journal article·2009-05

Optimization of Galvannealing Parameters through Numerical Modeling of Galvannealing Process

A. K. Verma, Sanjay Chandra, N. Bandyopadhyay, B. K. Dhindaw, R. D. K. Misra

Publisher page

Abstract

In the galvannealing process, a galvanized sheet is subjected to an annealing treatment to transform the zinc-coated steel sheet to iron-zinc alloy-coated steel. In the present work, the galvannealing process has been treated as a binary multiphase diffusional phase transformation reaction, and a rigorous mathematical model has been developed to simulate the galvannealing process. The results obtained by the model have been compared with experimental as well as plant data, and the results have been found to be in good agreement. The model prediction shows that the excessive growth of undesirable Γ and Γ1 phases takes place when the iron content in the coating exceeds around 11 pct during galvannealing. It has also been observed that decreasing the line speed to obtain the desired iron content in the coating leads to excessive growth of the undesirable Γ and Γ1 phases. It has been concluded that the developed mathematical model can be used to optimize the galvannealing parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Advanced Welding Techniques Analysis · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. P. Howe and S.C. Kelley: SAE Technical Paper No. 880280, SAE, Warrendale, PA, 1988.
2. D.K. Kim, and H. Leidheiser: J. Met., 1976, vol. 28 (11), pp. 19–25.
3. S.H. Deits, and D.K. Matlock: in Zinc-Based Steel Coating Systems: Metallurgy and Performance, G. Krauss, and D.K. Matlock, eds., TMS, Warrendale, PA, 1990, pp. 297–306.
4. A.R. Marder: Prog. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
5. J. Mackowiak, and N.R. Short: Int. Met. Rev., 1979, vol. 24, pp. 1–19.10.1179/095066079790136327 ↗
6. R. Brisberger, H. Berndsen, U. Etzold, O. Maid, and W. Warnecke: The Use and Manufacture of Zinc and Zinc Alloy Coated Sheet Steel Products into the 21st Century, Galvatech ’95 Conf. Proc., Chicago, IL, 1995, pp. 753–59.
7. M. Sakurai, L.W. Zhang, Y. Tajiri, and T. Kondo: Tetsu-to-Hagané, 1991, vol. 77, pp. 979–86.10.2355/tetsutohagane1955.77.7_979 ↗
8. E. Gallo and D.K. Matlock: The Use and Manufacture of Zinc and Zinc Alloy Coated Sheet Steel Products Into the 21st Century, Galvatech ’95 Conf. Proc., Chicago, IL, 1995, pp. 739–48.
9. J. Crank: Free and Moving Boundary Problems, Clarendon Press, Oxford, United Kingdom, 1984.
10. P.R. Rios: ISIJ Int., 1996, vol. 36, pp. 361–62.10.2355/isijinternational.36.361 ↗
11. C.R. Xavier, U.R. Seixas, and P.R. Rios: ISIJ Int., 1996, vol. 36, pp. 1316–17.10.2355/isijinternational.36.1316 ↗
12. P.R. Rios: Proc. 5th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Galvatech 2001, Brussels, Belgium, 2001, pp. 519–25.
13. G. Ferran, and P.R. Rios: ISIJ Int., 2000, vol. 40, pp. 932–34.10.2355/isijinternational.40.932 ↗
14. T.R. Bensinger, L. Zhang, E.M. Franke-Polz, and M.D. Strayer: Surface Modification Technologies VI, Chicago, IL, 1993, T.S. Sudarshan and J.F. Braza, eds., pp. 361–75.
15. L. Zhang, T.R. Bensinger, E.M. Franke-Polz, and M.D. Strayer: Galvatech ’92 Conf. Proc., 2nd Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Amsterdam, Netherlands, 1992, pp. 215–19.
16. M. Lamberigts, V. Leroy, M. Beguin, M. Dubois, A. van der Heiden, and G. Verhoeven: Galvatech ’92 Conf. Proc., 2nd Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Amsterdam, Netherlands, 1992, pp. 199–203.
17. Syahbuddin, P.R. Munroe, C.S. Laksmi, and B. Gleeson: Mater. Sci. Eng., 1998, vol. A251, pp. 87–93.10.1016/S0921-5093(98)00641-8 ↗
18. T. Shimozaki, Y. Wakamatsu, and M. Onishi: ISIJ Int., 1993, vol. 33, pp. 1003–08.10.2355/isijinternational.33.1003 ↗
19. U. Chakkingal, and R.N. Wright: The Use and Manufacture of Zinc and Zinc Alloy Coated Sheet Steel Products Into the 21st Century, Galvatech ’95 Conf. Proc., Chicago, IL, 1995, pp. 823–29.
20. U. Chakkingal: Ph.D. Thesis, Rensselaer Polytechnic Institute, 1994.
21. W.D. Murray, and F. Landis: J. Heat Transfer, 1959, vol. 81C, pp. 106–12.10.1115/1.4008149 ↗
22. S. Crusius, G.Inden, U. Knoop, L. Hoglund, and J. Agren: Z. Metallkd., 1992, vol. 83, pp. 673–78.
23. J. Crank: Q. J. Mech. Appl. Math., 1957, vol. 10, pp. 220–31.10.1093/qjmam/10.2.220 ↗
24. A.K. Verma, S. Chandra, and B.K. Dhindaw: Appl. Math. Comput., 2004, vol. 158, pp. 573–84.10.1016/j.amc.2003.10.001 ↗
25. A.K. Verma, S. Chandra, and B.K. Dhindaw: Mater. Sci. Technol., 2005, vol. 11, pp. 1303–08.10.1179/174328405X66969 ↗
26. O. Kubaschewski: Iron-Binary Phase Diagrams, Springer-Verlag, New York, NY, 1982, pp. 87–89.
27. Y. Wakamatsu, K. Samura, and M Onishi: J. Jpn. Inst. Metall., 1977, vol. 41, pp. 664–69.10.2320/jinstmet1952.41.7_664 ↗
28. C.E. Jordan, and A.R. Marder: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 937–47.10.1007/BF02652269 ↗
29. C.S. Lin, M. Meshii, and C.C. Cheng: ISIJ Int., 1995, vol. 35, pp. 503–11.10.2355/isijinternational.35.503 ↗
30. C.S. Lin, M. Meshii, and C.C. Cheng: The Use and Manufacture of Zinc and Zinc Alloy Coated Sheet Steel Products Into the 21st Century, Galvatech ’95 Conf. Proc., Chicago, IL, 1995, pp. 485–95.