journal article·2016-04

Multi-stage Modeling of Lüders Elongation and Work-Hardening Behaviors of Ferrite Steels Under Tension

Zhongyang Zhang, Yiliang Liao

Publisher page

Abstract

For structural and engineering steels, accurate modeling of stress–strain relation of ferrite phase is of particular importance, since the modeling results could benefit new material system design and process-microstructure-property analysis. Several modeling efforts have been made to achieve this target. However, few efforts have been put on the Luders elongation behavior of ferrite. As a result, the modeling results from proposed models do not match well with experimental data, particularly at a relatively low-strain range. Furthermore, without the consideration of yield point elongation due to the formation of Luders bands, additional calibration parameters are required to capture the stress level of stress–strain curves. In this work, a multi-stage model is developed to predict the stress–strain relation of ferrite phase steel under room temperature tension. This model is capable of capturing the grain size effect on both Luders elongation and work-hardening behaviors of ferrite. The modeling results are extensively validated by experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. JH. Hollomon, Trans Am Inst Mining Metall Eng, 162 (1945) 268.
2. E. Voce, J Inst Met, 74 (1948) 537.
3. H.W. Swift, J Mech Phys Solids, 1 (1952) 1.10.1016/0022-5096(52)90002-1 ↗
4. L. Ratke, P.I. Welch, Z Metallkd, 74 (1983) 226–32.
5. Y. Estrin, H. Mecking, Acta Metall Mater, 32 (1984) 57–70.10.1016/0001-6160(84)90202-5 ↗
6. H. Mecking, U.F. Kocks, Acta Metall Mater, 29 (1981) 1865–75.10.1016/0001-6160(81)90112-7 ↗
7. U.F. Kocks, J Eng Mater-T Asme, 98 (1976) 76–85.10.1115/1.3443340 ↗
8. Y. Bergstrom, Mater Sci Eng, 5 (1969) 193.10.1016/0025-5416(70)90081-9 ↗
9. U.F. Kocks, Philos Mag, 13 (1966) 541–66.10.1080/14786436608212647 ↗
10. I. Gutierrez, M.A. Altuna, Acta Mater, 56 (2008) 4682–90.10.1016/j.actamat.2008.05.023 ↗
11. J. Bouquerel, K. Verbeken, B.C. de Cooman, Acta Mater, 54 (2006) 1443–56.10.1016/j.actamat.2005.10.059 ↗
12. M.M. Petite: Ph.D. Thesis, University of Navarra, Donostia-San Sebastián, 1999.
13. R. Rodriguez, I. Gutierrez, Mater Sci Forum, 426-4 (2003) 4525–30.10.4028/www.scientific.net/MSF.426-432.4525 ↗
14. W.B. Morrision, Trans ASM, 59 (1966) 824.
15. J.F. Butler, Journal of the Mechanics and Physics of Solids, 10 (1962) 313–18.10.1016/0022-5096(62)90003-0 ↗
16. G.T. Hahn, Acta Metall Mater, 10 (1962) 727–38.10.1016/0001-6160(62)90041-X ↗
17. W.G. Johnston, J.J. Gilman, J Appl Phys, 30 (1959) 129–44.10.1063/1.1735121 ↗
18. D.F. Stein, J.R. Low, J Appl Phys, 31 (1960) 362–69.10.1063/1.1735574 ↗
19. W.G. Johnston, J Appl Phys, 33 (1962) 2716–30.10.1063/1.1702538 ↗
20. W. Sylwestrowicz, E.O. Hall, Proceedings of the Physical Society. Section B, 64 (1951) 495.10.1088/0370-1301/64/6/305 ↗
21. J. Winlock, Trans. AIME, 197 (1953) 797–803.
22. D.J. Dingley, D. Mclean, Acta Metall Mater, 15 (1967) 885–901.10.1016/0001-6160(67)90371-9 ↗
23. F.B. Pickering and T. Gladman: Special report No. 81, Metallurgical Developments in Carbon Steels, Iron and Steel Institute, London, 1963.
24. F.B. Pickering, Physical metallurgy and the design of steels, London: Applied Science, 1978, pp. 10.
25. M. Enomoto, E. Furubayashi, Scripta Metall Mater, 13 (1979) 113–17.10.1016/0036-9748(79)90047-4 ↗
26. N. Tsuchida, H. Masuda, Y. Harada, K. Fukaura, Y. Tomota, K. Nagai, Mat Sci Eng a-Struct, 488 (2008) 446–52.10.1016/j.msea.2007.11.047 ↗