Interplay of Kinetics and Microstructure in the Recrystallization of Pure Copper: Comparing Mesoscopic Simulations and Experiments
Source abstract
Abstract
The kinetics and microstructure of the static recrystallization of strongly deformed, pure copper were investigated based on a comparison of mesoscopic, cellular automata simulations with experimental data. Physical models for the nucleation rate and the growth rate of recrystallized grains were employed, which required experimentally obtained informations about the deformed state as input. The orientation-distribution function and the misorientation-angle distribution for neighboring grains of deformed specimens were used to set up the microstructure serving as the start configuration for the simulations. The influences of a subgrain-size distribution, of an ongoing nucleation during recrystallization, of an inhomogeneously distributed stored energy in the deformed state, and of a misorientation-dependent interface mobility were investigated. The simulated microstructures after recrystallization exhibit a bimodal grain-size distribution instead of the broad, monomodal grain-size distribution found in the experiments. It is argued that spatially resolved determination of crystal (subgrain) orientation and (deformation) energy is necessary to arrive at realistic descriptions of both the recrystallization kinetics and the microstructure after completed recrystallization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. K.W. Mahin, K. Hanson, J.W. Morris, Acta Metall., 28, 443–53 (1980)10.1016/0001-6160(80)90134-0 ↗
2. T.O. Sætre, O. Hunderi, E. Nes, Acta Metall., 34, 981–87 (1986)10.1016/0001-6160(86)90207-5 ↗
3. D.J. Srolovitz, G. Grest, M.P. Anderson, Acta Metall., 34, 1833 (1986)10.1016/0001-6160(86)90128-8 ↗
4. W.A. Johnson, R.F. Mehl, Trans. Am. Inst. Min. Metal. Eng., 135, 416–42 (1939)
5. M. Avrami, J. Chem. Phys., 7, 1103–12 (1939)10.1063/1.1750380 ↗
6. A.N. Kolmogorov, Izv. Akad. Nauk SSSR Ser. Mat., 1, 355–59 (1937)
7. D. Juul Jensen, Acta Metall. Mater., 11, 4117–29 (1995)10.1016/0956-7151(95)00111-8 ↗
8. E.J. Mittemeijer, Fundamentals of Materials Science. (Springer Verlag, Berlin, Germany, 2010)
9. F.J. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena. 2nd ed. (Elsevier, Amsterdam, The Netherlands, 2004)
10. E. Woldt, Metall. Mater. Trans. A, 32A, 2465–73 (2001)10.1007/s11661-001-0036-7 ↗
11. T. Furu, K. Marthinsen, E. Nes, Mater. Sci. Tech., 6, 1093–1102 (1990)10.1179/026708390790189957 ↗
12. E. Fjeldberg, K. Marthinsen, Comp. Mater. Sci., 48, 267 (2010)10.1016/j.commatsci.2010.01.007 ↗
13. K. Marthinsen, O. Lohne, E. Nes, Acta Metall., 37, 135–45 (1989)10.1016/0001-6160(89)90273-3 ↗
14. H.S. Zurob, Y. Bréchet, J. Dunlop, Acta Mater., 54, 3983–90 (2006)10.1016/j.actamat.2006.04.028 ↗
15. R.D. Doherty, Solid-to-Solid Phase Transformations in Inorganic Materials, J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, eds., vol. 1, TMS, Warrendale, PA, 2005.
16. A. Brahme, J.M. Fridy, H. Weiland, A.D. Rollett, Model. Simul. Mater. Sci. Eng., 17, 015005 (2009)10.1088/0965-0393/17/1/015005 ↗
17. Y.S. Seo, Y.B. Chun, S.K. Hwang, Comp. Mater. Sci., 43, 512 (2008)10.1016/j.commatsci.2007.12.022 ↗
18. Y. Suwa, Y. Saito, H. Onodera, Comp. Mater. Sci., 44, 286–95 (2008)10.1016/j.commatsci.2008.03.025 ↗
19. D. Raabe, R. Becker, Model. Simul. Mater. Sci. Eng., 8, 445 (2000)10.1088/0965-0393/8/4/304 ↗
20. B. Radhakrishnan, G. Sarma, T. Zacharia, Acta Mater., 46, 4415–33 (1998)10.1016/S1359-6454(98)00077-9 ↗
21. T. Takaki, Y. Tomita, Int. J. Mech. Sci., 52, 320 (2010)10.1016/j.ijmecsci.2009.09.037 ↗
22. E.A. Jägle and E.J. Mittemeijer, Metall. Mater. Trans. A, 43A, 1117–31 (2012)10.1007/s11661-011-0959-6 ↗
23. Y.B. Chun, S.L. Semiatin, S.K. Hwang, Acta Mater., 54, 3673–89 (2006)10.1016/j.actamat.2006.03.055 ↗
24. D. Juul Jensen, Metall. Mater. Trans. A, 28A, 15–25 (1997)10.1007/s11661-997-0079-5 ↗
25. D. Weygand, Y. Bréchet, J. Lepinoux, Interface Sci., 9, 311 (2001)10.1023/A:1015175231826 ↗
26. A.D. Rollett, D.J. Srolovitz, R.D. Doherty, M.P. Anderson, Acta Metall., 37, 627–39 (1989)10.1016/0001-6160(89)90247-2 ↗
27. H.W. Hesselbarth, I.R. Göbel, Acta Metall. Mater., 39, 2135–43 (1991)10.1016/0956-7151(91)90183-2 ↗
28. K.G.F. Janssens, Model. Simul. Mater. Sci. Eng., 11, 157 (2003)10.1088/0965-0393/11/2/304 ↗
29. D. Raabe, Annu. Rev. Mater. Res., 32, 53 (2002)10.1146/annurev.matsci.32.090601.152855 ↗
30. C. Bos, M. Mecozzi, J. Sietsma, Comp. Mater. Sci., 48, 692–99 (2010)10.1016/j.commatsci.2010.03.010 ↗
31. Y. Bréchet, G. Martin, Comptes Rendus Phys., 7, 959–76 (2006)10.1016/j.crhy.2006.10.014 ↗
32. F. Liu, F. Sommer, C. Bos, E.J. Mittemeijer, Int. Mater. Rev., 52, 193–212 (2007)10.1179/174328007X160308 ↗
33. E.A. Holm, M.A. Miodownik, A.D. Rollett, Acta Mater., 51, 2701–16 (2003)10.1016/S1359-6454(03)00079-X ↗
34. E. Woldt, D. Juul Jensen, Metall. Mater. Trans. A, 26A, 1717–24 (1995)10.1007/BF02670758 ↗
35. J.W. Cahn, Acta Metall., 4, 449–59 (1956)10.1016/0001-6160(56)90041-4 ↗
36. R.A. Vandermeer, D. Juul Jensen, Mater. Sci. Forum, 467–470, 193–96 (2004)10.4028/www.scientific.net/MSF.467-470.193 ↗
37. E.A. Jägle, E.J. Mittemeijer, Solid State Phenom., 172–174, 1128–33 (2011)10.4028/www.scientific.net/SSP.172-174.1128 ↗
38. S. Storm, D. Juul Jensen, Scripta Mater., 60, 477–80 (2009)10.1016/j.scriptamat.2008.11.020 ↗
39. E.A. Jägle, E.J. Mittemeijer, Acta Mater., 59, 5775–86 (2011)10.1016/j.actamat.2011.05.054 ↗
40. R.A. Vandermeer, D. Juul Jensen, Metall. Mater. Trans. A, 26A, 2227–35 (1995)10.1007/BF02671238 ↗
41. E.A. Jägle, E.J. Mittemeijer, Model. Simul. Mater. Sci. Eng., 18, 065010 (2010)10.1088/0965-0393/18/6/065010 ↗
42. A. Getis, B. Boots, Models of Spatial Processes. (Cambridge University Press, Cambridge, U.K., 1978)
43. M. Miodownik, A.W. Godfrey, E.A. Holm, D.A. Hughes, Acta Mater., 47, 2661 (1999)10.1016/S1359-6454(99)00137-8 ↗
44. W.H. Press, B.P. Flannery, S.A. Teukolsky, W.T. Vetterling, Numerical Recipes. (Cambridge University Press, Cambridge, U.K., 1986)
45. J.W. Christian, The Theory of Transformations in Metals and Alloys. 3rd ed. (Pergamon, Oxford, U.K, 2002)
46. V. Marx, F. Reher, G. Gottstein, Acta Mater., 47, 1219–30 (1999)10.1016/S1359-6454(98)00421-2 ↗
47. J.K. Mackenzie, Biometrika, 45, 229–40 (1958)10.1093/biomet/45.1-2.229 ↗