journal article·2019-11

Wire Electric Discharge Machining of P91 Steel: Microstructure and Thermal Modeling Studies

S. Bhattacharya, A. Mishra, N. Keshkar, S. Kumar, V. Kain, G. K. Dey

Publisher page

Abstract

The effect of different cutting parameters used during wire electric discharge machining (WEDM) of P91 steel on the cutting process, microstructure on or under the surface, and the surface finish was examined in this study with a view toward understanding the cutting process fundamentally. The approach used was based on heat transfer modeling and experimental validation of the thermal effects by examining the microstructure and the surface smoothness. The microstructure below the surface was analyzed experimentally in considerable detail using, besides other tools, a high-resolution transmission electron microscope to examine the nature and the morphology of the phases. The different microstructural features were explained from the heat generated and cooling rates estimated in thermal modeling and a good agreement was found. The understanding of the plasma formation and heat transfer during the process provides a means of predicting the surface finish after WEDM in any material provided the thermal properties are known. This aspect was verified in this study by examining the cut surface generated in a variety of materials and by thermal modeling study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Sireli E, Orhon N, Sireli GK (2017) Int J Refract Met Hard Mater 64:190–9910.1016/j.ijrmhm.2016.12.001 ↗
2. Van Djick ES, Dutre W (1994) J Phys D 7:899–91010.1088/0022-3727/7/6/316 ↗
3. P.V. Krakhmalev, J. Sukumaran, and A. Gaard: Int. J. Refract. Met. Hard Mater., 2007, vol. 25, pp. 171–78.10.1016/j.ijrmhm.2006.04.004 ↗
4. H.T. Chen and J.Y. Lin: Int. J. Heat Mass Transfer, 1992, vol. 36, pp. 2891–98.
5. Thomas R. Newton, Shreyes N. Melkotea, Thomas R. Watkins, Rosa M. Trejo, and Laura Reister: Mater. Sci. Eng. A, 2009, vols. 513–514, pp. 208–15.10.1016/j.msea.2009.01.061 ↗
6. Bülent Ekmekci: Appl. Surf. Sci., 2007, vol. 253, pp. 9234–40.10.1016/j.apsusc.2007.05.078 ↗
7. Yanzhen Zhang, Yonghong Liu, Renjie Ji, and Baoping Cai: Appl. Surf. Sci., 2011, vol. 257, pp. 5989–97.10.1016/j.apsusc.2011.01.083 ↗
8. Maher I, Sarhan AAD, Marashi H (2017) Compr. Mater. Finish 1:231–6610.1016/B978-0-12-803581-8.09154-2 ↗
9. L. Tang and Y. Guo: Int. J. Adv. Manufact. Technol., 2014, vol. 70, pp. 1369–76.10.1007/s00170-013-5380-4 ↗
10. J. Huang, Y. Liao, and W. Hsue: J. Mater. Processing Technol.,1999, vol. 87, pp. 69–81.10.1016/S0924-0136(98)00334-3 ↗
11. A. Hasçalýk and U.C. Aydaş: J. Mater. Processing Technol., 2004, vol. 148, pp. 362–67.10.1016/j.jmatprotec.2004.02.048 ↗
12. H. Lee and J. Yur: Mater. Manufact. Processing, 2000, vol. 15 (6), pp. 781–80610.1080/10426910008913021 ↗
13. Pandey C, Mahapatra MM (2017) Proc Inst Mech Eng E 231:1141–6110.1177/0954408916656678 ↗
14. C. Pandey and M.M. Mahapatra: J. Mater. Eng. Performance, 2016, vol. 25, pp 2195–2210.10.1007/s11665-016-2064-x ↗
15. Kibria G, Sarkar B, Pradhan BB, Bhattacharyya B (2009) Int J Adv Manuf Technol 48:557–7010.1007/s00170-009-2298-y ↗
16. Singh V, Pradhan SK (2014) Procedia Eng 97:1597–160810.1016/j.proeng.2014.12.310 ↗
17. Daryl D. DiBitonto, Philip T. Eubank, Mukund R. Patel, and Maria A. Barrufet: J. Appl. Phys., 1989, vol. 66, p. 4095–103.10.1063/1.343994 ↗
18. Govindan P, Joshi SS (2012) J Manuf Process 14:277–8810.1016/j.jmapro.2012.05.003 ↗
19. Bhattacharya S, Tiwari N, Mishra A, Mitra S, Dey GK, Ghorui S (2019) Plasma Chem Plasma Process 39:1019–4810.1007/s11090-019-09968-7 ↗
20. S. Jithin, A. Raut, U.V. Bhandarkar and S.S. Joshi: Procedia Manuf., 2018, vol 26, pp. 617–2810.1016/j.promfg.2018.07.072 ↗
21. Jithin S, Bhandarkar UV, Joshi SS (2017) J Manuf Sci Eng 139(11):11100210.1115/1.4037322 ↗
22. M. Kunieda, B. Lauwers, K.P. Rajurkar, and B.M. Schumacher: CIRP Ann. Manuf. Technol., 2005, vol. 54, pp. 599–622.10.1016/S0007-8506(07)60020-1 ↗
23. Jin Wang, Y.B. Guo, Cheng Fu, and Zhixin Jia: J. Manufact. Processes, 2018, vol. 31, pp. 96–102.10.1016/j.jmapro.2017.11.008 ↗
24. J.F. Liu and Y.B. Guo: Procedia CIRP, 2016, vol. 45, pp. 299–302.10.1016/j.procir.2016.02.060 ↗
25. Rajesha S, Jawalkar CS, Mishra RR, Sharma AK, Kumar P (2014) Int J Rec Adv Mech Eng 3:53-62
26. E. Uhlmann, M. Röhner, M. Langmack, and T. Schimmelpfennig: Micro-electrical Discharge Machining: Micro and Nano Technologies, 2015, pp. 81–105.10.1016/B978-0-323-31149-6.00004-9 ↗