journal article·2014-04

Micromechanical Testing of Fracture Initiation Sites in Welded High-Strength Low-Alloy Steel

Bjørn Rune Sørås Rogne, Christian Thaulow, Afrooz Barnoush

Publisher page

Abstract

Micropillar compression tests were performed on martensite (M) and retained austenite (A) containing constituents formed in high-strength low-alloy steel after simulated thermal weld heat treatment. Due to the complicated fine microstructure of the constituent, the resulted stress–strain curves were further analyzed by considering the post-mortem scanning electron micrographs and the morphology of the deformation of the pillars. It was possible to obtain relevant data for the uniaxial stress–strain behavior of the M–A constituent in the studied steel. Microvickers measurements, which were converted to macroscopic yield stress by empirical relations, were compared with the micropillar compression test results. Comparison showed that these empirical relations are overestimating the obtained mechanical properties of the M–A constituents.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. C. Davis and J. King: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3019–29.10.1007/BF02663851 ↗
2. A. Lambert-Perlade, A. F. Gourgues, J. Besson, T. Sturel, and A. Pineau: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1039–53.10.1007/s11661-004-1007-6 ↗
3. H. Qiu, H. Mori, M. Enoki, and T. Kishi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2785–91.10.1007/BF02830338 ↗
4. P. Mohseni, J.K. Solberg, M. Karlsen, O.M. Akselsen, and E. Østby: Mater. Sci. Technol., 2012, vol. 28, pp. 1261–68.10.1179/1743284712Y.0000000056 ↗
5. O.M. Akselsen, J.K. Solberg, and O. Grong: Scand. J. Metall., 1988, vol. 17, pp. 194–200.
6. S. Moeinifar, A.H. Kokabi, and H.R. Madaah Hosseini: Mater. Des., 2010, vol. 31, pp. 2948–55.10.1016/j.matdes.2009.12.023 ↗
7. C.L. Davis and J.E. King: Mater. Sci. Technol., 1993, vol. 9, pp. 8–15.10.1179/mst.1993.9.1.8 ↗
8. J.H. Chen, Y. Kikuta, T. Araki, M. Yoneda, and Y. Matsuda: Acta Metall., 1984, vol. 32, pp. 1779–88.10.1016/0001-6160(84)90234-7 ↗
9. O.M. Akselsen, Ø. Grong, and J.K. Solberg: Mater. Sci. Technol., 1987, vol. 3, pp. 649–55.10.1179/mst.1987.3.8.649 ↗
10. Y. Li and T.N. Baker: Mater. Sci. Technol., 2010, vol. 26, pp. 1029–40.10.1179/026708309X12512744154360 ↗
11. C.L. Davis and J.E. King: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 563–73.10.1007/BF02651598 ↗
12. A. Martín-Meizoso, I. Ocaña Arizcorreta, J. Gil-Sevillano, M. Fuentes-Pérez: Acta Metall. Mater., 1994, vol. 42, pp. 2057–68.10.1016/0956-7151(94)90031-0 ↗
13. A. Pineau: Int. J. Fract., 2006, vol. 138, pp. 139–66.10.1007/s10704-006-0035-1 ↗
14. Y.I. Golovin: Phys. Solid State, 2008, vol. 50, pp. 2205–36.10.1134/S1063783408120019 ↗
15. O. Franke, K. Durst, and M. Göken: Mater. Sci. Eng. A, 2007, vol. 467, pp. 15–23.10.1016/j.msea.2007.02.069 ↗
16. D.F. Bahr and G. Vasquez: J. Mater. Res., 2005, vol. 20, pp. 1947–51.10.1557/JMR.2005.0244 ↗
17. O. Franke, K. Durst, and M. Göken: J. Mater. Res., 2009, vol. 24, pp. 1127–34.10.1557/jmr.2009.0135 ↗
18. H.X. Guo, B.T. Lu, and J.L. Luo: Electrochem. Commun., 2006, vol. 8, pp. 1092–98.10.1016/j.elecom.2006.04.020 ↗
19. D.F. Bahr, J.C. Nelson, N.I. Tymiak, and W.W. Gerberich: J. Mater. Res., 1997, vol. 12, pp. 3345–53.10.1557/JMR.1997.0439 ↗
20. A. Barnoush and H. Vehoff: Acta Mater., 2010, vol. 58, pp. 5274–85.10.1016/j.actamat.2010.05.057 ↗
21. S.K. Venkataraman, D.L. Kohlstedt, and W.W. Gerberich: J. Mater. Res., 1993, vol. 8, pp. 685–88.10.1557/JMR.1993.0685 ↗
22. K. Durst, B. Backes, O. Franke, and M. Göken: Acta Mater., 2006, vol. 54, pp. 2547–55.10.1016/j.actamat.2006.01.036 ↗
23. K. Durst, M. Göken, and G.M. Pharr: J. Phys. D, 2008, vol. 41, pp. 1–5.10.1088/0022-3727/41/7/074005 ↗
24. P. Sadrabadi, K. Durst, and M. Göken: Acta Mater., 2009, vol. 57, pp. 1281–89.10.1016/j.actamat.2008.11.015 ↗
25. E. Nadgorny, D. Dimiduk, and M. Uchic: J. Mater. Res., 2008, vol. 23, pp. 2829–35.10.1557/JMR.2008.0349 ↗
26. W.D. Nix and H. Gao: J. Mech. Phys. Solids, 1998, vol. 46, pp. 411–25.10.1016/S0022-5096(97)00086-0 ↗
27. A. Barnoush: Acta Mater., 2012, vol. 60, pp. 1268–77.10.1016/j.actamat.2011.11.034 ↗
28. A. Barnoush, M.T. Welsch, and H. Vehoff: Scripta Mater.., 2010, vol. 63, pp. 465–68.10.1016/j.scriptamat.2010.04.048 ↗
29. S. Shim, H. Bei, E.P. George, and G.M. Pharr: Scripta Mater., 2008, vol. 59, pp. 1095–98.10.1016/j.scriptamat.2008.07.026 ↗
30. K.A. Nibur, D.F. Bahr, and B.P. Somerday: Acta Mater., 2006, vol. 54, pp. 2677–84.10.1016/j.actamat.2006.02.007 ↗
31. L. Zhang, B. An, S. Fukuyama, and K. Yokogawa: Jpn. J. Appl. Phys., 2009, vol. 48, pp. 08JB08/1–4.10.1143/JJAP.48.08JB08 ↗
32. A. Barnoush, M. Asgari, and R. Johnsen: Scripta Mater., 2012, vol. 66, pp. 414–17.10.1016/j.scriptamat.2011.12.004 ↗
33. Y. Yao, L.J. Qiao, and A.A. Volinsky: Corros. Sci., 2011, vol. 53, pp. 2679–83.10.1016/j.corsci.2011.05.025 ↗
34. M.D. Uchic, D.M. Dimiduk, J.N. Florando, and W.D. Nix: Science, 2004, vol. 305, pp. 986–89.10.1126/science.1098993 ↗
35. M.D. Uchic and D.A. Dimiduk: Mater. Sci. Eng. A, 2005, vol. 400, pp. 268–78.10.1016/j.msea.2005.03.082 ↗
36. J.R. Greer, W.C. Oliver, and W.D. Nix: Acta Mater., 2005, vol. 53, pp. 1821–30.10.1016/j.actamat.2004.12.031 ↗
37. C.A. Volkert and E.T. Lilleodden: Philos. Mag., 2006, vol. 86, pp. 5567–79.10.1080/14786430600567739 ↗
38. A. Barnoush, J. Dake, N. Kheradmand, and H. Vehoff: Intermetallics, 2010, vol. 18, pp. 1385–89.10.1016/j.intermet.2010.01.001 ↗
39. N. Kheradmand, A. Barnoush, and H. Vehoff: J. Phys. Conf. Ser., 2010, vol. 240, pp. 012017/1–4.10.1088/1742-6596/240/1/012017 ↗
40. S.P. Astad: Project Work (in Norwegian), Norwegian University of Science and Technology, Trondheim, Norway, 2009.
41. N. Kheradmand and H. Vehoff: Adv. Eng. Mater., 2012, vol. 14, pp. 153–61.10.1002/adem.201100242 ↗
42. I.N. Sneddon: Int. J. Eng. Sci., 1965, vol. 3, pp. 47–57.10.1016/0020-7225(65)90019-4 ↗
43. H. Zhang, B.E. Schuster, Q. Wei, and K.T. Ramesh: Scripta Mater., 2006, vol. 54, pp. 181–86.10.1016/j.scriptamat.2005.06.043 ↗
44. C.P. Frick, B.G. Clark, S. Orso, A.S. Schneider, and E. Arzt: Mater. Sci. Eng. A, 2008, vol. 489, pp. 319–29.10.1016/j.msea.2007.12.038 ↗
45. S.-W. Lee, S.M. Han, and W.D. Nix: Acta Mater., 2009, vol. 57, pp. 4404–15.10.1016/j.actamat.2009.06.002 ↗
46. A.S. Schneider, B.G. Clark, C.P. Frick, P.A. Gruber, and E. Arzt: Philos. Mag. Lett., 2010, vol. 90, pp. 841–49.10.1080/09500839.2010.508445 ↗
47. A.S. Schneider, D. Kiener, C.M. Yakacki, H.J. Maier, P.A. Gruber, N. Tamura, M. Kunz, A.M. Minor, and C.P. Frick: Mater. Sci. Eng. A, 2013, vol. 559, pp. 147–58.10.1016/j.msea.2012.08.055 ↗
48. J.L. Stewart, L. Jiang, J.J. Williams, and N. Chawla: Mater. Sci. Eng. A, 2012, vol. 534, pp. 220–27.10.1016/j.msea.2011.11.062 ↗
49. J.Y. Zhang, G. Liu, and J. Sun: Int. J. Plast., 2013, vol. 50, pp. 1–17.10.1016/j.ijplas.2013.03.009 ↗
50. V. Haugen, B.R.S. Rogne, O.M. Akselsen, C. Thaulow, and E. Østby: Proceedings of 22nd International Offshore and Polar Engineering Conference, Rhodes, Greece, ISOPE 2012, 2012, pp. 16–22.
51. Y. Mine, K. Hirashita, H. Takashima, M. Matsuda, and K. Takashima: Mater. Sci. Eng. A, 2013, vol. 560, pp. 535–44.10.1016/j.msea.2012.09.099 ↗
52. E.J. Pavlina and C.J. Van Tyne: J. Mater. Eng. Perform., 2008, vol. 17, pp. 888–93.10.1007/s11665-008-9225-5 ↗