Dynamic fracture toughness of a Ti-45Al-1.6Mn alloy at high temperature
Source abstract
Abstract
Dynamic fracture toughness of a reactive sintered γ-base TiAl alloy is studied in the temperature range from 298 to 1073 K. The stop block method is employed in order to observe the crack paths and microcrack distribution ahead of a main crack tip under dynamic loading conditions at high temperature. Fracture surface, crack path, and microcrack observations are carried out using a scanning electron microscope (SEM). Microcrack initiation criteria and crack-tip stress shielding effect caused by crack deflection are discussed. The experimental results demonstrate that the dynamic fracture toughness, J Id , increases with increasing temperature, and after attaining the maximum value at 873 K, the toughness decreases. Crack path morphology varies with temperature. The stress shielding effect at the crack tip caused by main crack deflection was found to affect the difference in crack extension energy for each temperature. The number of microcracks ahead of a main crack varies with temperature. The stress shielding effect at the crack tip caused by microcracking was found to contribute to toughening around 873 K.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Y.-W. Kim and D.M. Dimiduk: JOM, 1991, Aug. pp. 40–47.10.1007/BF03221103 ↗
2. K.S. Chan: Metall. Trans. A, 1993, vol. 24A, pp. 569–83.10.1007/BF02656627 ↗
3. N.J. Rogers and P. Bowen: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 231–40.
4. R. Gnanamoorthy, Y. Mutoh, N. Masahashi, and Y. Mizuhara: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 305–13.10.1007/BF02664668 ↗
5. M. Enoki and T. Kishi: Mater. Sci. Eng. A, 1995, vols. 192A–193A, pp. 420–26.10.1016/0921-5093(94)03244-0 ↗
6. M. Yamaguchi, H. Inui, S. Yokoshima, K. Kishida, and D.R. Johnson: Mater. Sci. Eng. A, 1996, vol. 213A, pp. 25–31.10.1016/0921-5093(96)10242-2 ↗
7. Z. Jin, G.T. Gray III, Y.-W. Kim, and M. Yamaguchi: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 225–33.
8. Z.M. Sun, T. Kobayashi, H. Fukumasu, I. Yamamoto, and K. Shibue: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 263–77.10.1007/s11661-998-0178-y ↗
9. C.M. Austin and T.J. Kelly: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 143–50.
10. D.E. Larsen, Jr.: Mater. Sci. Eng. A, 1996, vol. 213A, pp. 128–33.10.1016/0921-5093(96)10234-3 ↗
11. K. Shibue, T. Furuyama, M.-S. Kim, and M. Kumagai: J. Jpn. Soc. Powder Powder Metall., 1994, vol. 41, pp. 146–51.10.2497/jjspm.41.146 ↗
12. T. Kobayashi: Int. J. Fract., 1983, vol. 23, pp. R105-R109.10.1007/BF00028832 ↗
13. Annual Book of ASTM Standards, ASTM E399-90, ASTM, Philadelphia, PA, 1995, Section 3, vol. 03.01, pp. 412–42.
14. Annual Book of ASTM Standards, ASTN E813-89, ASTM, Philadelphia, PA, 1995, Section 3, vol. 03.01, pp. 646–60.
15. R.E. Schafrik: Metall. Trans. A, 1977, vol. 8A, pp. 1003–06.10.1007/BF02661586 ↗
16. T. Kobayashi, I. Yamamoto, and M. Niinomi: J. Testing Eval., 1993, May, pp. 145–53.10.1520/JTE11763J ↗
17. J.R. Rice and G.F. Rosengren: J. Mech. Phys. Solids, 1968, vol. 16, pp. 1–12.10.1016/0022-5096(68)90013-6 ↗
18. J.W. Hutchinson: J. Mech. Phys. Solids, 1968, vol. 16, pp. 13–31.10.1016/0022-5096(68)90014-8 ↗
19. T.L. Anderson: Fracture Machanics, CRC Press, Boca Raton, 1995.
20. B.A. Bilby, G.E. Cardew, and I.C. Howard: in Fracture 1977, ICF 4, D.M.R. Taplin, ed., 1977, vol. 3, pp. 197–200.10.1016/B978-0-08-022142-7.50039-9 ↗
21. J.W. Hutchinson: Acta Metall., 1987, vol. 35, pp. 1605–19.10.1016/0001-6160(87)90108-8 ↗
22. S.-X. Gong and H. Horii: J. Mech. Phys. Solids, 1989, vol. 37, pp. 27–46.10.1016/0022-5096(87)90003-2 ↗
23. B. Budiansky and R.J. O’Connell: Int. J. Solids Struct., 1976, vol. 12, pp. 81–97.10.1016/0020-7683(76)90044-5 ↗