High-Temperature Oxidation of Cr-Mo Steels and Its Relevance to Accelerated Rupture Testing and Life Assessment of In-Service Components
Source abstract
Abstract
Use of accelerated creep rupture testing to assess the remaining life of components operating at elevated temperatures, such as pipes and tubes, is a common practice. At high temperatures, oxide growth can affect the creep results by diameter reduction and thus can increase the stress. However, the nature of oxide layer and hence oxidation behavior can be affected by minor changes in alloying composition of steels. This article presents the study of oxide-scale growth and specimen diameter reduction kinetics during oxidation of two Cr-Mo steels used in the manufacture of boiler tubing. Oxidation tests were carried out on 1.25Cr-0.5Mo and 2.25Cr-1Mo steels at 600 °C and 700 °C for times up to 1000 hours, using cylindrical specimens (similar to those used for creep testing). At 600 °C, the oxidation resistance of 2.25Cr-1Mo steel was superior to 1.25Cr-0.5Mo steel. However, the oxidation resistance of the two steels at 700 °C was similar in spite of the difference in their Cr contents. Multilayer oxide scales of oxides with various compositions were observed to have formed over the two steels. The similarity in oxidation kinetics of the two steels at 700 °C (in spite of differences in Cr contents) is ascribed to their Si contents and the predominant role of Si in oxidation at this temperature. The article also discusses implications of the variation in the oxidation kinetics to the stress enhancement in creep specimens due to scaling losses, and possible inaccuracies in creep data, as a result of minor variations in alloying composition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. B. Dooley and W. McNaughton: Boiler Tube Failures: Theory and Practice, EPRI, Palo Alto, CA, 1996
2. A. Fry, S. Osgerby, M. Wright: Oxidation of Alloys in Steam Environments––A Review, National Physical Laboratory, Middlesex, 2002
3. N.J. Simms, J.A. Little: Oxid. Met., 1987, vol. 27 (5–6), pp. 283–9910.1007/BF00659272 ↗
4. N.J. Simms, J.A. Little: Mater. Sci. Technol., 1988, vol. 4 (12), pp. 1133–3910.1179/mst.1988.4.12.1133 ↗
5. A.S. Khanna, J.B. Gnanamoorthy: Oxid. Met., 1985, vol. 23 (1–2), pp. 17–3310.1007/BF01095805 ↗
6. A.S. Khanna, B.B. Jha, Raj Baldev: Oxid. Met., 1985, vol. 23 (3–4), pp. 159–7610.1007/BF00659901 ↗
7. R.K. Singh Raman, A.S. Khanna, J.B. Gnanamoorthy: J. Mater. Sci. Lett., 1990, vol. 9 (3), pp. 353–5410.1007/BF00725848 ↗
8. R.K. Singh Raman, R.K. Dayal, A.S. Khanna, J.B. Gnanamoorthy: J. Mater. Sci. Lett., 1989, vol. 8 (3), pp. 277–7810.1007/BF00725496 ↗
9. R.K. Singh Raman, J.B. Gnanamoorthy: Corr. Sci., 1993, vol. 34 (8), pp. 1275–8810.1016/0010-938X(93)90087-W ↗
10. R.K. Singh Raman, A.S. Khanna, R.K. Tiwari, and J.B. Gnanamoorthy: Oxid. Met., 1992, vol. 37 (1–2), pp. 1–1210.1007/BF00665627 ↗
11. R.K. Singh Raman, J.B. Gnanamoorthy: Weld. J., 1995, vol. 74 (4), pp. 133–39
12. L.O. Bueno, L. Marino: J. Press. Vessel Technol., Trans. ASME, 2001, vol. 123 (1), pp. 97–10410.1115/1.1335498 ↗
13. L. Marino, L.O. Bueno: J. Press. Vessel Technol., Trans. ASME, 2001, vol. 123 (1), pp. 88–9610.1115/1.1335499 ↗
14. C.D. Lundin and Y. Wang: Weld. Res. Counc. Bull., 1989, vol. (348), p. 39
15. D. Mortimer, W.B.A. Sharp: Br. Corr. J., 1968, vol. 3 (2), pp. 61–6710.1179/000705968798326424 ↗
16. R.V. Shankar: Mater. Sci. Eng. A, 2004, vol. 364 (1–2), pp. 232–39
17. N. Birks, G.H. Meier: Introduction to High Temperature Oxidation of Metals, Edward Arnold, London, 1983
18. G.C. Wood: Corr. Sci., 1961, vol. 2, pp. 173–9610.1016/0010-938X(62)90019-7 ↗
19. S.N. Basu, D. Nath, and J. Tebbets: Proc. 1992 Fall Meeting of the Materials Research Society, Boston, MA, Nov. 30–Dec. 4 1992, Materials Research Society, Pittsburgh, PA, 1993, pp. 541–44
20. R.K. Singh Raman: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1847–5810.1007/BF02670772 ↗
21. R.K. Singh Raman, J.B. Gnanamoorthy, S.K. Roy: Oxid. Met., 1993, vol. 40 (1–2), pp. 21–3610.1007/BF00665257 ↗
22. R.K. Singh Raman, J.B. Gnanamoorthy, S.K. Roy: Oxid. Met., 1994, vol. 42 (5–6), pp. 335–5510.1007/BF01046754 ↗
23. R.K. Singh Raman, A.S. Khanna, B.K. Choudhary, J.B. Gnanamoorthy: Mater. Sci. Eng. A, 1991, vol. 148 (2), pp. 299–30610.1016/0921-5093(91)90832-8 ↗
24. N. Boucherit, A. Hugot-Le-Goff, S. Joiret, G. Beranger, and H. Chaudanson: Thin Solid Films, 2nd Int. Symp. on Trends and New Applications in Thin Films—Part I, Feb. 27-Mar. 3 1989, vol. 174 (1–2), part 1, pp. 111–1610.1016/0040-6090(89)90878-X ↗
25. S.C. Tjong: Mater. Characterization, 1991, vol. 26 (1), pp. 29–4410.1016/1044-5803(91)90006-P ↗
26. R.K. Singh Raman, B. Gleeson, D.J. Young: Mater. Sci. Technol., 1998, vol. 14, pp. 373–7610.1179/mst.1998.14.5.373 ↗
27. M. Bedjaoui, B. Despax, M. Caumont, C. Bonafos: Mater. Sci. Eng., BEMRS 2005, Symp. D–Materials Science and Device Issues for Future Technologies, 2005, vols. 124–125, pp. 508–12
28. A.M. Huntz, V. Bague, G. Beauple, C. Haut, C. Severac, P. Lecour, X. Longaygue, and F. Ropital: Appl. Surf. Sci., 2003, vol. 207 (1–4), pp. 255–7510.1016/S0169-4332(02)01505-2 ↗
29. T. Ban, K. Bohnenkamp, H.-J. Engell: Corr. Sci., 1979, vol. 19 (4), pp. 283–8910.1016/0010-938X(79)90012-X ↗
30. ASTM-E139: Standard Practice for Conducting Creep, Creep-Rupture, and Stress Rupture Tests for Metallic Materials, ASTM, Philadelphia, PA, 1995, vol. 3.01, pp. 252–62
31. V. Ramaswamy: Damage Mechanisms and Life Assessment of High-Temperature Components, ASM INTERNATIONAL, Metals Park, OH, 1989
32. R.K. Singh Raman: Metall. Mater. Trans. A, 2000, vol. 31 (12), pp. 3101–0810.1007/s11661-000-0089-z ↗
33. R.H. Richman: Proc.–ISTFA 1982, Int. Symp. for Testing and Failure Analysis 1982, San Jose, CA, 1982, International Society for Testing & Failure Analysis, Torrance, CA, 1982, pp. 219–25
34. Oxide Dating for Failure Analysis, Powergen, Brochore, United Kingdom, 1999
35. L.W. Pinder: Corr. Sci., 1981, vol. 21 (1), pp. 749–6310.1016/0010-938X(81)90086-X ↗
36. Boiler Tube Failure—Metallurgical Guide, EPRI Report Report No. TR-102433-V2, EPRI, Palo Alto, CA, 1993