An Interface-Enriched eXtended Finite Element-Level Set Simulation of Solutal Melting of Additive Powder Particles during Transient Liquid Phase Bonding
Source abstract
Abstract
A new numerical simulation model is developed by using an interface-enriched eXtended Finite Element-Level Set (XFE-LS) method to study the solute-induced melting of additive powder particles (APPs) during transient liquid phase (TLP) bonding. The robust model captures rapidly occurring concurrent interfacial events at multiple propagating liquid-solid interfaces to simulate the melting behavior. In contrast to the critical assumption in analytical models, numerical calculations show that solute-transport into the APPs during the equilibration of the liquid composition is a significant factor that affects the APPs melting behavior. Also, the study shows that the solute-transport dependence of extent of APPs melting is influenced by the kinetics of solid-state solute diffusion within the particles. The understanding generated by the numerical analysis has resulted in the use of interlayer powder mixture that contains base-alloy APPs to produce single crystal TLP joint that has matching crystallographic orientations with single crystal substrate material, at a substantially reduced processing time, which has been previously considered unfeasible.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. S.D. Duvall and W.A. Owczarski: Weld. J., 1967, vol. 46(9), pp. 423–32.
2. O.A. Ojo and M.C. Chaturvedi: Metall. Mater. Trans. A, 2007, vol. 38A, pp 356–369.10.1007/s11661-006-9025-1 ↗
3. D.S. Duvall, W.A. Owczarski, and D.F. Paulonis: Weld. J., 1974, vol. 53(4), pp. 203–14.
4. A.A. Shirzadi and E.R. Wallach: Acta Mater., 1999, vol. 47(13), pp. 3551–60.10.1016/S1359-6454(99)00234-7 ↗
5. K. Tokoro, N. Wikstrom, O.A. Ojo, and M.C. Chaturvedi: Mater. Sci. Eng. A, 2008, vol. 477, pp. 311–18.10.1016/j.msea.2007.05.069 ↗
6. B. Dutta and M. Rettenmayr: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2713–20.10.1007/BF02830330 ↗
7. E. Gamsjager, J. Svoboda, F.D. Fischer, and M. Rettenmayr: Acta Mater., 2007, vol. 55, pp. 2599–2607.10.1016/j.actamat.2006.12.002 ↗
8. M. Buchmann and M. Rettenmayr: J. Cryst. Growth, 2008, vol. 310, pp. 4623–27.10.1016/j.jcrysgro.2008.07.096 ↗
9. Y. Zhou: J. Mater. Sci. Lett., 2001, vol. 20, pp. 841–44.10.1023/A:1010914813875 ↗
10. Y. Zhou and T. North: Model. Simul. Mater. Sci. Eng., 1993, vol. 1, pp. 505–16.10.1088/0965-0393/1/4/012 ↗
11. T.C. Illingworth and I.O. Golosnoy: J. Comput. Phys., 2005, vol. 209, pp. 207–25.10.1016/j.jcp.2005.02.031 ↗
12. J.F. Li, P.A. Agyakwa, and C.M. Johnson: J. Mater. Sci., 2010, vol. 45, pp. 2340–50.10.1007/s10853-009-4199-8 ↗
13. J.M. Melenk and I. Babuska: Comput. Methods Appl. Mech. Eng., 1996, vol. 39, pp. 289–314.10.1016/S0045-7825(96)01087-0 ↗
14. D. Chopp and J. Dolbow: Int. J. Numer. Methods Eng., 2002, vol. 54, pp. 1209–33.10.1002/nme.468 ↗
15. N. Sukumar, D.L. Chopp, N. Moes, and T. Belytschko: Comput. Methods Appl. Mech. Eng., 2001, vol. 190, pp. 6183–6200.10.1016/S0045-7825(01)00215-8 ↗
16. J. Chessa, H. Wang, and T. Belytschko: Int. J. Numer. Methods Eng., 2003, vol. 57, pp. 1015–38.10.1002/nme.777 ↗
17. R. Gracie, H. Wang, and T. Belytschko: Int. J. Numer. Methods Eng., 2008, vol. 74(11), pp. 1645–69.10.1002/nme.2217 ↗
18. T.P. Fries: Int. J. Numer. Methods Eng., 2008, vol. 75, pp. 503–32.10.1002/nme.2259 ↗
19. T. Belytschko, W.K. Liu, and B. Moran: Nonlinear Finite Elements for Continua and Structures, John Wiley & Sons, New York, 2003, ISBN:0-471-98774-3.
20. H. Ji and J.E. Dolbow: Int. J. Numer. Methods Eng., 2004, vol. 61, pp. 2508–35.10.1002/nme.1167 ↗
21. R. Duddu, D. Chopp, P. Voorhees, and B. Moran: J. Comput. Phys., 2010, vol. 230, pp. 1249–64.10.1016/j.jcp.2010.11.002 ↗
22. N. Moes, M. Cloirec, P. Cartraud, and J.F. Remacle: Comput. Methods Appl. Mech. Eng., 2003, vol. 192, pp. 3163–77.10.1016/S0045-7825(03)00346-3 ↗
23. S. Soghrati, A.M. Aragón, C.A. Duarte, and P.H. Geubelle: Int. J. Numer. Methods Eng., 2012, vol. 89(8), pp. 991–1008.10.1002/nme.3273 ↗
24. N. Sukumar and J. Prevost: Int. J. Solids Struct., 2003, vol. 40, pp. 7513–37.10.1016/j.ijsolstr.2003.08.002 ↗
25. S. Osher and J. Sethian: J. Comput. Phys., 1988, vol. 79(1), pp. 12–49.10.1016/0021-9991(88)90002-2 ↗
26. S. Osher and R. Fedkiw: Level Set Methods and Dynamic Implicit Surfaces, Springer, New York, 2003, ISBN: 0-387-95482-1.10.1007/b98879 ↗
27. A. Ghoneim and O.A. Ojo: Comput. Mater. Sci., 2011, vol. 50, pp. 1102–13.10.1016/j.commatsci.2010.11.008 ↗
28. A. Ghoneim and O.A. Ojo: Metall. Mater. Trans. A, 2012, vol. 43A(3), pp. 900–11.10.1007/s11661-011-1010-7 ↗
29. P.K. Liao and K.E. Spear: Bull. Alloy Phase Diag., 1986, vol. 7(3), p. 550.10.1007/BF02868996 ↗
30. Y. Zhou, W.F. Gale, and T.H. North: Int. Mater. Rev., 1995, vol. 40, pp. 181–96.10.1179/095066095790151160 ↗
31. O.A. Idowu, O.A. Ojo, and M.C. Chaturvedi: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2787–96.10.1007/BF02586111 ↗
32. M.M. Abdelfattah and O.A. Ojo: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 377–85.10.1007/s11661-008-9726-8 ↗
33. Y. Xinjian, B.K. Myung, and Y.K. Chung: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1310–24.
34. M.K. Dinkel, P. Heinz, F. Pyczak, A. Volek, M. Ott, E. Affeldt, A. Vossberg, M. Goken, and R.F. Singer: 11th International Symposium on Superalloys, 2008, pp. 211–20.10.7449/2008/Superalloys_2008_211_220 ↗