Microstructures, Mechanical Properties, and Shape Memory Characteristics of Powder Metallurgy Ti51Ni49 Modified with Boron
Source abstract
Abstract
Ti51Ni49 compacts consolidated with persistent liquid-phase sintering usually contain Ti2Ni networks at the grain boundaries, which cause adverse effects on mechanical properties. With 0.5 and 1.0 at pct B additions, fine TiB forms during heating and sintering and acts as a nucleation site for Ti2Ni to precipitate within the grain during cooling. The resultant uniform distribution of TiB and Ti2Ni impedes grain growth and prevents the formation of continuous Ti2Ni precipitates at grain boundaries. As a result, a significant increase in tensile elongation, and not a decrease, as in most as-cast titanium alloys, is obtained because of these changes. The tensile strength also increases, without deterioration of the shape memory characteristics. The tensile strength and elongation are close to those of wrought TiNi alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. M. Igharo and J.V. Wood: Powder Metall., 1985, vol. 28. pp. 131-39.10.1179/pom.1985.28.3.131 ↗
2. D.G. Morris and M.A. Morris: Mater. Sci. Eng. A, 1989, vol. 110, pp. 139-49.10.1016/0921-5093(89)90165-2 ↗
3. N. Zhang, P.B. Khosrovabadi, J.H. Lindenhovius, and B.H. Kolster: Mater. Sci. Eng. A, 1992, vol. 150, pp. 263-70.10.1016/0921-5093(92)90120-P ↗
4. J.C. Hey and A.P. Jardine: Mater. Sci. Eng. A, 1994, vol. 188, pp. 291-300.10.1016/0921-5093(94)90384-0 ↗
5. S.M. Green, D.M. Grant, and N.R. Kelly: Powder Metall., 1997, vol. 40, pp. 43-47.10.1179/pom.1997.40.1.43 ↗
6. F.C. Yen and K.S. Hwang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5296-5305.10.1016/j.msea.2011.03.028 ↗
7. F.C. Yen, K.S. Hwang, S.K. Wu, and S.H. Wu: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2431-41.10.1007/s11661-011-0612-4 ↗
8. J. Mentz, M. Bram, H.P. Buchkremer, and D. Stöver: Adv. Eng. Mater., 2006, vol. 8, pp. 247-52.10.1002/adem.200500258 ↗
9. L. Zhang, C. Xie, and J. Wu: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 905-10.10.1016/j.msea.2006.02.184 ↗
10. J. Mentz, J. Frenzel, M.F.-X. Wagner, K. Neuking, G. Eggeler, H.P. Buchkremer, and D. Stöver: Mater. Sci. Eng. A, 2008, vol. 491, pp. 270-78.10.1016/j.msea.2008.01.084 ↗
11. H.F. Lopez, A. Salinas, and H. Calderón: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 717-29.10.1007/s11661-001-1007-8 ↗
12. H. Kato, T. Koyari, M. Tokizane, and S. Miura: Acta Metall. Mater., 1994, vol. 42, pp. 1351-58.10.1016/0956-7151(94)90152-X ↗
13. J. Mentz, M. Bram, H.P. Buchkremer, and D. Stöver: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 630-34.10.1016/j.msea.2006.10.215 ↗
14. C. Zener: Trans. Metall. Soc. AIME, 1948, vol. 175, pp. 15-51.
15. Y. Suzuki, Y. Xu, S. Morito, K. Otsuka, and K. Mitose: Mater. Lett., 1998, vol. 36, pp. 85-94.10.1016/S0167-577X(98)00009-3 ↗
16. J. Zhu, A. Kamiya, T. Yamada, W. Shi, and K. Naganuma: Mater. Sci. Eng. A, 2003, vol. 339, pp. 53-62.10.1016/S0921-5093(02)00102-8 ↗
17. V.K. Chandravanshi, R. Sarkar, P. Ghosal, S.V. Kamat, and T.K. Nandy: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 936-46.10.1007/s11661-009-0155-0 ↗
18. D.J. Mceldowney, S. Tamirisakandala, and D.B. Miracle: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1003-15.10.1007/s11661-009-0157-y ↗
19. J. Frenzel, E.P. George, A. Dlouhy, Ch. Somsen, M.F.-X Wagner, and G. Eggeler: Acta Mater., 2010, vol. 58, pp. 3444-58.10.1016/j.actamat.2010.02.019 ↗
20. H.C. Lin and S.K. Wu: Scripta Metall. Mater., 1992, vol. 26, pp. 59-62.10.1016/0956-716X(92)90369-P ↗
21. M. Binnewies and E. Milke: Thermochemical Data of Elements and Compounds, 2nd ed., Wiley-VCH, Weinheim, Germany, 2002, pp. 102-16.10.1002/9783527618347 ↗
22. M.H. Mueller and H.W. Knott: Trans. Metall. Soc. AIME, 1963, vol. 227, pp. 674-78.
23. H.T. Takeshita, H. Tanaka, N. Kuriyama, T. Sakai, I. Uehara, and M. Haruta: J. Alloy Compd., 2000, vol. 311, pp. 188-93.10.1016/S0925-8388(00)01118-X ↗
24. R.W. Cahn and P. Haasen: Physical Metallurgy, 3rd ed., Elsevier Science, Atlanta, GA, 1983, pp. 1650-51.