journal article·2016-09

Low-Temperature Bonding of Bi0.5Sb1.5Te3 Thermoelectric Material with Cu Electrodes Using a Thin-Film In Interlayer

Yan-Cheng Lin, Chung-Lin Yang, Jing-Yi Huang, Chao-Chi Jain, Jen-Dong Hwang, Hsu-Shen Chu, Sheng-Chi Chen, Tung-Han Chuang

Publisher page

Abstract

A Bi0.5Sb1.5Te3 thermoelectric material electroplated with a Ni barrier layer and a Ag reaction layer was bonded with a Ag-coated Cu electrode at low temperatures of 448 K (175 °C) to 523 K (250 °C) using a 4-μm-thick In interlayer under an external pressure of 3 MPa. During the bonding process, the In thin film reacted with the Ag layer to form a double layer of Ag3In and Ag2In intermetallic compounds. No reaction occurred at the Bi0.5Sb1.5Te3/Ni interface, which resulted in low bonding strengths of about 3.2 MPa. The adhesion of the Bi0.5Sb1.5Te3/Ni interface was improved by precoating a 1-μm Sn film on the surface of the thermoelectric element and preheating it at 523 K (250 °C) for 3 minutes. In this case, the bonding strengths increased to a range of 9.1 to 11.5 MPa after bonding at 473 K (200 °C) for 5 to 60 minutes, and the shear-tested specimens fractured with cleavage characteristics in the interior of the thermoelectric material. The bonding at 448 K (175 °C) led to shear strengths ranging from 7.1 to 8.5 MPa for various bonding times between 5 and 60 minutes, which were further increased to the values of 10.4 to 11.7 MPa by increasing the bonding pressure to 9.8 MPa. The shear strengths of Bi0.5Sb1.5Te3/Cu joints bonded with the optimized conditions of the modified solid–liquid interdiffusion bonding process changed only slightly after long-term exposure at 473 K (200 °C) for 1000 hours.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Electronic Packaging and Soldering Technologies · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. H. Zhang, H.Y. Jing, Y.D. Han, L.Y. Xu, and G-Q. Lu: J. Alloys Compd., 2013, vol. 576, pp. 424-431.10.1016/j.jallcom.2013.05.129 ↗
2. P.Y. Chien, C.H. Yeh, H.H. Hsu, and Albert T. Wu: J. Electron. Mater., 2014, vol. 43, pp. 284-289.10.1007/s11664-013-2877-4 ↗
3. M. Weinstein, and A.I. Mlavsky: Rev. Sci. Instruments, 1962, vol. 33, pp. 1119-1120.10.1063/1.1717707 ↗
4. R. Zybala, K.T. Wojciechowski, M. Schmidt, and R. Mania: Materialy Ceramiczne/Ceramic Mater., 2010, vol. 62, pp. 481-485.
5. J. Fan, L. Chen, S. Bai, X. Shi: Mater. Lett., 2004, vol. 58, pp. 3876-3878.10.1016/j.matlet.2004.07.041 ↗
6. D.G. Zhao, X.Y. Li, L. He, W. Jiang, and L.D. Chen: J. Alloys Compd., 2009, vol. 477, pp. 425-431.10.1016/j.jallcom.2008.10.037 ↗
7. D.G. Zhao, H. Geng, X. Teng: J. Alloys Compd., 2012, vol. 517, pp. 198-203.10.1016/j.jallcom.2011.12.130 ↗
8. H. Xia, F. Drymiotis, C.L. Chen, A. Wu, G. J. Snyder: J. Mater. Sci., 2014, vol. 49, pp. 1716-1723.10.1007/s10853-013-7857-9 ↗
9. D.M. Jacobson, and G. Humpston: Solder. Surf. Mt. Tech., 1992, vol. 4, pp. 27-32.10.1108/eb037777 ↗
10. T.H. Chuang, H.J. Lin, and C.W. Tsao: J. Electron. Mater., 2006, vol. 35, pp. 1566-1570.10.1007/s11664-006-0150-9 ↗
11. M.W. Liang, T.E. Hsieh, S.Y. Chang, and T.H. Chuang: J. Electron. Mater., 2003, vol. 32, pp. 952-956.10.1007/s11664-003-0229-5 ↗
12. W.C. Welch, J. Chae and K. Najafi: IEEE Trans. Adv. Packag., 2005, vol. 28, pp. 643-649.10.1109/TADVP.2005.859356 ↗
13. R. I. Made, C.L. Gan, L.L.Yan, A. Yu, S.W. Yoon, J.H. Lau, and C.K. Lee: J. Electron. Mater., 2009, vol. 38, pp. 365-371.10.1007/s11664-008-0555-8 ↗
14. J.F. Li, P.A. Agyakwa and C.M. Johnson: Acta Mater., 2010, vol. 58, pp. 3429-3443.10.1016/j.actamat.2010.02.018 ↗
15. L.L.Yan, C.K.Lee, D.Q.Yu, A.B.Yu, W.K.Choi, J.H.Lau, and S.U.Yoon: J. Electron. Mater., 2009, vol. 38, pp. 200-207.10.1007/s11664-008-0561-x ↗
16. J.Y. Chang, R.S. Cheng, K.S. Kao, T.C. Chang, and T.H. Chuang: IEEE Trans. Compon. Packag. Manufact. Technolog., 2012, vol. 6, pp.679-984.
17. T.H. Chuang, H.J. Lin, C.H. Chuang, W.T. Yeh, J.D. Hwang, and H.S. Chu: J. Electron. Mater., 2014, vol. 43, pp.4610-4618.10.1007/s11664-014-3430-9 ↗
18. C.L. Yang, H.J. Lai, J.D. Hwang, and T.H. Chuang: J. Electron. Mater., 2013, vol. 42, pp. 359-365.10.1007/s11664-012-2345-6 ↗
19. C.-H. Chuang, Y.-C. Lin, and C.-W Lin: Met., 2016, vol. 6, art no. 92, DOI:10.3390/met6040092.10.3390/met6040092 ↗
20. T.H. Chuang, W.T. Yeh, C.H. Chuang, and J.D. Hwang: J. Alloy Compd., 2014, vol. 613, pp. 46-54.10.1016/j.jallcom.2014.06.020 ↗
21. T.M. Ritzer, P.G. Lau and A.D. Bogard: in Proceedings of the 16th International Conference Thermoelectrics, Dresden, Germany, 1997, pp. 619–23.
22. C.L. Yang, H.J. Lai, J.D. Hwang, and T.H. Chuang: J. Mater. Eng. Perform., 2013, vol. 22, pp. 2029-2037.10.1007/s11665-013-0487-1 ↗
23. IPC-TM-650 Test Methods Manual, TM2.4.42.2., Die shear strength, The Inst. Intercon. And Pack. Electron. Circuits, 2215 Sanders Rd., Northbrook, IL 60062-6135.
24. S. Bader, W. Gust, and H. Hieber: Acta Metall. Mater., 1995, vol. 43, pp. 329-337.
25. S.W. Chen and C.N. Chiu: Scripta Mater., 2007, vol. 56, pp. 97-99.10.1016/j.scriptamat.2006.09.018 ↗
26. C.N. Chiu, C.H. Wang, and S.W. Chen: J. Electron. Mater., 2007, vol. 37, pp. 40-44.10.1007/s11664-007-0264-8 ↗