A Study of Intermix in a Six-Strand Billet Caster
Source abstract
Abstract
The purpose of this study was to develop an integrated intermix model suitable for a six-strand billet caster. Mathematical and physical simulations were performed in order to compare intermixing under the current procedure with alternative approaches. Plant data were collected, including different operational strategies regarding the tundish weight at holding level, to validate the findings. Additionally, samples were taken from the billets to understand the nature of strand mixing in small sections. The effect of tundish level during the holding procedure was evaluated. It was determined that the most pronounced effect on intermixing was caused by the difference in superheat between the old and new grades. The model will be used to reduce steel downgrade resulting from grade intermixing and for scheduling of intermix sequences.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Iron and Steelmaking Processes · Cyclone Separators and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. M. Souza, A. Gomes, A. Bretas, M. G. Ravetti: Optimization Letters, 2016, Vol.10, pp. 667-68310.1007/s11590-015-0901-8 ↗
2. M. B. Goldschmit; S. P Ferro; G. F. Walter, V. G. Aranda and J. A. Tena-Morelos: Metall. Mater. Trans. B, 2001, Vol. 32B, pp. 537–546.10.1007/s11663-001-0038-2 ↗
3. B.G. Thomas: Steelmaking Conference Proceedings, 1996, pp. 519–30
4. X. Huang; B. G. Thomas: Metall. Mater. Trans. B, 1993, Vol. 24, pp. 379-38110.1007/BF02659140 ↗
5. X. Huang, B. G. Thomas: Metall. Mater. Trans. B, 1996, Vol. 27, pp. 617-63210.1007/BF02915660 ↗
6. A. Dubey: Indian Institute of Technology - Dissertation in Mechanical Industrial Engineering, 2010, Code: G20332
7. M. J. Cho, S. J. Kim: ISIJ International, 2010, Vol.50, pp. 1175-117910.2355/isijinternational.50.1175 ↗
8. J-L. Yeh; W. S. Hwang; C.-L Chou: ISIJ International, 1993, Vol. 33, pp. 588-59410.2355/isijinternational.33.588 ↗
9. V. Seshadri, V. O Cravo, D. B. Moreira, I. A. Silva, C.A. Silva: 1st International Conference Advances in Metallurgical Processes and Materials, 2007, pp. 187–200.
10. S. Chakraborty, and Y. Sahai: Metall. Mater. Trans. B, 1992, Vol. 23B, pp. 153-167.10.1007/BF02651850 ↗
11. H. Joo, and R. I. L. Guthrie: Metall. Mater. Trans. B, 1993, Vol. 24B, pp. 767-777.10.1007/BF02663137 ↗
12. C. Damle, and Y. Sahai: ISIJ International, 1996, Vol. 36, pp. 681-68910.2355/isijinternational.36.681 ↗
13. A. Cwudziński: International Journal of Cast Metals Research, 2017, Vol. 30, pp. 50-6010.1080/13640461.2016.1234223 ↗
14. M. Alizadeh; H Edris, Hossein; and A. R. Pishevar: ISIJ International, 2008, Vol. 48, pp. 28-3710.2355/isijinternational.48.28 ↗
15. A. Muralikrishna, S. Bagui, and D. Mazumdar: Transactions of the Indian Institute of Metals, 2013, Vol. 66, pp. 281-29510.1007/s12666-013-0270-x ↗
16. S. Kant, P. K. Jha, and P. Kumar: Ironmaking and Steelmaking, 2011, Vol. 38, pp. 391-39710.1179/1743281211Y.0000000007 ↗
17. K. Chattopadhyay, I. Mihaiela and R. I. L Guthrie: ISIJ International, 2012, Vol. 52, pp. 2026–203510.2355/isijinternational.52.2026 ↗
18. T. Merder: J. Achiev. Mater. Manuf. Eng., 2012, Vol. 55/2, pp. 561-66.
19. ANSYS, ANSYS CFX Reference Guide, 2015, Release 16.2.