Effects of Changes in Test Temperature on Tensile Properties and Notched Vs Fatigue Precracked Toughness of a Zr-Based BMG Composite
Source abstract
Abstract
Tensile and fracture toughness behavior of a Zr-based bulk metallic glass matrix composite (BMGMC) containing a body-centered cubic crystalline phase was examined over temperatures from 77 K to 653 K (−196 °C to 380 °C). The BMGMC exhibited tensile plasticity at all test temperatures. The sample tested in tension at 173 K (−100 °C) exhibited work hardening but the remaining samples tested at higher temperatures exhibited work softening. EBSD analysis of the crystalline phase after tensile testing provides insight into active deformation mechanisms in the crystalline phase. At 603 K (330 °C), the dendrites exhibit significant plastic strain, with the dendrites oriented {101} parallel to the loading direction exhibiting the least amount of strain. Schmid factor analysis leads to the hypothesis that {110}〈111〉 dislocation mechanisms are active at this temperature. Additionally, measurements of dendrite shape as a function of macroscopic strain state in the tension experiments provide insight into cooperative deformation mechanisms in the composite. At low temperatures, the fracture toughness of the notch toughness samples exceeded that of fatigue precracked samples; but at and above room temperature, the toughness values of notched and fatigue precracked samples converge. These observations are rationalized based on the changes to the flow and fracture behavior of the glass and the crystalline phases over this temperature range. At low temperatures, the crystalline phase is sensitive to defects and changes in stress state that reduce its energy absorbing ability. At higher temperatures, both constituents possess lower strength and are less sensitive to defects, enabling more significant crack tip blunting in the fatigue precracked samples. This produces toughness values that are similar to those obtained for the notched samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. W.H. Wang, C. Dong, and C.H. Shek: Mater. Sci. Eng. R, 2004, vol. 44, pp. 45–89.10.1016/j.mser.2004.03.001 ↗
2. J. F. Loffler: Intermetallics, 2003, vol. 11, pp. 529–40.10.1016/S0966-9795(03)00046-3 ↗
3. M.M. Trexler and N.N. Thadhani: Prog. Mater. Sci., 2010, vol. 55, pp. 759–839.10.1016/j.pmatsci.2010.04.002 ↗
4. A. H. Vormelker, O. L. Vatamanu, L. Kecskes, and J. J. Lewandowski: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1922–34.10.1007/s11661-007-9410-4 ↗
5. C. Fan, Y.F. Gao, H.Q. Li, H. Choo, P.K. Liaw, A. Inoue, and C.T. Liu: J. Mater. Res., 2007, vol. 22, pp. 445–52.10.1557/jmr.2007.0054 ↗
6. M. D. Demetriou, M. E. Launey, G. Garrett, J. P. Schramm, D. C. Hofmann, W. L. Johnson, and R. O. Ritchie: Nat. Mater., 2011, vol. 10, pp. 123–28.10.1038/nmat2930 ↗
7. C. C. Hays, C. P. Kim, and W. L. Johnson: Phys. Rev. Lett., 2000, vol. 84, pp. 2901–4.10.1103/PhysRevLett.84.2901 ↗
8. F. Szuecs, C. P. Kim, and W. L. Johnson: Acta Mater., 2001, vol. 49, pp. 1507–13.10.1016/S1359-6454(01)00068-4 ↗
9. D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind, M.D. Demetriou, and W.L. Johnson: Nature, 2008, vol. 451, pp. 1085–89.10.1038/nature06598 ↗
10. H. A. Hassan, A. B. El-Shabasy, and J. J. Lewandowski: Mater. Sci. Eng. A, 2012, vol. 540, pp. 97–101.10.1016/j.msea.2012.01.096 ↗
11. J. J. Lewandowski, M. Shazly, and A. Shamimi Nouri: Scr. Mater., 2006, vol. 54, pp. 337–41.10.1016/j.scriptamat.2005.10.010 ↗
12. J.A. Booth: M.S. Thesis, Case Western Reserve University, 2014.
13. A. V. Samant and J. J. Lewandowski: Metall. Mater. Trans. A, 1997a, vol. 28A, pp. 389–399.10.1007/s11661-997-0140-4 ↗
14. Aerospace Structural Metals Database: Non-Ferrous Alloys-Ti-B120VCA, CINDAS LLC, West Lafayette IN, 1984.
15. American Society for Testing and Materials: ASTM E562-11: Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count, 2011, pp. 621–27.
16. C.W. Corti, P. Cotterill, and G.A. Fitzpatrick: Int. Metall. Rev., 1974, vol. 19, pp. 77–88.10.1179/095066074790137088 ↗
17. American Society for Testing and Materials: ASTM-E8-04: Standard Test Methods for Tension Testing of Metallic Materials, American Society for Testing and Materials, West Conshohocken, PA, 2011.
18. H. A. Hassan, L. Kecskes, and J.J. Lewandowski: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2077–85.10.1007/s11661-008-9549-7 ↗
19. J.K. Mason and C.A. Schuh: in Electron Backscatter Diffraction Materials Science, A.J. Schwartz, M. Kumar, B.L. Adams, and D.P. Field, eds., Springer US, 2009, pp. 35–51.10.1007/978-0-387-88136-2_3 ↗
20. F. Cao, E.K. Cerreta, C.P. Trujillo, and G.T. Gray: Acta Mater., 2008, vol. 56, pp. 5804–17.10.1016/j.actamat.2008.07.054 ↗
21. U. F. Kocks, C.N. Tome, and H.R. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge Univ Press, New York, NY, 2000.
22. L. Rocha, L. Velho, and P.C.P Carvalho: 2002 Proceedings of the XV Brazil Symposium on Computer Graphics and Image Processing, IEEE, 2002, pp. 99–105.
23. American Society for Testing and Materials: ASTM E399-09: Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials, American Society for Testing and Materials, West Conshohocken, PA, 2009.
24. M.Q. Jiang, G. Wilde, and L.H. Dai: Mech. Mater., 2015, vol. 81, pp. 72–83.10.1016/j.mechmat.2014.10.002 ↗
25. P. Lowhaphandu and J.J. Lewandowski: Scr. Mater., 1998, vol. 38, pp. 1811–17.10.1016/S1359-6462(98)00102-X ↗
26. A. V. Samant and J. J. Lewandowski: Metall. Mater. Trans. A, 1997b, vol. 28, pp. 2297–2307.10.1007/s11661-997-0187-2 ↗
27. D. Padhi and J. J. Lewandowski: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 967–78.10.1007/s11661-003-0226-6 ↗
28. R. Varadarajan, A. Thurston, and J.J. Lewandowski: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 149–58.10.1007/s11661-009-0059-z ↗
29. P. Lowhaphandu, S.L. Montgomery, and J.J. Lewandowski: Scr. Mater., 1999, vol. 41, pp. 19–24.10.1016/S1359-6462(99)00128-1 ↗
30. D.C. Hofmann: J. Mater., 2013, vol. 2013, p. 517904.
31. Junwei Qiao, Haoling Jia, and Peter K. Liaw: Mater. Sci. Eng. R Rep., 2016, vol. 100, pp. 1–69.10.1016/j.mser.2015.12.001 ↗
32. J.A. Kolodziejska, H. Kozachkov, K. Kranjc, A. Hunter, E. Marquis, W.L. Johnson, K.M. Flores, and D.C. Hofmann: Sci. Rep., 2016, vol. 6, p. 22563.10.1038/srep22563 ↗
33. M. G. Mendiratta, R. Goetz, D. M. Dimiduk, and J. J. Lewandowski: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1767–76.10.1007/BF02670764 ↗
34. R. T. Begley and J. H. Bechtold: J. Common Met., 1961, vol. 3, pp. 1–12.10.1016/0022-5088(61)90037-6 ↗
35. J. Kajuch, J. Short, and J. J. Lewandowski: Acta Metall. Mater., 1995, vol. 43, pp. 1955–67.10.1016/0956-7151(94)00391-T ↗
36. A.J. Schwartz, M. Kumar, B.L. Adams, and D.P. Field: Electron Backscatter Diffraction in Materials Science, 2nd edn, Springer, New York (2009)10.1007/978-0-387-88136-2 ↗
37. R. L. Narayan, P. S. Singh, D. C. Hofmann, N. Hutchinson, K. M. Flores, and U. Ramamurty: Acta Mater., 2012, vol. 60, pp. 5089–5100.10.1016/j.actamat.2012.06.032 ↗
38. Surya R. Kalidindi, Stephen R. Niezgoda, and Ayman A. Salem: JOM, 2011, vol. 63, pp. 34–41.10.1007/s11837-011-0057-7 ↗
39. T.C. Hufnagel, U.K. Vempati, and J.D. Almer: PLoS ONE, 2013, vol. 8, e83289.10.1371/journal.pone.0083289 ↗
40. P Staron, T. Fischer, T. Lippmann, A. Stark, S. Daneshpour, D. Schnubel, E. Uhlmann, R. Gerstenberger, B. Camin, W. Reimers, E. Eidenberger, H. Clemens, N. Huber, and A. Schreyer: Adv. Eng. Mater., 2011, vol. 13, pp. 658–63.10.1002/adem.201000297 ↗
41. J. Yi, M.S. Seifi, W. Wang, and J. J. Lewandowski: J. Mater. Sci. Technol., 2014, vol. 30, pp. 627–30.10.1016/j.jmst.2014.04.017 ↗
42. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., Wiley, New York, 1996.