journal article·2000-03

Phase analysis of two steel work rolls using Mössbauer spectroscopy

Sei Jin Oh, Soon-Ju Kwon, Hongsug Oh, Sunghak Lee, Keun Chul Hwang

Publisher page

Abstract

Responding to an increasing demand lately in the hot rolling process to produce rolled steel plates with homogeneous thickness and even surface and to improve the productivity, continuous studies on developing rolls with enhanced properties in wear resistance, strength, fracture toughness, and thermal fatigue have been made. Because rolls are cast in large sizes and cannot go through a subsequent hot deformation process, the cost structure composed of coarse carbides is retained, and the matrix alone is transformed into tempered martensite by austenitization and tempering treatments. Heat-treated rolls are affected by various factors such as chemical composition, casting conditions, and heat-treatment condition, and thus have a complex structure with many phases such as carbides, tempered martensite, austenite, pearlite, and graphite. Although most coarse carbides are not influenced by heat treatment, retained austenite formed after austenitization seriously deteriorates hardness and wear resistance. Therefore, it is required to carefully analyze the microstructural changes varying with the casting and heat-treatment conditions, together with particular emphasis on the elimination of austenite after heat treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. W.H. Betts and H.L. Baxter: in Roll for the Metal Working Industries, R.B. Corbett, ed., ISS, Warrendale, PA, 1990, pp. 23–30.
2. M. Hashimoto: What’s New in Roll Technologies of the World?, The Iron and Steel Institute of Japan, Tokyo, 1995, pp. 59–66.
3. T. Koseki, Y. Kataoka, Y. Sawa, K. Ichino, K. Amano, and N. Miyai: What’s New in Roll Technologies of the World?, The Iron and Steel Institute of Japan, Tokyo, 1995, pp. 67–77.
4. S. Lee, D.H. Kim, J.H. Ryu, and K.: Shin Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2595–2608.10.1007/s11661-997-0017-6 ↗
5. S. Lee, K.-S. Sohn, C.G. Lee, and B.I. Jung: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 123–34.10.1007/s11661-997-0088-4 ↗
6. K.C. Hwang, S. Lee, and H.C. Lee: Mater. Sci. Eng. A, 1998, vol. A254, pp. 282–95.10.1016/S0921-5093(98)00626-1 ↗
7. L. May: in An Introduction to Mössbauer Spectroscopy, U. Goner, ed., Plenum Press, New York, NY, 1971, pp. 155–79.10.1007/978-1-4684-8911-8 ↗
8. G.J. Long: in Mössbauer Spectroscopy Applied to Inorganic Chemistry, G.J. Long, ed., Plenum Press, New York, NY, 1984, pp. 7–26.10.1007/978-1-4899-0462-1_2 ↗
9. J.R. Genin: Metall. Trans. A, 1987, vol. 18A, pp. 1371–88.10.1007/BF02646651 ↗
10. H. Ino, T. Moriya, F.E. Fujita, Y, Maeda, Y. Ono, and Y. Inokuti: J. Phys. Soc. Jpn., 1968, vol. 25, pp. 88–99.10.1143/JPSJ.25.88 ↗
11. M. Ron and Z. Mathalone: Phys. Rev. B, 1971, vol. 4, pp. 774–77.10.1103/PhysRevB.4.774 ↗
12. F. Aubertin, L. Abada, and U. Gonser: Hyp. Int., 1998, vol. 111, pp. 201–4.10.1023/A:1012605717721 ↗
13. M. Ron, H. Shechter, and S. Niedzwidz: J. Appl. Phys., 1968, vol. 39, pp. 265–75.10.1063/1.1655743 ↗
14. H. Bernas, I.A. Campbell, and R. Fruchart: J. Phys. Chem. Solids, 1975, vol. 28, pp. 17–25.10.1016/0022-3697(67)90192-8 ↗
15. B. Fultz: in Mössbauer Spectroscopy Applied to Magnetism and Materials Science, G.J. Long and F. Grandjean, eds., Plenum Press, New York, NY, 1993, pp. 1–31.
16. Peakfit, Jandel Scientific Software, San Rafael, CA, 1995.
17. ICDD (International Center for Diffraction Data) Reference Diffraction Pattern, H.M. Ondik and A.D. Mighell, eds., Publishers of the Powder Diffraction File, Newton Square, PA, 1995.
18. G. Byun, S. Oh, C.G. Lee, and S. Lee: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 234–53.10.1007/s11661-999-0212-8 ↗
19. J.C. Werquin and J.C. Caillaud: in Rolls for the Metal Working Industries, R.B. Corbett, ed., ISS, Warrendale, PA, 1990, ch. 4.
20. H. Baker, H. Okanoto, S.C. Henry, G.M. Davidson, M.A. Fleming, L. Kacprzak, and H.F. Lampman: ASM Handbook, ASM INTERNATIONAL, Materials Park, OH, 1992, vol. 3, sect. 4.10.