journal article·2014-03

Structural Evolution and Phase Stability of Hume-Rothery Phase in a Mechanically Driven Nanostructured Ag-15 at. pct Sn Alloy

S. Chithra, K. D. Malviya, K. Chattopadhyay

Publisher page

Abstract

The paper reports phase evolution in mechanically driven Ag-15 at. pct Sn alloy powder starting with elemental powders in order to establish the feasibility of designing nanocomposites of a Ag-Sn solid solution. This alloy lies in the phase field of the hexagonal ζ-phase which is a well-known Hume-Rothery electron compound with an electron-to-atom ratio of about 1.45 and hexagonal crystal structure (a = 0.2966 nm, c = 0.4782 nm). Through a systematic use of X-ray diffraction and transmission electron microscopy, the results establish the formation of the ζ-phase which co-exists with the Ag solid solution during the initial phase of milling. Mechanical milling for long duration (55 hours) destabilizes the ζ-phase. A complete solid solution of Ag with a grain size of ~8 nm could be achieved after 60 hours of milling. Additional milling can induce decomposition of the solid solution that results in a reappearance of ζ-phase. We present a detailed thermodynamic calculation which indicates that complete Ag solid solution of the present alloy composition would be possible if the crystallites size can be reduced below a certain critical size. In particular, we show that both Ag and ζ-phase grain sizes need to be taken into account for determining the metastable equilibrium and the phase change that has been experimentally observed. Finally, we argue that recrystallization processes set a limit to the achievable size of the nanoparticles with metastable Ag solid solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Microstructure and mechanical properties · Quasicrystal Structures and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. I.E. Anderson: J. Mater. Sci. Mater. Electron., 2007, Vol.18(1–3), pp.55-76.
2. H.M. Khlyap, V.I. Laptev: Recent Pat. Nanotechnol., 2011, Vol. 5(2), pp. 100-05.10.2174/187221011795909189 ↗
3. Y. Mizuno, H. Takahashi, S. Ukishima, T. Komatsu, and S. Ishibashi: US Patent, 12 May 2011, US 2011/0108114 A1.
4. D. Partin, A. Milnes, L. Vassamillet: J. Electron. Mater., 1978, Vol. 7(2), pp. 279-307.10.1007/BF02655679 ↗
5. G. Toida, Y. Shirai, N. Mizmura, M. Komagata, and K. Suzuki: 5th IEEE International Conference on Polymers and Adhesives in Microelectronics and Photonics, Polytronics, 2005, pp. 7–12.
6. K. Suzuki, Y. Shirai, N. Mizumura, and M. Komagata: 4th IEEE International Conference on Polymers and Adhesives in Microelectronics and Photonics, Polytronics, 2004, pp. 57–62.
7. E. Ronnebro, J. Yin, A. Kitano, M. Wada, S. Tanase, T. Sakai: J. Electrochem. Soc., 2004, Vol. 151(10), pp. 1738-44.10.1149/1.1793671 ↗
8. J. Yin, M. Wada, S. Yoshida, K. Ishihara, S. Tanase, T. Sakai: J. Electrochem. Soc., 2003, Vol. 150(8), pp. 1129-35.10.1149/1.1590326 ↗
9. L.B. Johnson: J. Biomed. Mater. Res., 1970, Vol. 4(2), pp. 269-74.10.1002/jbm.820040207 ↗
10. C. Suryanarayana: Non-Equilibrium Processing of Materials, 2nd ed., vol. 2, Pergamon Press, Oxford, 1999, pp. xix–xx.
11. C.C. Koch, J.D. Whittenberger: Intermetallics, 1996, Vol. 4(5), pp. 339-55.10.1016/0966-9795(96)00001-5 ↗
12. B.S. Murty, S. Ranganathan: Int. Mater. Rev., 1998, Vol. 43(3), pp. 101-141.10.1179/imr.1998.43.3.101 ↗
13. E.H. Fecht, Z. Fu, W.L. Johnson: Adv. Powder Metall., 1989, Vol. 1, pp. 111-22.
14. A.R. Jones, K.H. Jürgen Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan, and P. Veyssière: Encyclopedia of Materials: Science and Technology, Elsevier, Oxford, 2001, pp. 1–5.
15. E. Gaffet, M. Abdellaoui, N. Malhouroux: Mater. Trans., 1995, Vol. 36(2): pp. 198-209.10.2320/matertrans1989.36.198 ↗
16. C. Suryanarayana: Bibliography, on Mechanical Alloying and Milling. Cambridge Interscience Publ., Cambridge, 1995.
17. M. Lai, L. Lu: Mechanical Alloying, Kluwer, Boston, 1998.
18. W. Hume-Rothery: The Structure of Metals and Alloys, vol. 1, Institute of Metals Monograph and Report Series, London, 1936.
19. H.W.King, T.B.Massalski: Philos. Mag, 1961, Vol. 6, pp.669-82.10.1080/14786436108244417 ↗
20. T.B.Massalski, H.W.King: Prog. Mater. Sci., 1963, Vol.10, pp.1-78.10.1016/0079-6425(63)90008-2 ↗
21. R. Manaila, F. Zavaliche, R. Popescu, D. Macovei, A. Devenyi, C. Bunescu, E. Vasile, A. Jianu: Mater. Sci. Eng. A, 1997, Vol. 226-228, pp. 290-95.10.1016/S0921-5093(96)10632-8 ↗
22. N.K.Mukhopadhyay, D.Mukherjee, S.Bera, I. Manna, R.Manna: Mater. Sci. Eng. A, 2008, Vol. 485(1-2), pp. 673-80.10.1016/j.msea.2007.10.039 ↗
23. J.Andrade-Gamboa, F.C.Gennari, P.Larochette, C.Arneodo Neyertz, M.Ahlers, J.L. Pelegrina: Mater. Sci. Eng. A, 2007, Vol. 447(1-2), pp. 324-31.10.1016/j.msea.2006.10.134 ↗
24. S.Martelli, G.Mazzone, S.Scaglione, M.Vittori: J. Less-Comm. Met., 1988, Vol.145, pp.261-70.10.1016/0022-5088(88)90283-4 ↗
25. C.Y.Chung, M.Zhu, C.H.Man: Intermetallics, 2002, Vol.10(9), pp.865-71.10.1016/S0966-9795(02)00088-2 ↗
26. C. Suryanarayana: Prog. Mater. Sci. 2001, Vol. 46(1-2), pp.1-184.10.1016/S0079-6425(99)00010-9 ↗
27. M.Yono, H.Asano, N.Nakanish, S.Kachi: Trans. Jpn. Inst. Met., 1967, Vol. 8(4), pp. 277-78.10.2320/matertrans1960.8.277 ↗
28. T.B. Massalski: Binary Alloy Phase Diagrams, vol. 1–3, American Society for Metals, Materials Park, 1986.10.1007/BF02881154 ↗
29. T.B.Massalski: J. Phys. Paris, 1962, Vol. 23, pp. 647-49.
30. B.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley Publishing Company, Massachusetts, 1956.
31. R.A.Young: The Rietveld Method, Oxford University Press, Oxford, 1995.
32. B.F.Dyson: J. Appl. Phys., 1966, Vol. 37(6), pp. 2375-77.10.1063/1.1708821 ↗
33. H. Bakker, H.P. Bonzel, C.M. Bruff, M.A. Dayananda, W. Gust, J. Horvath, I. Kaur, G.V. Kidson, A.D. LeClaire, H. Mehrer, G.E. Murch, G. Neumann, N. Stolica, and N.A. Stolwijk: in Landolt–Bornstein Numerical Data and Functional Relationships in Science and Technology, Diffusion in Solid Metals and Alloys, vol. 26, O. Mandelung, ed., Springer, Berlin, 1990.
34. G.Martin: Phys. Rev. B, 1984, Vol. 30(3), pp. 1424-36.10.1103/PhysRevB.30.1424 ↗
35. G. Martin and P. Bellon: Driven Alloys in Solid State Physics, Academic Press, New York, 1996, p. 189.10.1016/S0081-1947(08)60605-0 ↗
36. C.Tomizuka, L.Slifkin: Phys. Rev., 1954, Vol. 96(3), pp. 610-15.10.1103/PhysRev.96.610 ↗
37. F. Delogu: J. Appl. Phys., 2008, Vol. 104(7), pp.73533-37.10.1063/1.2987476 ↗
38. K.Suzuki, S. Kano, M. Kajihara, N. Kurokawa, K.Sakamoto: Mater. Trans., 2005, Vol. 46(5), pp. 969-73.10.2320/matertrans.46.969 ↗
39. T.Takenaka, M. Kajihara: Mater. Trans.2006; Vol. 47(3), pp. 822-28.10.2320/matertrans.47.822 ↗
40. W.B.Pearson: Handbook of Lattice Spacings and Structure of Metals and Alloys, Vol. 1, New York, Pergamon Press, 1958.
41. J.Sheng, U.Welzel, E.J.Mittemeijer: Appl. Phys. Lett., 2010, Vol. 97: pp.1531091-93.10.1063/1.3500827 ↗
42. J.S.Vermaak, C.W.Mays, D.Kuhlmann, Surf. Sci. 1968, Vol.12, pp.128-33.10.1016/0039-6028(68)90118-0 ↗
43. C.W.Mays, J.S.Vermaak, D.Kuhlmann: Surf. Sci., 1968, Vol. 12, pp. 134-40.10.1016/0039-6028(68)90119-2 ↗
44. P.Lamparter, J.Mittemeijer: Int. J. Mater. Res. 2007, Vol. 98, pp.485-95.10.3139/146.101492 ↗
45. E. Zen: Am. Mineral. 1956, vol. 41, pp. 523–24.
46. I. Barin, O. Knacke, and O. Kubaschewski: Thermodynamic Properties of Inorganic Substance, Springer, Berlin, 1977.10.1007/978-3-662-02293-1 ↗
47. P.Y. Chevalier: Thermochim. Acta, 1988, Vol.136, pp.45-54.10.1016/0040-6031(88)87426-4 ↗
48. A.T.Dinsdale: CALPHAD, 1991, Vol. 15(4), pp.317-425.10.1016/0364-5916(91)90030-N ↗
49. J. Weissmüller, P. Bunzel, and G. Wilde: Scripta Mater., 2004, vol. 51, pp. 813–18.10.1016/j.scriptamat.2004.06.025 ↗
50. B.X.Liu, O.Jin: Phys. Status Solidi A, 1997, Vol. 161(3), pp. 3-33.10.1002/1521-396X(199705)161:1<3::AID-PSSA3>3.0.CO;2-U ↗
51. X.Y.Li, Z.F. Li, B.X.Liu: J. Alloy. Compd., 2002, Vol.334, pp.167-72.10.1016/S0925-8388(01)01770-4 ↗
52. X.Bai, T.L. Wang, N. Ding, J.H. Li, B.X. Liu: J. Appl. Phys. 2010, Vol.108, pp. 0735341-45.
53. S. Chithra, S. Lele, K. Chattopadhyay, Acta Mater., 2011, Vol. 59, pp. 2009-19.10.1016/j.actamat.2010.11.066 ↗
54. M.Green: Solid State Surface Science, Marcel Dekker, New York, 1973.
55. C.Srivastava, S.Chithra, K.D.Malviya, S.K.Sinha, K.Chattopadhyay: Acta Mater., 2011, Vol. 59, pp.6501-09.10.1016/j.actamat.2011.07.022 ↗
56. Q.Jiang, S.Zhang, M.Zhao: Mater. Chem. Phys., 2003, Vol. 80, pp.225-27.10.1016/S0254-0584(03)00201-3 ↗
57. G. Spur and T. Stöferle, eds.: Handbuch der Fertigungstechnik, vol. 4/2, Wärmebehandlung, Carl Hanser, Munich, 1987.
58. N.L.Pravoverov, I.A. Tribunskaya: Sov. Powder Metall+, 1969, vol. 8, pp.1006–11.10.1007/BF00802031 ↗