journal article·2017-08

Influence of Tungsten and Tantalum Content on Evolution of Secondary Phases in 9Cr RAFM Steels: An Experimental and Computational Study

Ravikirana, R. Mythili, S. Saroja

Publisher page

Abstract

This paper presents the results of a systematic study on the role of alloying elements W and Ta on the microstructural evolution in 9Cr-W-Ta-V-C Reduced Activation Ferritic/Martensitic steels during long-term thermal exposure in the temperature range of 773 K to 923 K (500 °C to 650 °C). The kinetics of evolution of secondary phases like M23C6, MX, and Laves phase crucially depend upon the W and Ta content of the steel in addition to temperature and time, which has been studied in detail using analytical transmission electron microscopy as well as predictive methods. The steel with 1 wt pct W and 0.06 wt pct Ta showed slow recovery below 873 K (600 °C) and no evidence for Laves phase at any temperature. Significant change in microstructure was observed after 10,000 hours of exposure at 923 K (650 °C), while recovery at short durations was retarded by nucleation of MX precipitates. Increase in both W and Ta content of the steel enhanced the tendency for the formation of Laves phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. R.L. Klueh, and D.R. Harries: High-Chromium Frritic and Martensitic Steels for Nuclear Applications, ASTM Monograph, ASTM International: West Conshohocken (2001) 3.10.1520/MONO3-EB ↗
2. F. Abe, T. Noda, H. Araki, and M. Okada: J. Nucl. Sci. Tech., 1994, vol. 1 (4), pp. 279–292.10.1080/18811248.1994.9735152 ↗
3. F. Abe: Sci. Tech. Adv. Mater., 2008, vol. 9 pp. 1–15.10.1088/1468-6996/9/1/013002 ↗
4. R. L. Klueh: Int. Mater. Rev., 2005, Vol. 50 (5), pp. 287–310.10.1179/174328005X41140 ↗
5. S. N. Rosenwasser, P. Miller, J.A. Dalessandro, J.M. Rawls, W.E. Toffolo, and W. Chen: J. Nucl. Mater., 1979, vol. 85–86 pp. 177–182.10.1016/0022-3115(79)90487-2 ↗
6. D.R. Harries: Proceedings of Topological Conference on Ferritic Steels for Use in Nuclear Energy Technologies, Eds. J. W. Davis and D. J. Michel, The Metallurgical Society of AIME, Warrendale, PA, 1984, pp. 141–145.
7. Q. Huang, N. Baluc, Y. Dai, S. Jitsukawa, A. Kimura, J. Konys, R.J. Kurtz, R. Lindau, T. Muroga, G.R. Odette, B. Raj, R.E. Stoller, L. Tan, H. Tanigawa, A.-A.F. Tavassoli, T. Yamamoto, F. Wan, and Y.Wu: J. Nucl. Mater., 2013, vol. 442, pp. S2–S8.10.1016/j.jnucmat.2012.12.039 ↗
8. K.L. Murty, and I. Charit: J. Nucl. Mater., 2008, vol. 383, pp. 189–195.10.1016/j.jnucmat.2008.08.044 ↗
9. R.L. Klueh, and A.T. Nelson: J. Nucl. Mater., 2007, vol. 371, pp. 37–52.10.1016/j.jnucmat.2007.05.005 ↗
10. A. Alamo, J.L. Bertin, V.K. Shamardin, and P. Wident: J. Nucl. Mater., 2007, vol. 367–370, pp. 54–59.10.1016/j.jnucmat.2007.03.166 ↗
11. X. Xiao, G. Liu, B. Hu, J. Wang, and A. Ullah: Mater. Charact., 2013, vol. 82, pp. 130–139.10.1016/j.matchar.2013.05.006 ↗
12. Ravikirana, R. Mythili, S. Raju, S. Saroja, T. Jayakumar, and E. Rajendra Kumar: Mater. Charact., 2013, vol. 84, pp. 196–204.10.1016/j.matchar.2013.08.003 ↗
13. http://www.sentesoftware.co.uk/jmatpro.aspx.
14. C. A. Danon, C. Servant: ISIJ Int., 2005, vol. 45 (6), pp. 903–12.10.2355/isijinternational.45.903 ↗
15. Ravikirana, S. Raju, R. Mythili, S. Saibaba, T. Jayakumar, and E. Rajendra Kumar: Steel Res. Int., 2015, 86 (7), pp. 825–40.10.1002/srin.201400183 ↗
16. P. Fernandez, A.M. Lancha, J. Lapena, and M. Nernandez-Mayoral: Fus. Eng. Des., 2001, vol. 58–59, pp. 787–92.10.1016/S0920-3796(01)00563-4 ↗
17. R. Jarayam, and R.L. Klueh: Metall, Mater. Trans. A, 1998, vol. 29A, pp. 1551–1558.10.1007/s11661-998-0077-2 ↗
18. V. Knežević, J. Balun, G. Sauthoff, G. Inden, and A. Schneider: Mater. Sci. Eng., 2008, vol. 477A, pp. 334–43.10.1016/j.msea.2007.05.047 ↗
19. B. Londolt: Diffusion in solids, metals and alloys. Springer, Berlin, 1990, 372.
20. I. Yoshiaki: J Phase Equilib Diffus 2005, vol. 26(5), pp. 466–475.10.1007/s11669-005-0036-1 ↗
21. V. Thomas Paul, S. Saroja, and M. Vijayalakshmi: J. Nucl. Mater., 2008, vol. 378, pp. 273–281.10.1016/j.jnucmat.2008.06.033 ↗
22. S. Ghosh: J. Mater. Sci., 2010, vol. 451, pp. 823–1829.
23. Ravikirana, R. Mythili, S. Raju, S. Saibaba, T. Jayakumar, and E. Rajendra Kumar: Bull. Mater. Sci., 2014, vol. 37, (6), pp. 1453–1460.10.1007/s12034-014-0096-0 ↗
24. V. Vodarek, and A. Strang: Mater. Chem. Phys., 2003, vol. 81, pp. 480–482.10.1016/S0254-0584(03)00061-0 ↗
25. Ravikirana, R. Mythili, S. Raju, S. Saroja, T. Jayakumar, and E. Rajendra Kumar: Mater. Sci. Tech., 2015, vol. 31 (4), pp. 448–459.
26. S. Saroja, M. Vijayalakshmi, and V.S. Raghunathan: Mater. Trans. JIM, 1993, vol. 34(10), pp. 901–906.10.2320/matertrans1989.34.901 ↗
27. F. Abe, T. Noda, Okada: J. Nucl. Mater., 1992. vol. 195, pp. 51–67.10.1016/0022-3115(92)90363-P ↗
28. D. Dulieu, K. W. Tupholme, G. J. Butterworth: J. Nucl. Mater., 1986, vol. 141–143, pp. 1097–1101.10.1016/0022-3115(86)90148-0 ↗
29. Y. De Carlan, A. Alamo, M. H. Mathon, G. Geoffroy, and A. Castailing: J. Nucl. Mater., 2000, vol. 283–287, pp. 672–76.10.1016/S0022-3115(00)00277-4 ↗
30. H. Sakasegawa, T. Hirose, A. Kohyama, Y. Katoh, T. Harada, K. Asakura, and T. Kumagai: J. Nucl. Mater., 2002, vol. 490, pp. 307–11.
31. K.W. Tupholme, D. Dulieu, and G.J. Butterworth: J. Nucl. Mater., 1991, vol. 179–181, pp. 684–88.10.1016/0022-3115(91)90181-6 ↗
32. R.L. Klueh: Elevated-Temperature Ferritic and Martensitic Steels and Their Application to Future Nuclear Reactors, Oak Ridge National Laboratory, ORNL/TM-2004/176, 2004.10.2172/885938 ↗
33. O. Prat: thesis on “Investigation on Diffusion-Controlled Transformations in Creep Resistant Steels and Grared Cemented Carbides”, Bochum, 2011.
34. K. Ozaki: Low Alloy High Steel Tool Having Constant Toughness, US patent no. US7695576 B2, 13 Apr 2010.
35. K.C. Harikumar, and V. Raghavan: Calphad, 1991, vol. 15 (3), pp. 307–14.10.1016/0364-5916(91)90008-8 ↗
36. K. Sawada, K. Kubo, and F. Abe: Mater. Sci. Tech., 2003, vol. 19, pp. 732–38.10.1179/026708303225010687 ↗
37. J.S. Lee, H.G. Armaki, K. Maruyamab, T. Muraki, and H. Asahi: Mater. Sci. Engg., 2006, vol. 428A, pp. 270–75.10.1016/j.msea.2006.05.010 ↗