Bilinear Coffin–Manson Relationship in Thin Sheets of Interstitial-Free Steel
Source abstract
Abstract
Bilinear Coffin–Manson (C-M) as well as cyclic stress–strain (CSS) relationship is observed during low-cycle fatigue study (strain amplitude ∆e t/2 = 0.0015 to 0.004) of an interstitial-free (IF) steel sheet unlike some of the earlier reports. In this work, an attempt has been made to correlate the observed bilinearity with the evolution of dislocation substructure and the nature of cyclic strain hardening in the selected steel. To achieve this goal, some of the low-cycle fatigue (LCF) tests were interrupted after the elapse of 2, 5, 10, 20, and 50 pct of fatigue life, and the microstructures at various stages were examined using TEM. Cyclic hardening at low-strain amplitudes (∆e t/2 ≤ 0.0020) is predominantly due to dislocation–dislocation and dislocation–precipitation interaction. On the other hand, at high-strain amplitudes (∆e t/2 > 0.0020), subgrains start forming much earlier in fatigue life, and there is an additional contribution of subgrains toward the total hardening. The above phenomenon leads to a difference in the values of cyclic strain-hardening exponents, e.g., 0.24 at low (∆e t/2 ≤ 0.0020) and 0.45 at high ∆e t/2, respectively. The above difference is reflected in the bilinear C-M plot around the transition ∆e t/2 of 0.0020 as also observed in the CSS plot.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. American Iron and Steel Institute: Automotive Design Manual, Revision 6.1, American Iron and Steel Institute & Auto/Steel Partnership, Pittsburgh, PA, 2002.
2. M.T. Milan, D. Spinelli, and W.W. Filho Bose: Int. J. Fatigue, 2001, vol. 23, pp. 129-33.10.1016/S0142-1123(00)00076-1 ↗
3. K. Biswas, L. Eising, E. Gorl, and M. Schulte: Steel Res., 1993, vol. 64, pp. 407-13.10.1002/srin.199301045 ↗
4. B. Yan: Proc. 37th MWSP Conf., vol. XXXIII, The Iron and Steel Society Inc., Warrendale, PA, 1996, pp. 101-14.
5. A. Gustavsson: Scand. J. Metall., 1996, vol. 25, pp. 244-50.
6. B. Yan: IF Steels 2000 Proceedings, Pittsburgh, Iron & Steel Society, Pittsburgh, PA, 2000, pp. 313–25.
7. S. Majumdar, D. Bhattacharjee, and K.K. Ray: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1676-90.10.1007/s11661-008-9537-y ↗
8. S. Majumdar, D. Bhattacharjee, and K.K. Ray: Scripta Metall., 2011, vol. 64, pp. 288-91.10.1016/j.scriptamat.2010.10.001 ↗
9. S. Majumdar, D. Bhattacharjee, and K.K. Ray: Mater. Sci. Technol., 2010, vol. 26, pp. 493-500.10.1179/174328409X408893 ↗
10. C. Shih, N. Ho, and H. Huang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6381-6.10.1016/j.msea.2011.04.048 ↗
11. C. Shih, N. Ho, and H. Huang: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1995-2001.10.1007/s11661-010-0186-6 ↗
12. M. Judelewicz, H.U. Künzi, N. Merk, and B. Ilschner: Mater. Sci. Eng. A, 1994, vol. 186, pp. 135-42.10.1016/0921-5093(94)90312-3 ↗
13. G.E. Dieter: Mechanical Metallurgy, SI Metric Edition, McGraw Hill Publishing Co. Place, London, U.K., 1988, pp. 406–19.
14. G.E. Dieter, Mechanical Metallurgy, SI Metric Edition, McGraw Hill Publishing Co. Place, London, U.K., 1988, pp. 390-4.
15. S.R. Mediratta, V. Ramaswamy, and P. Rama Rao: Scripta Metall., 1986, vol. 20, pp. 555-8.10.1016/0036-9748(86)90253-X ↗
16. S. Sankaran, V. Subramanya Sarma, and K.A. Padmanabhan: Mater. Sci. Eng. A, 2003, vol. 345, pp. 328-35.10.1016/S0921-5093(02)00511-7 ↗
17. B.A. Lerch and V. Gerold: Acta Metall., 1985, vol. 33, pp. 1709-16.10.1016/0001-6160(85)90165-8 ↗
18. V. Singh, M. Sundaraman, W. Chen, and R.P. Wahi: Metall. Trans. A, 1991, vol. 22A, pp. 499-506.10.1007/BF02656817 ↗
19. S.R. Mediratta, V. Ramaswamy, and P. Rama Rao: Int. J. Fatigue, 1985, vol. 7, pp. 107-115.10.1016/0142-1123(85)90041-6 ↗
20. P. Ghosh, R.K. Ray, B. Bhattacharya, and S. Bhargava: Scripta Metall., 2006, vol. 55, pp. 271-4.10.1016/j.scriptamat.2006.03.043 ↗
21. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., John Wiley & Sons, Inc., New York, NY, 1995, pp. 557–66.
22. D. Kuhlmann-Wilsdorf: Work Hardening in Tension and Fatigue, 1st ed., AIME, Warrendale, PA, 1977, pp. 1-44.
23. E.O. Hall: Proc. Phys. Soc., 1951, vol. 64, pp. 747-53.10.1088/0370-1301/64/9/303 ↗
24. N.J. Petch: J. Iron Steel Inst., 1953, vol. 173, pp. 25-7.
25. R.K. Ray, B. Hutchinson, and C. Ghosh: Int. Mater. Rev., 2010, vol. 56, pp. 73-97.10.1179/095066010X12646898728444 ↗
26. R.R. Pradhan: Internal Report, Bethlehem Steel, Bethlehem, PA, 1981.