journal article·2018-09

Investigation of the γ′-Strengthened Quaternary Co-Based Alloys Co-Al-W-Ta

Alexander Epishin, Nikolay Petrushin, Gert Nolze, Gregory Gerstein, Hans Jürgen Maier

Publisher page

Abstract

The alloying system Co-Al-W-Ta is comprehensively investigated in the vicinity of the compositional point Co-9Al-10W-2Ta, at. pct. These investigations provided a large amount of quantitative information, which can be used for alloy development, namely, the compositional dependences of the γ′-solvus, solidus, and liquidus temperatures; fraction of the extrinsic phases after casting; the compositional dependence of the γ/γ′-lattice misfit; the element partitioning between γ- and γ′-phases; and the two phase compositional area γ/γ′ in the Co-rich part of the Co-Al-W-Ta phase diagram at 900 °C. It is shown that additions of Ta elevate the γ′-solvus temperature and increase the γ/γ′-lattice misfit, but adding more than about 3 at. pct Ta results in a large amount of undissolvable extrinsic phases. Additionally, two Co-Al-W-Ta alloys with lower content of W were developed and solidified as [001] single crystals for mechanical testing in a temperature range between 20 and 1200 °C. These tests included measurement of the Young modulus, tensile tests with constant strain rate, and stress rupture tests. It was found that at temperatures up to about 750 °C the ultimate tensile strength of Co-Al-Ta-W alloys can be at the same level or even higher than of Ni-based superalloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Science, 2006, vol. 312, 90-91.10.1126/science.1121738 ↗
2. T.M. Pollock, J. Dibbern, M. Tsunekane, J. Zhu,and A. Suzuki: JOM, 2010, vol. 62, pp. 58-63.10.1007/s11837-010-0013-y ↗
3. A. Bauer, S. Neumeier, F. Pyczak, R.F. Singer, and M. Göken: Mat. Sci. Eng. A, 2012, vol. 550, pp. 333– 341.10.1016/j.msea.2012.04.083 ↗
4. A. Bauer, S. Neumeier, F. Pyczak, and M. Göken: Scripta Mater., 2010, vol. 63, pp. 1197–1200.10.1016/j.scriptamat.2010.08.036 ↗
5. N. Petrushin, K. Hvatzkiy, V. Gerasimov, T. Link, A. Epishin, G. Nolze, and G. Gerstein: Adv. Eng. Mater., 2015, vol.17, pp. 755–760.10.1002/adem.201500088 ↗
6. I. Lopez-Galilea, C. Zenk, S. Neumeier, S. Huth, W. Theisen, and M. Göken: Adv. Eng. Mater., 2015, vol. 17, pp. 741–747.10.1002/adem.201400249 ↗
7. V.A. Vertogradskii, and L.S. Egorova: J. Eng. Phys. Thermophys.,1979, vol. 36, pp. 324-328.10.1007/BF00861920 ↗
8. A. Epishin, T. Link, and G. Nolze: J. Microsc., 2007, vol. 228, pp. 110-117.10.1111/j.1365-2818.2007.01831.x ↗
9. Image Processing and Analysis in Java: https://imagej.nih.gov/ij/.
10. A.I. Samoilov, R.M. Nazarkin, N.V. Petrushin, and N.S. Moiseeva: Russ. Met. (Metally), 2011, vol. 2011, pp. 459-464.10.1134/S0036029511050119 ↗
11. U. Glatzel, Microstructure and internal strains of undeformed and creep deformed samples of a nickel-base superalloy, Verlag Dr. Köster, Berlin, 1994.
12. S. Kobayashi, Y. Tsukamoto, T. Takasugi, H. Chinen, T. Omori, K. Ishida, and S. Zäfferer: Intermetallics, 2009, vol. 17, pp. 1085–1089.10.1016/j.intermet.2009.05.009 ↗
13. J.D. Verhoeven, J.H. Lee, F.C. Laabs, and L.L. Jones: J. Phase Equilib., 1991, vol.12, pp. 15-23.10.1007/BF02663666 ↗
14. G.I. Morozova, E.P. Paremuzov, L.B. Vasilenok, and M.I. Ermolva: Metal. Sci. Heat Treat., 1993, vol. 35, pp.293-297,.10.1007/BF00780600 ↗
15. A. Sengupta, S.K. Putatunda, L. Bartosiewicz, J. Hangas, P. J. Nailos, M. Peputapeck, and F. E. Alberts: J. Mat. Eng. Perform., 1994, vol. 3, pp. 73–81.10.1007/BF02654502 ↗
16. L.D. Sokolov, A.N. Gladkikh, V.A. Skudnov, and V.M. Solenov: Metal. Sci. Heat Treat., 1969, vol. 11, pp. 626-28.10.1007/BF00652118 ↗
17. G. Dmitrieva, V. Vasilenko, and I. Melnik: Chem. Met. Alloys, 2008, vol.1, pp. 338-342.10.30970/cma1.0073 ↗
18. S. Meher, H.-Y. Yan, S. Nag, D. Dye, and R. Banerjee: Scripta Mater., 2012, vol.67, pp. 850–853.10.1016/j.scriptamat.2012.08.006 ↗
19. F. Pyczak, A. Bauer, M. Göken, U. Lorenz, S. Neumeier, M. Oehring, J. Paul, N. Schell, A. Schreyer, A. Stark, and F. Symanzik: J. Alloys Compd., 2015, vol. 632, pp. 110–115.10.1016/j.jallcom.2015.01.031 ↗
20. K. Shinagawa, T. Omori, K. Oikawa, R. Kainuma, and K. Ishida: Scripta Mater., 2009, vol. 61, pp. 612–615.10.1016/j.scriptamat.2009.05.037 ↗
21. M. Ooshima, K. Tanaka, N. L. Okamoto, K. Kishida, and H. Inui: J. Alloys Compd., 2010, vol. 508, pp. 71–78.10.1016/j.jallcom.2010.08.050 ↗
22. A. Suzuki, and T.M. Pollock: Acta Mater., 2008, vol. 56, pp. 1288-1297.10.1016/j.actamat.2007.11.014 ↗
23. M. Tsunekane, A. Suzuki, and T.M. Pollock: Intermetallics, 2011, vol. 19, pp. 636-64310.1016/j.intermet.2010.12.018 ↗
24. H.-Y. Yan, V.A. Vorontsov, and D. Dye: Intermetallics, 2014, vol. 4, pp. 44-53.10.1016/j.intermet.2013.10.022 ↗
25. MTDATA—Phase Diagram Software from the National Physical Laboratory: http://resource.npl.co.uk/mtdata/phdiagrams/alco.htm
26. MTDATA—Phase Diagram Software from the National Physical Laboratory: http://resource.npl.co.uk/mtdata/phdiagrams/cow.htm
27. MTDATA—Phase Diagram Software from the National Physical Laboratory: http://resource.npl.co.uk/mtdata/phdiagrams/cota.htm
28. I. Povstugar, P.-P. Choi, S. Neumeier, A. Bauer, Ch. H. Zenk, M. Göken, and D. Raabe: Acta Mater. (2014), 78:78–85.10.1016/j.actamat.2014.06.020 ↗
29. J. Midtlyng, A. I. Epishin, N. V. Petrushin, T. Link, G. Nolze, I. L. Svetlov and W. Reimers: J. Mater. Res., 2017, vol. 32, pp. 4466-4474.10.1557/jmr.2017.424 ↗
30. U. Bruckner, A. Epishin and T. Link: Acta Mater., 1997, vol. 45, pp. 5223-5231.10.1016/S1359-6454(97)00163-8 ↗
31. K. Shinagawa, T. Omori, J. Sato, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Mater. Trans. 2008, vol. 49, pp. 1474-1479.10.2320/matertrans.MER2008073 ↗
32. C.H. Zenk, S. Neumeier, M. Kolb, N. Volz, S.G. Fries, O. Dolotko, I. Povstugar, D. Raabe, and M. Goken: Shirteenth Int. Symp. Superalloys, 2016, pp. 969–80.10.1002/9781119075646.ch103 ↗
33. F. Xue, C.H. Zenk, L.P. Freund, M. Hoelzel, S. Neumeier, and M. Göken, Scripta. Mater., 2018, vol. 142, pp. 129-132.10.1016/j.scriptamat.2017.08.039 ↗
34. H.-Y. Yan, V.A. Vorontsov, J. Coakley, N.G. Jones, H.J. Stone, and D. Dye: Twelfth Int. Symp. Superalloys, 2012, pp. 705–14.10.1002/9781118516430.ch78 ↗
35. H. Mughrabi: Acta Mater. 2014, vol. 81, pp. 21–29.10.1016/j.actamat.2014.08.005 ↗
36. A. Suzuki, G.C. De Nolf and T.M. Pollock: Scripta. Mater. 2007, vol. 56, pp. 385–388.10.1016/j.scriptamat.2006.10.039 ↗
37. Y. M. Eggeler, M. S. Titus, A. Suzuki, T. M. Pollock: Acta Mater., 2014, vol. 77, pp. 352-359.10.1016/j.actamat.2014.04.037 ↗
38. N.L. Okamoto, T. Oohashi, H. Adachi, K. Kishida, H. Inui, and P. Veyssière: Philos. Mag., vol. 91, 2011, pp. 3667-3684.10.1080/14786435.2011.586158 ↗
39. N. Baluc, R. Schäublin, and K.J. Hemker: Philos. Mag. Lett., vol. 64, 1991, pp. 327-334.10.1080/09500839108214629 ↗
40. K.J. Hemker, and M.J. Mills: Philos. Mag. A, 1993, vol. 68, pp. 305-324.10.1080/01418619308221207 ↗
41. Y Mishima, S Ochiai, N Hamao, M Yodogawa, and T Suzuki: Mater. Trans., 1986, vol. 27, pp. 656-66
42. H. Rehman, Solid solution strengthening and diffusion in nickel- and cobalt-based superalloys, FAU University Press, Erlangen, 2016.
43. A.I. Epishin, N.V. Petrushin, T. Link, G. Nolze, Yu.V. Loshchinin, and G. Gerstein: Rus. Metall. (Metally), 2016, vol. 2016, pp. 286–291.10.1134/S0036029516040078 ↗
44. S. Neumeier, H. U. Rehman, J. Neuner, C. H. Zenk, S. Michel, S. Schuwalow, J. Rogal, R. Drautz and M. Göken: Acta Mater., 2016, vol. 106, p 304–312.10.1016/j.actamat.2016.01.028 ↗
45. A. Epishin, A. Chyrkin, G. Nolze, J. Midtlyng, H. M. Mayer, N. Petrushin, and W. Reimers: JPED, 2018, vol. 39, pp. 176-185.10.1007/s11669-018-0620-9 ↗
46. C.K. Bullough, M. Toulios, M. Oehl, and P. Lukas: The Sixth Liege Conf. Mater. Adv. Power Eng., 1998, pp. 861–78.