journal article·2010-06

Biaxial Stretching Behavior of a Copper-Alloyed Interstitial-Free Steel by Bulge Test

R. Rana, S.B. Singh, W. Bleck, O.N. Mohanty

Publisher page

Abstract

Biaxial stretching behavior of a promising high-strength copper-alloyed interstitial-free (IF) steel has been investigated under various processing conditions using bulge tests. Hill theory and von Mises yield criterion have been used to analyze the results. It is revealed that copper-alloyed IF steel in continuous-annealed (CA) condition exhibits the highest equivalent strain at fracture and largest limiting dome height (LDH) among all the processing conditions. However, these values are lower in copper-alloyed interstitial steel than in traditional interstitial-free–high-strength (IF-HS) steels due to the presence of solute copper and copper precipitates in the former.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. S. Hoile: Mater. Sci. Technol., 2000, vol. 16, pp. 1079–93.10.1179/026708300101506902 ↗
2. K. Tsunoyama: Phys. Status Solidi (a), 1998, vol. 167, pp. 427–33.10.1002/(SICI)1521-396X(199806)167:2<427::AID-PSSA427>3.0.CO;2-I ↗
3. H. Takechi: ISIJ Int., 1994, vol. 34, pp. 1–8.10.2355/isijinternational.34.1 ↗
4. M. Hua, C.I. Garcia, and A.J. DeArdo: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1769–80.10.1007/s11661-997-0108-4 ↗
5. X. Yang, D. Vanderschueren, J. Dilewijns, and C. Standaert: ISIJ Int., 1996, vol. 36, pp. 1286–94.10.2355/isijinternational.36.1286 ↗
6. B.C. De Cooman and A. De Vyt: Proc. Int. Forum for the Properties and Application of IF Steels, H. Takechi, ed., ISIJ, Tokyo, 2003, pp. 249–58.
7. T. Senuma: ISIJ Int., 2001, vol. 41, pp. 520–32.10.2355/isijinternational.41.520 ↗
8. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Mater. Lett., 2007, vol. 61, pp. 2919–22.10.1016/j.matlet.2006.10.037 ↗
9. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Steel Res. Int., 2007, vol. 78, pp. 612–21.10.1002/srin.200706256 ↗
10. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Steel Res. Int., 2007, vol. 78, pp. 622–30.10.1002/srin.200706257 ↗
11. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Steel Res. Int., 2007, vol. 78, pp. 631–37.10.1002/srin.200706258 ↗
12. K. Kishida: Nippon Steel Tech. Rep., 1995, No. 64, pp. 33–35.
13. N. Maruyama, M. Sugiyama, T. Hara, and H. Tamehiro: Mater. Trans. JIM, 1999, vol. 40, pp. 268–77.10.2320/matertrans1989.40.268 ↗
14. E. Hornbogen and R.C. Glenn: Trans. TMS-AIME, 1960, vol. 218, pp. 1064–70.
15. S.R. Goodman, S.S. Brenner, and J.R. Low, Jr.: Metall. Trans., 1973, vol. 4, pp. 2363–78.10.1007/BF02669376 ↗
16. P.J. Othen, M.L. Jenkins, G.D.W. Smith, and W.J. Phythian: Phil. Mag. Lett., 1991, vol. 64, pp. 383–91.10.1080/09500839108215121 ↗
17. F. Maury, N. Lorenzelli, M.H. Mathon, C.H. De Novion, and P. Lagarde: J. Phys. Condens. Matter, 1994, vol. 6, pp. 569–88.10.1088/0953-8984/6/2/027 ↗
18. S. Pizzini, K.J. Roberts, W.J. Phythian, C.A. English, and G.N. Greaves: Phil. Mag. Lett., 1990, vol. 61, pp. 223–29.10.1080/09500839008202362 ↗
19. A. Deschamps, M. Militzer, and W.J. Poole: ISIJ Int., 2001, vol. 42, pp. 196–205.10.2355/isijinternational.41.196 ↗
20. R. Rana: Ph.D. Thesis, IIT, Kharagpur, India, 2008.
21. R. Rana, S.B. Singh, W. Bleck, and O.N. Mohanty: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 856–66.10.1007/s11661-008-9767-z ↗
22. W.T. Hosford and R.M. Caddel: Metal Forming Mechanics and Metallurgy, Prentice-Hall, Englewood Cliffs, NJ, 1983.
23. W. Bleck and M. Blumbach: Steel Res. Int., 2005, vol. 76, pp. 125–30.10.1002/srin.200505983 ↗
24. W.T. Lankford, S.C. Snyder, and J.A. Bauscher: Trans. ASM, 1950, vol. 42, pp. 1197–1225.
25. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill Book Company, London, 1988, p. 287.
26. F. Gologranc: Industrie Anzeiger, 1968, vol. 90, pp. 775–79.
27. F. Gologranc: Blech Rohre Profile, 1977, vol. 4, pp. 116–21.
28. G.M. Worral, J.T. Buswell, C.A. English, M.G. Hetherington, and G.D.W. Smith: J. Nucl. Mater., 1987, vol. 148, pp. 107–14.10.1016/0022-3115(87)90525-3 ↗
29. W.J. Phythian, S. Dumbill, P. Brown, and R. Sinclair: Proc. 6th Int. Symp. on Environmental Degradation in Nuclear Power Systems—Water Reactors, R.E. Gold and E.P. Simonen, eds., TMS, Warrendale, PA, 1993, pp. 729–37.
30. I.L. Dillamore, W.B. Hutchinson, and P.L. Morris: Proc. Effect of Second Phase Particles on the Mechanical Properties of Steel, Corporate Laboratories of the British Steel Corporation and the Iron and Steel Institute, Scarborough, United Kingdom, 1971, pp. 190–95.
31. X.F. Fang and W. Dahl: Mater. Sci. Eng. A, 1995, vol. A203, pp. 36–45.10.1016/0921-5093(95)09843-7 ↗
32. A. Deschamps, S. Esmaeili, W.J. Poole, and M. Militzer: J. Phys. IV, 2000, vol. 10, pp. 151–56.10.1051/jp4:2000626 ↗
33. D.H. Kang, D.-W. Kim, S. Kim, G.T. Bae, K.H. Kim, and N.J. Kim: Scripta Mater., 2009, vol. 61, 768–71.10.1016/j.scriptamat.2009.06.026 ↗