journal article·2016-05

Evaluation of Interfacial Interactions Between Ti-6Al-4V and Mold Use Ti-Added Backup Coat in Investment Casting

Xu Cheng, Lianjing Chai, Guoqing Wu, Hong Wang, Hai Nan

Publisher page

Abstract

In this article, the chemical inertness of shell using Ti-added mullite backup coat against molten Ti-6Al-4V (Ti64) alloy was investigated. The metal/shell interfacial microstructures and compositions were characterized using an optical microscope, scanning electron microscope, roughness tester, and X-ray diffractometer; the hardened layer thickness was evaluated using a microhardness tester. By adding titanium powder into the mullite backup coat, the alpha case and hardened layer thickness of the Ti64 castings were largely reduced with good surface finishing. Silicon ions, from the backup coat, penetrated into the alloy and coarsened the β lath at the metal/shell interfacial area. The Ti powder in the mullite backup coat oxidized and interacted with silica during mold firing and casting, which reduced the silicon and oxygen concentrations at the metal/shell interfacial area. The oxygen penetration depth is thicker than the alpha case layer thickness, and around 0.26 wt pct, oxygen can obviously coarsen the alpha lath at the metal/shell interfacial area during investment casting.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Additive Manufacturing Materials and Processes · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. M. Niinomi: Materials Science and Engineering: A, 1998, vol.243, pp. 231-236.10.1016/S0921-5093(97)00806-X ↗
2. L. Reclaru,J. M. Meyer: Journal of Dentistry, 1994, vol.22, pp. 159-168.10.1016/0300-5712(94)90200-3 ↗
3. C. Cui, B. Hu, L. Zhao,S. Liu: Materials & Design, 2011, vol.32, pp. 1684-1691.10.1016/j.matdes.2010.09.011 ↗
4. R. R. Boyer: Materials Science and Engineering: A, 1996, vol.213, pp. 103-114.10.1016/0921-5093(96)10233-1 ↗
5. A. Mitchell: Materials Science and Engineering: A, 1998, vol.243, pp. 257-262.10.1016/S0921-5093(97)00810-1 ↗
6. R. L. Saha, T. K. Nandy, R. D. K. Misra,K. T. Jacob: Metallurgical Transactions B, 1990, vol.21, pp. 559-566.10.1007/BF02667869 ↗
7. S.-Y. Sung,Y.-J. Kim: Materials Science and Engineering: A, 2005, vol.405, pp. 173-177.10.1016/j.msea.2005.05.092 ↗
8. Y. Guilin, L. Nan, L. Yousheng,W. Yining: The Journal of Prosthetic Dentistry, 2007, vol.97, pp. 157-164.10.1016/j.prosdent.2007.01.005 ↗
9. G. Bernard-Granger, C. Guizard,L. San-Miguel: Journal of the American Ceramic Society, 2007, vol.90, pp. 2698-2702.10.1111/j.1551-2916.2007.01759.x ↗
10. G. A. Gogotsi: Refractories, 1993, vol.34, pp. 539-547.10.1007/BF01292734 ↗
11. C. Yuan,S. Jones: Journal of the European Ceramic Society, 2003, vol.23, pp. 399-407.10.1016/S0955-2219(02)00153-X ↗
12. C. Yuan, X. Cheng, G. S. Holt, D. Shevchenko,P. A. Withey: Ceramics International, 2015, vol.41, pp. 4129-4139.10.1016/j.ceramint.2014.11.109 ↗
13. B.-J. Choi, S. Lee,Y.-J. Kim: Journal of Materials Engineering and Performance, 2014, vol.23, pp. 1415-1423.10.1007/s11665-013-0859-6 ↗
14. C. Yuan, D. Compton, X. Cheng, N. Green,P. Withey: Journal of the European Ceramic Society, 2012, vol.32, pp. 4041-4049.10.1016/j.jeurceramsoc.2012.06.010 ↗
15. X. Cheng, C. Yuan, D. Shevchenko,P. Withey: Materials Chemistry and Physics, 2014, vol.146, pp. 295-302.10.1016/j.matchemphys.2014.03.026 ↗
16. C. Yuan, X. Cheng,P. A. Withey: Materials Chemistry and Physics, 2015, vol.155, pp. 205-210.10.1016/j.matchemphys.2015.02.026 ↗
17. X. Cheng, X. D. Sun, C. Yuan, N. R. Green,P. A. Withey: Intermetallics, 2012, vol.29, pp. 61-69.10.1016/j.intermet.2012.05.005 ↗
18. B. J. Choi, S. Lee,Y. J. Kim: Materials Science and Technology, 2013, vol.29, pp. 1453-1462.10.1179/1743284713Y.0000000296 ↗
19. G. Lütjering, J. C. Williams: Titanium, 2nd ed., Springer-Verlag, Berlin, 2007, p. 24.
20. W. J. Boettinger, M. E. Williams, S. R. Coriell, U. R. Kattner,B. A. Mueller: Metallurgical and Materials Transactions B, 2000, vol.31, pp. 1419-1427.10.1007/s11663-000-0026-y ↗
21. K. S. Chan, M. Koike, B. W. Johnson,T. Okabe: Metallurgical and Materials Transactions A, 2008, vol.39, pp. 171-180.10.1007/s11661-007-9406-0 ↗
22. R. Gaddam, B. Sefer, R. Pederson,M.-L. Antti: Materials Characterization, 2015, vol.99, pp. 166-174.10.1016/j.matchar.2014.11.023 ↗