The Effect of Nonuniform Chemistry on Interfacial Fracture Toughness
Source abstract
Abstract
The adhesion of metallic-ceramic interfaces is generally ascribed to the mixture of several mechanisms, including chemical bonding, texture, strain transfer, and plasticity. This study examines the impact of alterations in chemical bonding along an interface on the nanometer scale on the interfacial fracture energy. Using a well-characterized system of W/SiO2, small areas of the interface were masked with polymer tubes to prohibit the area from adhering well to the W film. This showed that the interfacial fracture energy was proportional to the area of higher adhesion. This finding was then used to study the growth of a Ti interlayer used for adhesion promotion in a Pt/SiO2 system. Because the adhesion energy slowly grew from values near the Pt/SiO2 to values typical of Ti/SiO2, the growth mechanism for DC magnetron sputtering of thin film Ti on SiO2 was inferred to be island growth instead of layer-by-layer growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Facial Trauma and Fracture Management · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. A.A. Volinsky, N.R. Moody, and W.W. Gerberich: Acta Mater., 2002, vol. 50, pp. 441–6610.1016/S1359-6454(01)00354-8 ↗
2. U. Kang, T. Lee, and Y.-H. Kim: Jpn. J. Appl. Phys., 1999, vol. 38, pp. 4147–5110.1143/JJAP.38.4147 ↗
3. A. Lee, C.S. Litteken, R.H. Dauskardt, and W.D. Nix: Acta Mater., 2005, vol. 53, pp. 609–1610.1016/j.actamat.2004.10.014 ↗
4. M.J. Cordill, D.F. Bahr, N.R. Moody, and W.W. Gerberich: IEEE Trans. Dev. Mater. Reliab., 2004, vol. 4 (2), pp. 163–6810.1109/TDMR.2004.829071 ↗
5. M.D. Kriese, N.R. Moody, and W.W. Gerberich: Acta Mater., 1998, vol. 46 (18), pp. 6623–3010.1016/S1359-6454(98)00277-8 ↗
6. M.D. Kriese, D.A. Boismier, N.R. Moody, and W.W. Gerberich: Eng. Fract. Mech., 1998, vol. 61, pp. 1–2010.1016/S0013-7944(98)00050-2 ↗
7. M. Toparli, and S. Sasaki: Phil. Mag. A, 2002, vol. 82 (10), pp. 2191–9710.1080/01418610210134747 ↗
8. H. Ollendorf, and D. Schneider: Surf. Coat. Technol., 1999, vol. 113, pp. 86–10210.1016/S0257-8972(98)00827-5 ↗
9. N.R. Moody, D. Medlin, D. Boehme, and D.P. Norwood: Eng. Fract. Mech., 1998, vol. 61. pp. 107–1810.1016/S0013-7944(98)00055-1 ↗
10. R.H. Dauskardt, M. Lane, Q. Ma, and N. Krishna: Eng. Fract. Mech., 1998, vol. 61, pp. 141–6210.1016/S0013-7944(98)00052-6 ↗
11. M.P. Hughey, D.J. Morris, R.F. Cook, S.P. Bozeman, B.L. Kelly, A.L.N. Chakravarty, D.P. Harkens, and L.C. Sterns: Eng. Fract. Mech., 2004, vol. 71, pp. 245–6110.1016/S0013-7944(03)00100-0 ↗
12. N. Barbosa, R.S. Ridley, C.H. Strate, R.S. Dwyer, T. Grebs, and R.P. Vinci: Mater. Res. Soc. Proc., 2002, vol. 695, pp. 791–9510.1557/PROC-695-L7.9.1 ↗
13. F.F.C. Duval, R.A. Dorey, R.H. Haigh, and R.W. Whatmore: Thin Solid Films, 2003, vol. 444, pp. 235–4010.1016/S0040-6090(03)01129-5 ↗
14. M.S. Kennedy, D.F. Bahr, C.D. Richards, and R.F. Richards: Mater. Res. Soc. Proc., 2002, vol. 741, pp. 163–6810.1557/PROC-741-J5.37 ↗
15. K.N. Tu: IBM J. Res. Develop., 1990, vol. 34 (6), pp. 868–7410.1147/rd.346.0868 ↗
16. W.K. Burton, N. Cabrera, and F.C. Frank: Phil. Trans. R. Soc. London, 1951, Ser. A, vol. 243, pp. 299–35810.1098/rsta.1951.0006 ↗
17. J.A. Schneider, S.E. Guthrie, M.D. Kriese, W.M. Clift, and N.R. Moody: Mater. Sci. Eng., 1999, vol. A259, pp. 253–6010.1016/S0921-5093(98)00897-1 ↗
18. J.W. Hutchinson, Z. Suo: Adv. Appl. Mech., 1992, vol. 29, pp. 63–19110.1016/S0065-2156(08)70164-9 ↗
19. A.A. Volinsky, D.F. Bahr, M.D. Kriese, N.R. Moody, and W.W. Gerberich: in Encyclopedia of Comprehensive Structural Integrity, I. Milne, R.O. Ritchie, and B. Karihaloo, eds., Elsevier Pergamon, Amsterdam, 2003, vol. 8.13, pp. 453–9310.1016/B0-08-043749-4/08142-8 ↗
20. J.W. Hutchinson, and Z. Suo: Adv. Appl. Mech., 1992, vol. 29, pp. 63–19110.1016/S0065-2156(08)70164-9 ↗
21. W.E. Vanderlinde, C.J. von Benken, A.R. Crockett, and R. Addison: Proc. SPIE, 1996, vol. 2874, pp. 260–7110.1117/12.250834 ↗
22. M.W. Moon, H.M. Jensen, J.W. Hutchinson, K.H. Oh, and A.G. Evans: J. Mech. Phys. Solids, 2002, vol. 50, pp. 2355–7710.1016/S0022-5096(02)00034-0 ↗
23. Jay L. Devore: Probability and Statistics for Engineering and the Sciences, 5th ed., Brooks/Cole, 2000, pp. 650–70
24. M.D. Kriese, W.W. Gerberich, and N.R. Moody: J. Mater. Res., 1999, vol. 14 (7), pp. 3007–1810.1557/JMR.1999.0404 ↗
25. M.J. Cordill, N.R. Moody, and D.F. Bahr: J. Mater. Res., 2004, vol. 19 (6), p. 1818–2510.1557/JMR.2004.0232 ↗
26. T. Godfroid, R. Gouttebaron, J.P. Dauchot, P. Leclere, R. Lazzaroni, and M. Hecq: Thin Solid Films, 2003, vol. 473, pp. 57–6210.1016/S0040-6090(03)00605-9 ↗
27. P. Oberhauser, and R. Abermann: Thin Solid Films, 1999, vol. 350, pp. 59–6610.1016/S0040-6090(99)00270-9 ↗