journal article·2016-07

Failure Orientation in Stretch Forming and Its Correlation with a Polycrystal Plasticity-Based Material Model for a Collection of Highly Formable Sheet Steels

Yuguo An, Romke Boterman, Eisso Atzema, Michael Abspoel, Marc Scholting

Publisher page

Abstract

Robust design optimization techniques have been developed in recent years within the automotive industry with the aim of reducing scrap rates and improving process stability in sheet metal forming. These new techniques are able to take process variations and other sources of material scatter into account. Among the many material variables and inputs used, the yield criterion is an important aspect and this is used to describe the plastic behavior of sheet metals. To achieve a reliable output in an optimization study, the yield criterion selected must be representative of material response and scatter. However, simple material models that deviate from real material behavior are often used due to a lack of material data, which is usually a requirement when using more complex models. In the present research, a polycrystal plasticity-based CTFP model has been evaluated in stretch forming for a collection of highly formable sheet steel materials. The results demonstrate that the CTFP model can capture the yielding character and also detect the minor deviations presented by different coils. The stretching factor derived from the CTFP model, as opposed to the work hardening and ductility, has a dominant effect on failure for a collection of materials with similar mechanical properties. Results also indicate that plastic deformation causes texture evolution and, consequently, an evolving yield locus. Such changes in the yield locus during deformation have an effect on stretching and friction calibration in FE simulations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. S.P. Keeler: Ph.D thesis, Massachusetts Institute of Technology, Cambridge, 1961.
2. Banabic D (2010) Sheet Metal Forming Processes: Constitutive Modelling and Numerical Simulation. Springer, Berlin10.1007/978-3-540-88113-1 ↗
3. 3. Beyer, H.G., Sendhoff, B., 2007. Computer Methods in Applied Mechanics and Engineering 196, 3190–3218.10.1016/j.cma.2007.03.003 ↗
4. J. Marczyk: NAFEMS World Congress, Rhode Island, 1999.
5. 5. De Souza, T., Rolfe, B., 2008. Materials Processing Technology 203, 1–12.10.1016/j.jmatprotec.2007.09.075 ↗
6. M. Sigvant: Proc IDDRG 2006 Conf., Porto, Portugal (2006).
7. E. Atzema, H. Brouwer, and P. Kömmelt: Proceedings of the IDDRG 2006 Conference, Porto, 2006.
8. M. Abspoel, M. Scholting, and E. Atzema: Proceedings of the Forming Technology Forum 2011, Zurich, 2011.
9. 9. Gödel, V., Merklein, M., 2011. Material Forming 4,183–192.10.1007/s12289-010-1020-9 ↗
10. Aspenberg, D., Larsson, R., Nilsson, L., 2012. Materials Processing Technology 212, 1288–1297.10.1016/j.jmatprotec.2012.01.016 ↗
11. 11. Moreira, L., Ferron, G., 2004. Materials Processing Technology 155–156, 1596–1603.10.1016/j.jmatprotec.2004.04.269 ↗
12. 12. Hill, R., 1948. Proc. Royal Soc. London A 193, 281-297.10.1098/rspa.1948.0045 ↗
13. Dillamore IL (1974) J. Phys. D, Ser 7: 979-991.10.1088/0022-3727/7/7/306 ↗
14. 14. An, Y.G,. Vegter, H., Carless, L., Lambriks, M., 2011. Int. J. Plasticity 27 (11), 1758–1780.10.1016/j.ijplas.2011.05.003 ↗
15. 15. Hill, R., 1990. Journal of the Mechanics and Physics of Solids 38, 405–417.10.1016/0022-5096(90)90006-P ↗
16. 16. Barlat, F., Brem, J.C., Yoon, J.W., Chung, K., Dick, R.E., Lege, D.J., Pourboghrat, F., Choi, S.-H., Chu, E., 2003. International Journal of Plasticity 19, 1297–1319.10.1016/S0749-6419(02)00019-0 ↗
17. 17. Banabic, D., Aretz, H., Comsa, D.S., Paraianu, L., 2005. International Journal of Plasticity 21, 493-512.10.1016/j.ijplas.2004.04.003 ↗
18. 18. Barlat, F., Aretz, H., Yoon, J.W., Karabin, M.E., Brem, J.C., Dick, R.E., 2005. International Journal of Plasticity 21, 1009–1039.10.1016/j.ijplas.2004.06.004 ↗
19. D. Comsa, and D. Banabic: Numisheet, Interlaken, Switzerland, (2008).
20. 20. Vegter, H., van den Boogaard, A.H., 2006, Int. J. Plasticity 22, 557-580.10.1016/j.ijplas.2005.04.009 ↗
21. 21. Bergström, Y., 1969. Materials Science and Engineering 5, 179-192.
22. 22. Van Liempt, P., 1994. Journal of Materials Processing Technology 45, 459–464.10.1016/0924-0136(94)90382-4 ↗
23. H. Vegter: Ph.D thesis, University of Twente, 1991.
24. 24. von Mises, R., 1928. Z. Angew. Math. Mech. 8, 161-185.10.1002/zamm.19280080302 ↗
25. 25. Taylor, G.I., 1938. J. Inst. Metals 62, 307-324.
26. H. Honeff, and H. Mecking: Proc. Fifth International Conference on Textures of Materials, vol. 1, G. Gottstein, and K. Liicke, eds., Springer, Berlin, 1978, pp. 265–275.
27. P. Van Houtte: Proc. Sixth International Conference on Textures of Materials, S. Nagashima, ed., the Iron and Steel Institute of Japan, 1981, pp. 428–437.
28. P. Van Houtte: The “MTM-FHM” software system Version 2, Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, Belgium, 1995
29. 29. Molinari, A., Canova, G.R., Ahzi, S., 1987. Acta Metallurgica 35, 2983–2994.10.1016/0001-6160(87)90297-5 ↗
30. R.A. Lebensohn, and C.N. Tomè (1993) Acta Metall. et Mater. 41: 2611–262410.1016/0956-7151(93)90130-K ↗
31. 31. Kalidindi SR, Schoenfeld SE., 2000, Mater Sci Eng A; 293:120.10.1016/S0921-5093(00)01048-0 ↗
32. 32. Bate, P. Philo Trans R Soc Lond A 1999; 357:1589.10.1098/rsta.1999.0391 ↗
33. 33. Bate, P. S., An, Y. G., 2004. Scritpa Materialia 51, 973-77.10.1016/j.scriptamat.2004.07.018 ↗
34. 34. An, Y.G., Vegter, H., Elliott, L., Bottema, J., 2004. Aluminium 80, 674-79.
35. Y.G. An, E. Atzema, M. Workel, H. Vegter, L. Elliott, and J. Moerman: 1st International Conference on Super-high Strength Steels, Rome, 2005.
36. 36. Engler, O., An, Y. G., 2005. Solid State Phenomena 105, 277-283.10.4028/www.scientific.net/SSP.105.277 ↗
37. 37. Grytten, F., Holmedal, B., Hopperstad, O.S.and Borvik, T., 2008. Int. J. Plasticity 24, 2248-2277.10.1016/j.ijplas.2007.11.005 ↗
38. 38. Kraska, M., Doig, M., Tikhomirov, D., Raabe, D., Roters, F.; 2009, Computational Materials Science 46, 383-392.10.1016/j.commatsci.2009.03.025 ↗
39. Backofen W (1972) Deformation Processing. Addison-Wesley, Boston.
40. Y.G. An, and H. Vegter: The difference in plastic behaviour between bulging test and through thickness compression test for sheet steels and aluminium alloys. In: IDDRG Working Group Meeting, Genval, 1998.
41. 41. An, Y.G., Vegter, H., Elliott, L., 2004. A novel and simple method for the measurement of plane strain work hardening. Journal of Materials Processing Technology 155–156, 1616–1622.10.1016/j.jmatprotec.2004.04.344 ↗
42. An, Y.G., Vegter, H., 2005. Analytical and experimental study of frictional behaviour in through-thickness compression test. Journal of Material Processing Technology 160, 148–155.10.1016/j.jmatprotec.2004.05.026 ↗
43. 43. An, Y.G., Vegter, H., Heijne, J., 2009. Development of simple shear test for the measurement of work hardening. Journal of Materials Processing Technology 209, 4248–4254.10.1016/j.jmatprotec.2008.11.007 ↗
44. 44. Wiebenga, J.H., Atzema, E.H., An, Y.G., Vegter, H. van den Boogaard, A.H., 2014, Journal of Materials Processing Technology 214, 238– 252.10.1016/j.jmatprotec.2013.08.008 ↗
45. Dieka Manual: 2008 Version 9.2, University of Twente.
46. M. Abspoel, M. Scholting, and J. Droog (2013) J. Mater. Process. Technol. 213: 759–69.10.1016/j.jmatprotec.2012.11.022 ↗
47. Y.G. An, H. Vegter, H. Melzer, S. Romano, P. Triguero (2013) J Mater Process Technol 213: 1419–142510.1016/j.jmatprotec.2013.02.008 ↗