journal article·2019-01

Hardening Low-Carbon Steels by Engineering the Size and Distribution of Inclusions

Huigai Li, Liuxing Wang, Haitao Xiao, Jiali Xu, Shaobo Zheng, Qijie Zhai, Ke Han

Publisher page

Abstract

Ultra-hard low-carbon steels usually need many processing steps after casting. This paper introduces a single-step direct-cast hardening (DiCH) method for making ultra-hard, low-carbon steels by manipulating two variables: free oxygen content before solidification and cooling rate during solidification. Without any post-casting steps required to enhance hardness, DiCH produced property-gradient steel with high surface hardness (4.2 GPa Vickers) directly from liquid metal. The optimum size, number, and distribution of oxide inclusions were achieved in condition of intermediate oxygen content (25 to 45 ppm) and high cooling rate (≥ 550K/s). Ultra-high hardness was achieved at the surface of DiCH samples with a mixture of refined acicular ferrite (AF) and martensite-like ferrite (MF). Two factors contributed to refinement of microstructure and enhancement of hardness: a high cooling rate during the solidification process, and a high density of submicron oxide inclusions in the cast steel. At cooling rates higher than 2500 K/s, refined AF and MF was obtained, accompanied by high densities (up to 600/mm2) of multiple-component, Ti-containing oxides of sizes between 0.5 and 0.7 μm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. D. J. Sosinsky, P. Campbell, R. Mahapatra, W. Blejde and F. Fisher: Metallurgist, 2008, vol. 52, pp. 691-699.10.1007/s11015-009-9116-5 ↗
2. S. L. Shrestha, K. Y. Xie, C. Zhu and S. P. Ringer, C Killmore: Materials Science and Engineering A, 2013, vol. 568, pp. 88-95.10.1016/j.msea.2013.01.021 ↗
3. Z. Z. Wang, K. Carpenter, Z. X. Chen and C. Killmore: Materials Science and Engineering A, 2017, vol. 700, pp. 234-240.10.1016/j.msea.2017.05.106 ↗
4. W. L. Costin, O Lavigne, A Kotousov: Materials Science & Engineering A, 2016, vol. 663, pp. 193-203.10.1016/j.msea.2016.03.103 ↗
5. D.V. Doane, J.S. Kirkaldy: Hardenability concepts with applications to steel, 1nd ed. Metallurgical Society of AIME, Chicago, 1978, pp. 229.
6. G. Krauss: Materials Science & Engineering A, 1999, vol. 273–275(99), pp. 40-57.10.1016/S0921-5093(99)00288-9 ↗
7. H. F. Wang, F. Xia: Iron, 1984, vol. 10, pp. 39-44.
8. C. F. Wang, M. Q. Wang, J. Shi, W. J. Hui, H. Dong: Iron & Steel, 2007, vol. 42(11), pp. 57-60.
9. H. Ohta, H. Suito: ISIJ International, 2006, vol. 46(1), pp. 42-49.10.2355/isijinternational.46.42 ↗
10. H. Goto, K. Miyazawa, K. Yamaguchi, S. Ogibayashi, K. Tanaka: ISIJ International, 1994, vol. 34(5), pp. 414-419.10.2355/isijinternational.34.414 ↗
11. H. Yu, J. Li: International Journal of Minerals Metallurgy & Materials, 2015, vol. 22(11), pp. 1157-1162.10.1007/s12613-015-1180-1 ↗
12. L. Q. Deng, S. L. Zou, D. W. Tang, Y. P. Xie, D. Zhang: Cast. Technol. Chin., 2016, 9:1807-1811.
13. D.J. Sosinsky, P. Campbell, R. Mahapatra, W. Blejde, F. Fisher: Metallurgist, 2008, vol. 52 (11-12), pp. 691-699.10.1007/s11015-009-9116-5 ↗
14. Z.P. Xiong, A.G. Kostryzhev, N.E. Stanford: Material Science & Engineering A, 2016, vol. 651, pp. 291-305.10.1016/j.msea.2015.10.120 ↗
15. S Ge, S Chang, T Wang, LE Calzado, M Isac: Transactions of the Iron & Steel Institute of Japan, 2014, vol. 54(3), pp. 1-12.
16. J. S. Byun, J. H. Shim, J. Y. Suh, Y. J. Oh, Y. W. Cho: Mater. Sci. Eng. A, 2001, s 319–321(00), 326-331.10.1016/S0921-5093(00)02014-1 ↗
17. CR Killmore, A Phillips, H Creely, H Kaul, P Campbell: Iron Steel Technol., 2007, vol. 10(10):90.
18. H. T. Liu, Z. Y. Liu, Y. Q. Qiu, G. M. Cao: Materials Characterization, 2009, vol. 60(1), pp. 79-82.10.1016/j.matchar.2008.06.005 ↗
19. D. S. Sarma, A. V. Karasev, P. G. Jonsson: Transactions of the Iron & Steel Institute of Japan, 2009, vol. 49(7), pp. 1063-1074.10.2355/isijinternational.49.1063 ↗
20. J. S. Byun, J. H. Shim, Y. W. Cho, D. N. lee: Acta Materialia, 2003, vol. 51(6), pp.1593-1606.10.1016/S1359-6454(02)00560-8 ↗
21. S. St-Laurent: Materials Science & Engineering A, 1992, vol. 149(2), pp. 203-16.10.1016/0921-5093(92)90381-A ↗
22. W. Mu, H. Mao, H. Jonsson and K. Nakajima: Steel Research International, 2016, vol. 87(3), pp.311-319.10.1002/srin.201500043 ↗
23. D. Loder, S. K. Michelic and C. Bernhard: Journal of Materials Science Research, 2017, vol. 6(1), pp. 24-43.10.5539/jmsr.v6n1p24 ↗
24. Z. Xiong, S. Liu, X. Wang, C. Shang, R. D. K. Misra: Materials Characterization, 2015, vol. 106, pp. 232-239.10.1016/j.matchar.2015.06.001 ↗
25. Y. Li, X. L. Wan, W. Y. Lu, A. A. Shirzadi, O. Isayev: Materials Science & Engineering A, 2016, vol. 659, pp. 179-187.10.1016/j.msea.2016.02.035 ↗
26. Z. Zhang, R. A. Farrar: Materials Science & Technology, 1996, vol. 12(3), pp. 237-260.10.1179/mst.1996.12.3.237 ↗
27. B. Kim, S. Uhm, C. Lee, J. Lee, Y. An: Journal of Engineering Materials & Technology, 2005, vol. 127(2), pp. 204-213.10.1115/1.1857933 ↗
28. A. Suzuki, T. Suzuki, Y. Nagaoka, Y. Iwata: Journal of the Japan Institute of Metals, 1968, vol. 32(12), pp. 1301-1305.10.2320/jinstmet1952.32.12_1301 ↗
29. H. F. Huang, J. Li, D. H. Li, R. D. Liu, G. H. Lei: Journal of Nuclear Materials, 2014, vol. 454(1-3), pp.168-172.10.1016/j.jnucmat.2014.07.033 ↗
30. W. C. Oliver, G. M. Pharr: Journal of Materials Research, 2004, vol.19(1), pp.3-20.10.1557/jmr.2004.19.1.3 ↗
31. E. O. Hall: Proceedings of the Physical Society, 2002, vol. 64(6), p. 495.
32. H. Huang, C. Yang, M. D. L. Reyes, Y. Zhou, L. Yan: Journal of Materials Science & Technology, 2015, vol. 31(9), pp. 923-929.10.1016/j.jmst.2014.12.009 ↗
33. L. Hao. N. Xiao, C. Zheng, D. Li: Journal of Materials Science & Technology, 2010, vol. 26(12), pp.1107-1113.10.1016/S1005-0302(11)60009-1 ↗
34. W. Vandermeulen, R. W. Bosch, F. Snijkers: Journal of Materials Science, 2015, vol.50(7), pp.2932-2943.10.1007/s10853-015-8858-7 ↗
35. E. Breval, G. C. Dodds, N. H. Macmillan: Materials Research Bulletin, 1985, vol. 20(4), pp. 413-429.10.1016/0025-5408(85)90009-1 ↗
36. M. Dao, N. Chollacoop, K. J. V. Vliet, T. A. Venkatesh, S. Suresh: Acta Materialia, 2001, vol. 49(19), pp. 3899-3918.10.1016/S1359-6454(01)00295-6 ↗
37. K. Han, D.V. Edmonds, G.D.W. Smith: Metallurgical and Materials Transactions A, 2001, vol. 32(6), pp.1313-1324.10.1007/s11661-001-0222-7 ↗
38. P. Cizek, B.P. Wynne, C.H.J. Davies, B.C. Muddle and P.D. Hodgson: Metallurgical and Materials Transactions A, 2002, vol. 33(5), pp. 1331–1349.10.1007/s11661-002-0059-8 ↗
39. D. Loder, S. K. Michelic and C. Bernhard: Journal of Materials Science Research, 2017, vol. 6(1), pp. 24-43.10.5539/jmsr.v6n1p24 ↗