journal article·2017-06

Relationships Between Smelter Grade Alumina Characteristics and Strength Determined by Nanoindentation and Ultrasound-Mediated Particle Breakage

Hasini Wijayaratne, Grant McIntosh, Margaret Hyland, Linus Perander, James Metson

Publisher page

Abstract

The mechanical strength of smelter grade alumina (SGA) is of considerable practical significance for the aluminum reduction process. Attrition of alumina during transportation and handling generates an increased level of fines. This results in generation of dust, poor flow properties, and silo segregation that interfere with alumina feeding systems. These lead to process instabilities which in turn result in current efficiency losses that are costly. Here we are concerned with developing a fundamental understanding of SGA strength in terms of its microstructure. Nanoindentation and ultrasound-mediated particle breakage tests have been conducted to study the strength. Strength of SGA samples both industry calcined and laboratory prepared, decrease with increasing α-alumina (corundum) content contrary to expectation. The reducing strength of alumina with increasing degree of calcination is attributed to the development of a macroporous and abrasion-prone microstructure resulting from the ‘pseudomorphic’ transformation of precursor gibbsite during the calcination process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bauxite Residue and Utilization · Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. World Aluminium: http://www.world-aluminium.org/statistics/alumina-production/#data, (2016). Accessed 10 October 2016.
2. F. Yen, P. Cheng, H. Huang, T. Lin, Journal of American Ceramic Society, 2009, vol. 92, pp. 2089-2092.10.1111/j.1551-2916.2009.03160.x ↗
3. J. Metson, P. Lavoie, L. Perander, R. Etzion, Chemistry in New Zealand, 2010, vol. 74, pp. 96-100.
4. K. Wefers, C. Misra, Oxides and Hydroxides of Aluminium, Alcoa Laboratories, New York, 1987.
5. B. Whittington, D. Ilievski, Chemical Engineering Journal, 2004, vol. 98, pp. 89-97.10.1016/S1385-8947(03)00207-9 ↗
6. L.M. Perander, Evolution of Nano and Microstructure During the Calcination of Bayer Gibbsite. PhD Thesis, The University of Auckland, 2010.
7. V.J. Ingram-Jones, R.C.T. Slade, T.W. Davies, J.C. Southern, S. Salvador, Journal of Materials Chemistry, 1996, vol. 6, pp. 73-79.10.1039/jm9960600073 ↗
8. K. Yamada, T. Harato, S. Hamano, K. Horinouchi, Light Metals, TMS, Warrendale, 1984.
9. M.F. Peintinger, M.J. Kratz, T. Bredow, Journal of Materials Chemistry A, 2014, vol.2, pp. 13143-13158.10.1039/C4TA02663B ↗
10. L.M. Perander, J.B. Metson, C. Klett, Light Metals, TMS, San Diego, 2011. pp. 151-154.
11. S. Chandrashekar, D. Jackson, J. Kisler: Proc. of the 7th International Alumina Quality Workshop, 2005.
12. W.L. Forsythe, W.R. Hertwig, Industrial and Engineering Chemistry, 1949, vol. 41, pp. 1200-1206.10.1021/ie50474a015 ↗
13. L.T. Kristiansen, A.K. Prytz, E. Tveten: Proc. of the 9th International Alumina Quality Workshop, 2012.
14. J.V. Sang, Essential Readings in Light Metals, Wiley, Hoboken, 2013, pp. 740-746.10.1002/9781118647868.ch102 ↗
15. S. Wind, C. Jensen-Holm, B.E. Raahauge, Development of Particle Breakdown and Alumina Strength During Calcination. In: D. Donaldson, B. Raahauge (eds) Essential Readings in Light Metals, Wiley, Hoboken, 2013, pp. 757-764.10.1002/9781118647868.ch104 ↗
16. A. Saatci, H.-W. Schmidt, W. Stockhausen, M. Stroder, P. Strum, Light Metals, TMS, 2004, pp. 81–86.
17. [17] P. Zhang, S.X. Li, Z.F. Zhang, Materials Science and Engineering A, 2011, vol. 529, pp. 62-73.10.1016/j.msea.2011.08.061 ↗
18. G.I. Roach, J.B. Cornell, B.J. Griffin, Light Metals, TMS, Warrendale, 1998, pp. 153-158.
19. S. Brunauer, P.H. Emmett, E. Teller, J. Am. Chem. Soc., 1938, vol. 60, pp. 309-319.10.1021/ja01269a023 ↗
20. E.P. Barrett, L.G. Joyner, P.P. Halenda, J. Am. Chem. Soc., 1953, vol. 73, pp. 373-380.10.1021/ja01145a126 ↗
21. P. Kippax, Paint and Coatings Industry Magazine, (2005).
22. M.E. Dickinson, J.P. Schirer, Materials Today, 2009, vol.12, pp. 46-50.10.1016/S1369-7021(09)70202-0 ↗
23. [23] M.L. Oyen, R.F. Cook, Journal of Mechanical Behavior of Biomedical Materials, 2009, vol.2, pp. 396-407.10.1016/j.jmbbm.2008.10.002 ↗
24. W.C. Oliver, G.M. Pharr, Journal of Materials Research, 1992, vol.7, pp.1564-1583.10.1557/JMR.1992.1564 ↗
25. A.C. Fischer-Cripps, Nanoindentation, Springer, New York, 2004.10.1007/978-1-4757-5943-3 ↗
26. W.C. Oliver, G.M. Pharr, Journal of Materials Research, 2004, vol.19, pp. 3-20.10.1557/jmr.2004.19.1.3 ↗
27. J.E. Bradby, S.O. Kucheyev, J.S. Williams, J. Wong-Leung, Applied Physics Letters, 2002, vol. 80, pp. 383-385.10.1063/1.1436280 ↗
28. A. Dey, A.K. Mukhopadhyay, Nanoindentation of Brittle Solids, CRC Press Taylor & Francis Group, Baton Raton, 2014.10.1201/b17110 ↗
29. A. Mikowski, P. Soares, F. Wypych, C.M. Lepienski, American Mineralogist, 2008, vol. 93, pp. 844-852.10.2138/am.2008.2694 ↗
30. C. Fizanne-Michel, M. Cornen, P. Castany, I. Péron, T. Gloriant, Materials Science and Engineering A, 2014 vol. 613, pp. 159-162.10.1016/j.msea.2014.06.098 ↗
31. NanoScience Instruments: http://www.nanoscience.com/technology/mechanical-testing-technology/mechanical-properties/elastic-modulus-and-hardness/, (2016). Accessed 17 October 2016.
32. [32] H.N. Pham, L. Nowichi, J. Xu, A.K. Datye, Industrial and Engineering Chemistry Research, 2003, vol. 42, pp. 4001-4008.10.1021/ie020875h ↗
33. T.E. Buchheit, T.J. Vogler, Mechanics of Materials, 2010, vol 42, pp. 599-614.10.1016/j.mechmat.2010.02.007 ↗
34. J. Echigoya, T. Hyakubu, Z.T. Liu, K. Sasaki, H. Sutu, Surface and Coatings Technology, 1994, vol. 67, pp.111-117.10.1016/S0257-8972(05)80034-9 ↗
35. [35] A. Krell, S. Schadlich, Materials Science and Engineering A, 2001, vol. 307, pp. 172-181.10.1016/S0921-5093(00)01818-9 ↗
36. L.M. Perander, M.A. Stam, M.M. Hyland, J.B. Metson, Light Metals, TMS, Warrendale, 2011, pp. 285- 290.