A Precipitate-Strengthening Model Based on Crystallographic Anisotropy, Stress-Induced Orientation, and Dislocation of Stress-Aged Al-Cu-Mg Single Crystals
Source abstract
Abstract
We investigate the relationship between inhomogeneously distributed S precipitates and hardness of stress-aged single-crystal Al-Cu-Mg. First, the effect of crystallographic anisotropy is considered and modeled from the results of free-stress aged single-crystal Al-1.2Cu-0.5Mg with ( $$ 1\bar{1}8 $$ ), ( $$ \bar{1}\bar{2}5 $$ ), (356), and (319) plane orientations. Effect of crystallographic anisotropy depends on the angle between the plane orientation of the single crystal and {012} habit planes of the S precipitates. Second, the effects of the magnitude of the applied stress and direction on the S-laths’ size and distribution are considered. As the applied stress-induced S-laths inhomogeneously distribute during aging, the effect of the single-crystal’s orientation on the distribution of S-laths is modeled. The results show that a single crystal near (111) plane orientation has the lowest stress-orienting effect. Finally, at higher applied stresses, such as 50 MPa, the S precipitates disperse more homogeneously due to the influence of the dislocations. Inhibiting the effect of dislocation depends on the angle between the plane orientation of the single crystal and the {111} dislocation slide planes. A precipitate-strengthening model of the stress-aged Al-Cu-Mg alloys is established based on crystallographic anisotropy, stress-orienting precipitates, and inhibiting the effect of dislocations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. T.F. Morgeneyer, J. Besson, H. Proudhon, M.J. Starink, and I. Sinclair: Acta Mater., 2009, vol. 57, pp. 3902–15.10.1016/j.actamat.2009.04.046 ↗
2. K.K. Cho, Y.H. Chung, C.W. Lee, S.I. Kwun, and M.C. Shin: Scripta Mater., 1999, vol. 40, pp. 651–7.10.1016/S1359-6462(98)00481-3 ↗
3. A.K. Vasudevan, M.A. Przystupa, and W.G. Fricke Jr.: Scripta Mater., 1990, vol. 24, pp. 1429–34.10.1016/0956-716X(90)90409-A ↗
4. M. Toyoda, H. Toda, H. Ikuno, T. Kobayashi, M. Kobayashi, and K. Matsuda: Scripta Mater., 2007, vol. 56, pp. 377–80.10.1016/j.scriptamat.2006.11.005 ↗
5. N.J. Kim and E.W. Lee: Acta Metall. Mater., 1993, vol. 41, pp. 941–8.10.1016/0956-7151(93)90028-Q ↗
6. W.F. Hosford and S.P. Agrawal: Metall. Trans. A, 1975, vol. 6, pp. 487–91.10.1007/BF02658406 ↗
7. T. Eto, A. Sato, and T. Mori: Acta Mater., 1978, vol. 26, pp. 499–508.10.1016/0001-6160(78)90175-X ↗
8. B. Skrotzki, G.J. Shiflet, and E.A. Starke Jr.: Metall. Trans. A, 1996, vol. 27, pp. 3431–44.10.1007/BF02595436 ↗
9. A.W. Zhu and E.A. Starke Jr.: Acta Mater., 2001, vol. 49, pp. 2285–95.10.1016/S1359-6454(01)00119-7 ↗
10. H. Hargarter, M.T. Lyttle, and E.A. Starke Jr.: Mater. Sci. Eng. A, 1998, vol. 257, pp. 87–99.10.1016/S0921-5093(98)00826-0 ↗
11. A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, and W.S. Miller: Mater. Sci. Eng. A, 2000, vol. 280, pp. 102–7.10.1016/S0921-5093(99)00674-7 ↗
12. L.H. Zhan, J.G. Lin, and T.A. Dean: Int. J. Mach. Tools Manuf., 2011, vol. 51, pp. 1–17.10.1016/j.ijmachtools.2010.08.007 ↗
13. R.A. Jeshvaghani, H. Zohdi, H.R. Shahverdi, M. Bozorg, and S.M.M. Hadavi: Mater. Charact., 2012, vol. 73, pp. 8–15.10.1016/j.matchar.2012.05.012 ↗
14. R.A. Jeshvaghani, H.R. Shahverdi, and S.M.M. Hadavi: Mater. Sci. Eng. A, 2012, vol. 552, pp. 172–8.10.1016/j.msea.2012.05.027 ↗
15. J. Zhang, Y.L. Deng, and X.M. Zhang: Mater. Sci. Eng. A, 2013, vol. 563, pp. 8–15.10.1016/j.msea.2012.10.055 ↗
16. H.Y. Li, W. Kang, and X.C. Lu: J. Alloy Compd., 2015, vol. 640, pp. 210–8.10.1016/j.jallcom.2015.03.212 ↗
17. M.R. Louthan: Trans. TMS-AIME, 1963, vol. 227, pp. 1166–70.
18. M.R. Louthan and C.L. Angerman: Trans. TMS-AIME, 1966, vol. 236, pp. 221–2.
19. X.Q. Ma, S.Q. Shi, C.H. Woo, and L.Q. Chen: Comput. Mater. Sci., 2002, vol. 23, pp. 83–90.10.1016/S0927-0256(01)00226-9 ↗
20. Y. Nakada, W.C. Leslie, and T.P. Churay: Trans. ASM, 1967, vol. 60, pp. 223–7.
21. A.W. Zhu and E.A. Starke: Acta Mater., 1999, vol. 47, pp. 3263–9.10.1016/S1359-6454(99)00179-2 ↗
22. A.W. Zhu, J. Chen, and E.A. Starke: Acta Mater., 2000, vol. 48, pp. 2239–46.10.1016/S1359-6454(00)00026-4 ↗
23. A.W. Zhu and E.A. Starke: Acta Mater., 2001, vol. 49, pp. 3063–9.10.1016/S1359-6454(01)00202-6 ↗
24. E.A. Starke Jr. and J.T. Staley: Prog. Aerosp. Sci., 1996, vol. 32, pp. 131–72.10.1016/0376-0421(95)00004-6 ↗
25. J.F. Nie, B.C. Muddle, and I.J. Polmear: Mater. Sci. Forum, 1996, vol. 217–222, pp. 1257–62.10.4028/www.scientific.net/MSF.217-222.1257 ↗
26. J.F. Nie and B.C. Muddle: J. Phase Equilib., 1998, vol. 19, pp. 543–51.10.1361/105497198770341734 ↗
27. J.F. Nie and B.C. Muddle: Acta Mater., 2008, vol. 56, pp. 3490–501.10.1016/j.actamat.2008.03.028 ↗
28. X.B. Guo, Y.L. Deng, J. Zhang, and X.M. Zhang: Mater. Sci. Eng. A, 2015, vol. 644, pp. 358–64.10.1016/j.msea.2015.07.067 ↗
29. X.B. Guo, Y.L. Deng, J. Zhang, and X.M. Zhang: Mater. Charact., 2015, vol. 107, pp. 197–201.10.1016/j.matchar.2015.07.020 ↗
30. H.P.E.A. Westgren: Ark. Kemi Mineral. Geol., 1943, vol. 16B, p. 13.
31. L.F. Mondolfo: Aluminum Alloys—Structure and Properties, Butterworth, London, 1976.
32. S.W. Wang and M.J. Starink: Int. Mater. Rev., 2005, vol. 50, pp. 193–215.10.1179/174328005X14357 ↗
33. E. Schmid and W. Boas: Plasticity of Crystals, F. A. Hughes and Co. Ltd., London, 1950.