journal article·2012-12Open access

Conversion Model for the Martensitic Transformation of Banded Austenite in a Ferrite Matrix

Seok-Jae Lee, Javad Mola, Bruno C. De Cooman

Abstract

A model is proposed for the calculation of the volume fraction of martensite formed during the transformation of banded austenite in a hot-rolled AISI 430 stainless steel. The proposed model includes the strain resulting from the difference in coefficient of thermal expansion of austenite and ferrite and the effect of alloying elements on the lattice parameters. The model was verified by comparing the calculated values of the transformation strain of martensite with the experimental measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. M. Takahashi and H.K.D.H. Bhadeshia: J. Mater. Sci. Lett., 1989, vol. 8, pp. 477-78.10.1007/BF00720712 ↗
2. M. Onink, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer, S. van der Zwaag, J.H. Root, and N.B. Konyer: Scripta Mater., 1993, vol. 29, pp. 1011-16.10.1016/0956-716X(93)90169-S ↗
3. M. Onink, F.D. Tichelaar, C.M. Brakman, E.J. Mittemeijer, and S. van der Zwaag, Z. Metallkd., 1996, vol. 87, pp. 24-32.
4. R.C. Dykhuizen, C.V. Robino, and G.A. Knorovsky: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 107-117.10.1007/s11663-999-0011-z ↗
5. C.M. Li, F. Sommer, and E.J. Mittemeijer: Z. Metallkd., 2000, vol. 91, pp. 5-9.
6. C.M. Li, F. Sommer, and E.J. Mittemeijer: Mater. Sci. Technol., 2000, vol. 16, pp. 625-29.10.1179/026708300101508388 ↗
7. C.M. Li, F. Sommer, and E.J. Mittemeijer: Z. Metallkd., 2001, vol. 92, pp. 32-36.
8. J.Z. Zhao, C. Mesplont, and B.C. De Cooman, ISIJ Int., 2001, vol. 41, pp. 492-97.10.2355/isijinternational.41.492 ↗
9. T.A. Kop, J. Sietsma, and S. van der Zwaag: J. Mater. Sci., 2001, vol. 36, pp. 519-26.10.1023/A:1004805402404 ↗
10. C.M. Li, F. Sommer, and E.J. Mittemeijer: Mater. Sci. Eng. A, 2002, vol. 325, pp. 307-319.10.1016/S0921-5093(01)01459-9 ↗
11. S. Choi: Mater. Sci. Eng. A, 2003, vol. 363, pp. 72-80.10.1016/S0921-5093(03)00587-2 ↗
12. M. Gómez, S.F. Medina, and G. Caruana: ISIJ Int., 2003, vol. 43, pp. 1228-37.10.2355/isijinternational.43.1228 ↗
13. S.J. Lee, M.T. Lusk, and Y.K. Lee: Acta Mater., 2007, vol. 55, pp. 875-82.10.1016/j.actamat.2006.09.008 ↗
14. D.W. Suh, C.S. Oh, H.N. Han, and S.J. Kim: Acta Mater., 2007, vol. 55, pp. 2659-69.10.1016/j.actamat.2006.12.007 ↗
15. D.W. Suh, C.S. Oh, H.N. Han, and S.J. Kim: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2963-73.10.1007/s11661-007-9361-9 ↗
16. D. San Martín, P.E.J. Rivera-Díaz-del-Castillo, and C. García de Andrés: Scripta Mater., 2008, vol. 58, pp. 926-29.10.1016/j.scriptamat.2008.01.019 ↗
17. V.S. Warke, R.D. Sisson, and M.M. Makhlouf: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 569-72.10.1007/s11661-008-9727-7 ↗
18. S.J. Lee, K.D. Clarke, and C.J. Van Tyne: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2224-35.10.1007/s11661-010-0267-6 ↗
19. S.J. Lee and K.D. Clarke: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3027-31.10.1007/s11661-010-0418-9 ↗
20. S.J. Lee and C.J. Van Tyne: ISIJ Int., 2011, vol. 51, pp. 169-71.10.2355/isijinternational.51.169 ↗
21. J.Y. Chae, J.H. Jang, G. Zhang, K.H. Kim, J.S. Lee, H.K.D.H. Bhadeshia, and D.W. Suh: Scripta Mater., 2011, vol. 65, pp. 245-48.10.1016/j.scriptamat.2011.04.018 ↗
22. J. Mola, D.C. Chae, and B.C. De Cooman: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1429-40.10.1007/s11661-010-0206-6 ↗
23. R.A. Jaramillo, M.T. Lusk, and M.C. Mataya: Acta Mater., 2004, vol. 52, pp. 851-58.10.1016/j.actamat.2003.11.017 ↗
24. R.A. Jaramillo and M.T. Lusk: Acta Mater., 2004, vol. 52, pp. 859-67.10.1016/j.actamat.2003.10.020 ↗
25. G.W. Greenwood and R.H. Johnson, Proc. R. Soc. Lond., 1965, vol. A283, pp. 403-22.
26. L. Cheng, A. Böttger, Th.H. de Keijser, and E.J Mittemeijer: Scripta Metall. Mater., 1990, vol. 24, pp. 509-14.10.1016/0956-716X(90)90192-J ↗
27. C.L. Magee: Ph.D. Thesis, Carnegie Inst. Tech., Pittsburgh, PA, 1966.
28. S. Denis, E. Gautier, A. Simon, and G. Beck: Mater. Sci. Technol., 1985, vol. 1, pp. 805-14.10.1179/026708385790124071 ↗
29. S. Sjöström: Mater. Sci. Technol., 1985, vol. 1, pp. 823-29.10.1179/026708385790124099 ↗
30. J.B. Leblond, J. Devaux, and J.C. Devaux: Int. J. Plasticity, 1989, vol. 5, pp. 551-672.10.1016/0749-6419(89)90001-6 ↗
31. F.D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud, and T. Antretter: Int. J. Plasticity, 2000, vol. 16, pp. 723-48.10.1016/S0749-6419(99)00078-9 ↗
32. L. Taleb, N. Cavallo, and F. Waeckel: Int. J. Plasticity, 2001, vol. 17, pp. 1-20.10.1016/S0749-6419(99)00090-X ↗
33. N. Enzinger: Mathematical Modelling of Welding Phenomena, vol. 6, Maney Publishing, London, 2002, p. 519.
34. L. Taleb and F. Sidoroff: Int. J. Plasticity, 2003, vol. 19, pp. 1821-42.10.1016/S0749-6419(03)00020-2 ↗
35. K. Okamura, K. Yamamoto, and M. Fukumoto: Proceedings of the 2nd IMS-VHT International Meeting, Yokohama, Japan, 2005.
36. T. Inoue, Y. Watanabe, K. Okamura, M. Narazaki, H. Shichino, D.Y. Ju, H. Kanamori, and K. Ichitani: Proceedings of the 1st International Conference on Distortion Engineering, IDE 2005, Bremen, Germany, 2005, p. 133.
37. M. Dalgic and G. Löwisch: Proceedings of the 1st International Conference on Distortion Engineering, IDE 2005, Bremen, Germany, 2005, p. 347.
38. S. Casotto, S. Bruschi, and P.F. Bariani: Proceedings of the 1st International Conference on Distortion Engineering, IDE 2005, Bremen, Germany, 2005, p. 357.
39. S. Harjo, Y. Tomota, and M. Ono: Acta Mater., 1999, vol. 47, pp. 353-62.10.1016/S1359-6454(98)00300-0 ↗
40. B.L. Ferguson, Z. Li, and A.M. Freborg: Comput. Mater. Sci., 2005, vol. 34, pp. 274-81.10.1016/j.commatsci.2005.02.005 ↗
41. J. Mola and B.C. De Cooman: Scripta Mater., 2011, vol. 65, pp. 834-37.10.1016/j.scriptamat.2011.07.041 ↗