Modified Railway Wheel Steels: Production and Evaluation of Mechanical Properties with Emphasis on Low-Cycle Fatigue Behavior
Source abstract
Abstract
Railway wheels are exposed to high mechanical and thermal loads. The objective of this study has been to develop wheels that are more resistant to damage from these loads. Fourteen different materials have been produced in the form of full-scale railway wheels. Parameters that have been varied include the chemical composition, production processes, and heat treatment. The materials have been investigated microstructurally and by hardness, tensile, and impact toughness testing. In addition, the low-cycle fatigue (LCF) behavior has been characterized at room temperature and at subzero temperatures. The results indicate improvement in microstructure and mechanical properties for some materials and it is probable that these materials would endure better in service.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Mechanical Engineering and Vibrations Research · Railway Engineering and Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. R. Lundén: Wear, 1991, vol. 144, pp. 57–70.10.1016/0043-1648(91)90006-G ↗
2. J. Ahlström and B. Karlsson: Wear, 1999, vol. 232 (1), pp. 1–14.10.1016/S0043-1648(99)00166-0 ↗
3. J. Ahlström and B. Karlsson: Wear, 1999, vol. 232 (1), pp. 15–24.10.1016/S0043-1648(99)00167-2 ↗
4. J. Ahlström and B. Karlsson: Fatigue ‘99, Beijing, China, 1999, pp. 2609–14.
5. J.W. Spretnak, M.G. Fontana, and H.E. Brooks: Trans. ASM, 1951, vol. 43, pp. 547–70.
6. B.S. Shul’ginov and V.V. Matreyev: Int. J. Fatigue, 1997, vol. 19 (8–9), pp. 621–27.10.1016/S0142-1123(97)00066-2 ↗
7. R.I. Stephens: Fatigue at Low Temperatures, ASTM, Philadelphia, PA, 1985, pp. 140–60.10.1520/STP32752S ↗
8. J. Ahlström and B. Karlsson: Proc. EUROMAT 2000, Elsevier, 2000, pp. 1021–26.
9. J. Ahlström and B. Karlsson: Proc. 9th Int. Fatigue Cong., Atlanta, GA, 2006, paper FT180, 10 pp.
10. J. Ahlström: Doctoral Thesis, Department of Engineering Metals, Chalmers University of Technology, Göteborg, Sweden, 2001, 160 pp.
11. “UIC Standard 812-3 for Testing of Monoblock Wheels,” UIC Code, International Union of Railways, Paris.
12. “ASTM E112-96 Standard Test Methods for Determining Average Grain Size,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2001, vol. 03.01.
13. N. Köppen and B. Karlsson: 2007, unpublished research.
14. J. Ahlström and B. Karlsson: Wear, 2005, vol. 258 (7–8), pp. 1187–93.10.1016/j.wear.2004.03.030 ↗
15. M.E.K. Mirsch: Master Thesis. Department of Materials Science and Engineering, Chalmers University of Technology, Göteborg, Sweden, 2003, 100 pp.
16. J. Ahlström, B. Karlsson, and M. Mirsch: Proc. 11th Int. Conf. Fracture, Turin, Italy, 2005, 6 pp.
17. C. Temmel, B. Karlsson, and N.-G. Ingesten: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2995–3007.10.1007/s11661-006-0181-0 ↗
18. H. Hosseini, C. Temmel, B. Karlsson, and N.-G. Ingesten: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 982–89.10.1007/s11661-007-9122-9 ↗
19. C. Temmel, B. Karlsson, and N.-G. Ingesten: 2008, Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1132–44.10.1007/s11661-008-9467-8 ↗