter, and W. Eichlseder, Meccanica,2007, vol. 42, pp. 47-59.10.1007/s11012-006-9020-z ↗
10. G. Pusch et al.: in Recent Trends in Fracture and Damage Mechanics, G. Hütter and L. Zybell, eds., Springer International Publishing, Cham, 2016, pp. 159–96.
11. S. Ghodrat: Ph.D. Dissertation, Materials Science and Engineering, Delft University of Technology, Delft, The Netherlands, 2013.
12. M. J. Dong, C. Prioul, and D. François, Metall and Mat Trans A,1997, vol. 28, pp. 2255-2262.10.1007/s11661-997-0183-6 ↗
13. M.C. Mattias Lundberg, R.L. Peng: Presented at the 13th International Conference on Fracture, Beijing, China, 2013.
14. S. Ghodrat, A. C. Riemslag, M. Janssen, J. Sietsma, and L. A. I. Kestens, Int. J. Fatigue,2013, vol. 48, pp. 319-329.10.1016/j.ijfatigue.2012.11.014 ↗
15. A. Riemslag, JTEVA,1994, vol. 22, pp. 410-419.
16. A. Kalra: Master of Science, 3Mi, 2016, Delft University of Technology, Delft.
17. X. Wu, G. Quan, R. MacNeil, Z. Zhang, X. Liu, and C. Sloss, Metall and Mat Trans A,2015, vol. 46, pp. 2530-2543.10.1007/s11661-015-2873-9 ↗
18. C.G. Csaba Halászi, H. Dannbauer: MAGNA Powertrain, 2007, p. 14.
19. H. J. Christ, Procedia Engineering,2013, vol. 55, pp. 181-190.10.1016/j.proeng.2013.03.240 ↗
20. G.H.S.S. Manson, and M. Hirschberg: Presented at the Symposium on Design for Elevated Temperature Environment, 1971.
21. P. Hähner et al., Int. J. Fatigue,2008, vol. 30, pp. 372-381.10.1016/j.ijfatigue.2007.01.052 ↗
22. ASTM: Standard Practice for Strain Controlled Thermomechanical Fatigue Testing, E2368.ASTM, 2004.
23. T. L. Anderson, Fracture Mechanics: Fundamentals and Applications, 3 edn., CRC Press, Boca Raton, 2004, p. 640.
24. P. Kumar: Elements of Fracture Mechanics. McGraw-Hill, New York, 2009, p. 273
25. H. Tada, P.C. Paris, and G.R. Irwin: in The Stress Analysis of Cracks Handbook, Third Edition, H. Tada, P.C. Paris, and G.R. Irwin, eds., ASME, New York, 2000.10.1115/1.801535 ↗
26. S. Ghodrat and L. A. I. Kestens, Steel Res. Int.,2016, vol. 86, p. 8.
27. H. J. Christ, A. Jung, H. J. Maier, and R. Teteruk, Sadhana,2003, vol. 28, pp. 147-165.10.1007/BF02717131 ↗
28. M. J. Dong, C. Prioul, and D. François, Metall and Mat Trans A,1997, vol. 28, pp. 2245-2254.10.1007/s11661-997-0182-7 ↗
29. G.E. Dieter: Mechanical Metalurgy, 2nd ed., McGraw-Hill Book Co., New York, 1976, pp. 241–75.
30. T.E. Reinton: in Norwegian University of Science and Technology, Trondheim, 2016, vol. Master.